二手 BATTENFELD 出售

Brand: Battenfeld Injection molding machine working Production until October 2021

Battenfeld TM3500/1900 Injection moulding machine Used battenfeld machine for sale, machine is unplugged, but it was in good working condition

Control B4 1. Plasticizing system with a diameter of Ø45mm, mounted in a screw with increased homogenization of the material - with a barrier zone and an additional PMT mixer 2. (03.G04) Plasticizing unit with increased resistance to abrasion and corrosion. Applies to cylinder and worm in standard Battenfeld design (original worm is also delivered as a set). 3. (06.X17) UNILOG B4 HM Europackage consisting of: - 07.D00 setting elements, - 02.K02 air valve controlled as a function of time - 01.C01 hydraulic core control NW 6 on closing plate - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet. - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet. - 06.B21 robot connection according to Euromap 67 - 06.D10 charging zone temperature set from the level of the control system 4. 06.K40 Quality table 5. 06.K01 Graphic functions of a ...

Brand BATTENFELD Type EM 75-120 Unilog B4 All-electric Year of manufacture 2005 Clamping unit Clamping force 75 ton Opening stroke 800 mm Beam dimension (h x v) 405 x 405 mm Installation height min. 150 mm Installation height max. 480 mm Injection unit Screw diameter 18 mm Injection volume 30 cm³ Injection weight PS 27 gr Injection pressure 2440 bar Dimensions and weights Dimensions LxWxH 4.5 x 1.7 x 2.0 m Machine weight 4500 kg

Screw diameter: 35 mm Calculated injection volume: 144 cm³ Length/diameter ratio: 22 L/D Pressure on the material: 1500 bars Screw speed: 150 RPM CLOSING UNIT Closing force: 450 kN Opening stroke: 375 mm Mini /Max Mold Thickness: 175 mm Max distance between tray: 550 mm Passage between columns: 320 x 270 mm

Battenfeld TM 550/4500 Injection Moulding Machine 550 Ton 55 Kw Working hour: 48500

Manufacturer Battenfeld Model BK-T 1300 / 630 Year 1995 Machine is in good condition 130 Ton

Important Note: The following description provides additional technical details about the Battenfeld TM 1300/525 M Injection Molding Machine beyond the core offer. This information is intended to assist buyers in making an informed decision. Core Offer: For professionals seeking a reliable injection molding machine, the Battenfeld TM 1300/525 M offers exceptional performance. Its specifications include: Clamping Force: 1300 kN Mounting Plate Dimensions (hxv): 670 x 670 mm Clearance Between Columns (hxv): 470 x 470 mm Min./Max. Mold Height: 225-500 mm Maximum Opening Width: 930 mm Injection Unit: Screw Diameter: 40 mm Injection Volume: 251 ccm Injection Weight: 228 g Injection Pressure: 2100 bar Electrical and Hydraulic Equipment: Rated Power of the Pump Motor: 18.5 kW Heater Power: 12.1 kW Dimensions (L x W x H): 4.9m x 1.33m x 2m Net Weight with Control Cabinet: 4.8 ...

Battenfeld TM 3500 / 1900 Closing unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] 300-710 Maximum opening width [mm] 1380 Injection unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions and weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7.60 x 1.80 x 2.40

Clamping force [kN] 350 Clearance between columns (hxv) [mm] 320 x 270 Min./max. mold height [mm] min 235 Maximum opening width [mm] 585 Injection unit Screw diameter [mm] 18 Injection volume [cm3] 20 Shot weight [g] 19 Injection pressure [bar] 2500 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,15 Dimensions (L x W x H) [m] 3,33 x 1 x 1,85

Producer Battenfeld Type 25/50 Unilog B2 Year 2006 Clamping unit Clamping force 25 ton Opening stroke 450 mm Distance between tie bars 270 X 270 mm Mould height min. 150 mm Injection unit Screw diameter 14 mm Injection volume 15 cm³ Shot weight 7 g Injection pressure 2650 bar Measurements and weight Dimensions 2,25 X 0,90 X 1,30 m Machine weight 1100 kg

Injection unit Screw diameter: 50 mm Closing unit Closing force : 1800 kN Distance between tie-bars: 560 x 560 mm Other Commissioning: 1998 Tonnage: 180

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 760 x 755 Clearance between columns (hxv) [mm] 520 x 470 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 358 Injection weight [g] 325 Injection pressure [bar] 2116 Electrical and hydraulic equipment Rated power of the pump motor [kW] 22 Heater power [kW] 13.9 Dimensions and weight Net weight with control cabinet [t] 6.6 Dimensions (length x width x height) [m] 4.6 x 1.6 x 2.2

Battenfeld TM Xpress 270/1350 injection molding machine is on sale 2011 Battenfeld TM Xpress 270/1350 Injection molding machine

Battenfeld HM 500/5100 injection molding machine Closing unit Clamping force [kN] 5000 Dimensions of mounting plates (hxv) [mm] 1470 x 1260 Clearance between columns (hxv) [mm] 900 x 720 Min./max. mold height [mm] min 450 Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 85 Injection volume [cm3] 2412 Injection weight [g] 2195 Injection pressure [bar] 2110 Electrical and hydraulic equipment Rated power of the pump motor [kW] 75 Heater power [kW] 37.3 Dimensions and weight Net weight with control cabinet [t] 26 Dimensions (L x W x H) [m] 6.9 x 2.4 x 3 m Instrumentation: EUROMAP 67 robot connection 1 x hydraulic core on fixed plate 1 x hydraulic core on moving plate 8 x hot runner controls bimetal injection system ejection plate

BATTENFELD 400/150 S-KS /… / 12/80 injection molding machine Year of prod. 1981 The machine is fully operational, not used for 5 years, ready for transport

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

Manufacturer : BATTENFELD Model: 100T TM 1000 / 525 Year of manufacture: 2000 Screw diameter: 40 mm Closing force: 1000 kN

Used Battenfeld machine for sale, old but low hours Battenfeld BK-T 1800/1000 Injection moulding machine

Closing unit Clamping force [kN] 2000 Dimensions of mounting plates (hxv) [mm] 800 x 800 Clearance between columns (hxv) [mm] 560 x 560 Min./max. mold height [mm] 220-520 Maximum opening width [mm] 970 Injection unit Screw diameter [mm] 55mm Injection volume [cm3] 522 Injection weight [g] 595 Injection pressure [bar] 1943 Electrical and hydraulic equipment Rated power of the pump motor [kW] 30 Heater power [kW] 22.6 Dimensions and weight Net weight with control cabinet [t] 9.8 Dimensions (L x W x H) [m] 5.65 m x 1.45 m x 2.10 m

Battenfeld Microsystem 50 injection molding machine Year of production - 2001 Unilog B4 control technical data of the clamping unit, clamping force: 50 kN size of mold plates h: 364 mm mold plate size v: 196 mm min. mold height: 100 mm max. open daylight: 300 mm opening stroke: 200 mm technical data of the injection unit screw diameter: 14 mm injection volume: 1.1cc injection pressure: 2,500 bar measures and weight machine dimensions lxbxh: 1.862 m x 0.81 m x 2.428 m total weight: 1050KG

Battenfeld BA 1000/200 CDC Closing unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 640 x 590 Clearance between columns (hxv) [mm] 370 x 420 Min./max. mold height [mm] min 250 Maximum opening width [mm] 725 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 175.9 Injection weight [g] 160 Injection pressure [bar] 1137 Electrical and hydraulic equipment Rated power of the pump motor [kW] 11.2 Heater power [kW] 7.88 Dimensions and weight Net weight with control cabinet [t] 4.3 Dimensions (L x W x H) [m] 4.4 x 1.8 x 1.8

Battenfeld TM 750/210 Closing unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./max. mold height [mm] 200 Maximum opening width [mm] 730 Injection unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g] 95 Injection pressure [bar] 2042 Dimensions and weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Clamping force [kN] 250 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 270 x 270 Min./max. mold height [mm] min125mm Maximum opening width [mm] 450 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Battenfeld HM 60/350S injection molding machine – year of production 2008 – 41421h number – working hours worked. Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 550 x 530 Clearance between columns (hxv) [mm] 370 x 320 injection unit Screw diameter [mm] 35 Injection volume [cm3] 169 Injection weight [g] 153.8 Injection pressure [bar] 2083 Electric-hydraulic equipment Nominal power of the pump motor [kW] 15 Heater power [kW] 10.4 Dimensions and weight Net weight with control cabinet [t] 3.1 Dimensions (L x W x H) [m] 3.79x1.24x1.88 – control b6

INJECTION UNIT Screw diameter: 35 mm Calculated injection volume: 169 cm³ Pressure on the material: 2083 bars CLOSING UNIT Closing force: 1000 kN Mini /Max Mold Thickness: 250-600 mm Passage between columns: 470 x 420 mm EQUIPMENT PROCESS B 6 EUROMAP 67 1 Core Central ejection

800t clamping force Battenfeld machine, year 2008 The machine was used for a project in the auto industry but the last months there is no work for this machine. Clamping force 800.0 T Screw diameter 85.0 Tie bar spacing (H) 1120.0 Tie bar spacing (V) 1020.0 Shot volume 2412.0 Shot weight 2195.0 Pressure on material 2110.0 bar Platen length 1620.0 Platen width 1530.0 Robot interface E67 Number of cores 4.0 Number of heating zones

TM 2500/750 Plastic Injection Molding Machine 250 tons Width between columns 57cm, height 55cm Brand: Battenfeld Year : 2000

Robotic - NO Control - B4 Screw diameter - 75 [mm] Specific injection pressure - 1739 [bar] Injection volume - 1657 [cm3] Injection weight - 1508 [g] Injection unit - 2800 [mm] Closing force - 4500 [T] Tool Locking System - Knee System Tool plate size - 1120 [mm] Clearance between columns - 800 [mm] Opening distance - 760 [mm] Maximum distance between plates - 1530 [mm] Ejector stroke - 250 [mm] Pump capacity - 55 [kVA] Tank heating system power - 43 [kVA] Controls and description - ENGLISH Full documentation - YES Hours worked - 76 200 Pickup date - 6 months Dimensions (length x width x height) - 8255 x 1795 x 2330 [mm] Weight - 20 400 [kg] The machine has a new cooler, hydraulic accumulators. The pump is regenerated. The machine will be available in February 2021.

Used Battenfeld for sale, it has broblem with frequency converter the pump motor is not working as it should Battenfeld BK-T 2750/1000 Injection moulding machine

TM 2700/1330 Plastic Injection Molding Machine 270 tons Width between columns 64cm, height 62cm Brand: Battenfeld Year : 2004

Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1155x1195 Clearance between columns (hxv) [mm] 800x800 Min./max. mold height [mm] min 425/max 770 Maximum opening width [mm] 1530 Injection unit Screw diameter [mm] 75 Injection volume [cm3] 1657 Injection weight [g] 1506 Injection pressure [bar] 1739

Clamping force [kN] 1000 Clearance between columns (hxv) [mm] 420 x 370 min./ max. mold height [mm] 230-730 Maximum opening width [mm] 500 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection weight [g] 250 Electric-hydraulic equipment Rated power of the pump motor [kW] 18.4 Heater power [kW] 18.4 Dimensions and weight Dimensions (L x W x H) [m] 4.3 x 1.5 x 2.0 m

Battenfeld HM 500/3400 S injection molding machine Year of production - 2006 Control: Unilog B6 Injection unit… / 3400 S Screw diameter: 65 mm Specific injection pressure: 2500 bar Injection volume: 1244 ccm Shot weight: 1070 g Crimping 500 / ... Strength: 500 t Board dimensions: 1590 x 1470 mm Clearance between columns: 1000 x 800 mm Tool height: 450… 1600 mm Opening for a path of 1150 mm Distance plates: 1600 mm - 1 x pneumatic valve - 1 x NW6 hydraulic core movable plate - Connection via robot. Euromap 67

Clamping force [kN] 5500 Dimensions of mounting plates (hxv) [mm] 1280 X 1280 Clearance between columns (hxv) [mm] 900 X 900 min./ max. mold height [mm] min 450 max 800 Maximum opening width [mm] 900 injection unit Screw diameter [mm] 85 Injection volume [cm3] 2128 Injection weight [g] 1936 Injection pressure [bar] 1354

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...

INJECTION UNIT Screw diameter: 85 mm Calculated injection volume: 2128 cm³ Length / diameter ratio: L / D Pressure on the material: 1624 bars CLOSING UNIT Closing force: 4500 kN Opening stroke: 950 mm Mold thickness Mini / Max: 970 mm Passage between columns: 900 x 800 mm EQUIPMENT Extended press for a mold thickness of 970 mm and opening of 950 mm UNILOG B4 command

TM 1600/1000 Plastic Injection Molding Machine 160 tons Width between columns 53cm, height 50cm Brand: Battenfeld 2000 model

Battenfeld TM 1300/750 injection moulding machine 130 tons Width between columns 47cm, height 46cm Brand: Battenfeld 2000 model

Battenfeld HM 300/2250 Year: 2009 Type of control: Unilog B6S Number of hours: 17,463H Closing Closing force: 300 T Opening stroke: 900 mm Between columns: 1030 x 1100 mm Mini/maxi mould: 225 mm Max gap between trays: 1125 mm Injection: Screw diameter: 65 mm cm3: 1078 Bars: 2075 General: Motor power: 46kw Heating power: 26.6kw Weight: 14.6T Dimensions length: 6.18 m Dimensions width: 2.5 m Dimensions height: 2.3 m Options: Cores: 3 Robot interface: YES Bi metal: YES Others: 1 BLOWER

二手机器状况良好。可立即交付。 - 锁模力： 1.600 kN - 螺杆直径：50毫米 - 注射压力：1.714巴 - 注射量：442厘米？ - 拉杆间距 （高 x 宽）： 570 x 520 mm

Unused Control UNIROB B4 (8.4 TFT touch screen) X axis=1000 (39.4) with servo motor Y axis=1000+1000 (78.7) with servo motor Z axis=4000 (127.5) with servo motor Movement interpolation. Repetition accuracy of +/- 0.1 mm. Maximum weight including gripper: 20 kg. Pneumatic pressure: 6 bars Maximum speed: 3,000 mm/s. Interface: EUROMAP 67 - Interface: EUROMAP 67 - Control: UNIROB B4 - Stroke (X): 1.000 (39,4) with servo mm - Stroke (Y): 1.000+1.000 (78.7) with servo mm - Stroke (Z): 4.000 (127,5) with servo mm - Take-out speed: 3.000 mm/s - Payload: 20 Kg