| 描述: |
注塑机 Battenfeld HM 160/525E
二手机
Control B4
1. Plasticizing system with a diameter of Ã45mm, mounted in a screw
with increased homogenization of the material - with a barrier zone
and an additional PMT mixer
2. (03.G04) Plasticizing unit with increased resistance to abrasion
and corrosion. Applies to cylinder and worm in standard Battenfeld
design (original worm is also delivered as a set).
3. (06.X17) UNILOG B4 HM Europackage consisting of:
- 07.D00 setting elements,
- 02.K02 air valve controlled as a function of time
- 01.C01 hydraulic core control NW 6 on closing plate
- 06.R02 2 Schuko 16A sockets mounted on the side wall of the control
cabinet.
- 06.R20 2 CEE 16A sockets mounted on the side wall of the control
cabinet.
- 06.B21 robot connection according to Euromap 67
- 06.D10 charging E661673 zone temperature set from the level of the
control system
4. 06.K40 Quality table
5. 06.K01 Graphic functions of actual and set values
6. 06.K20 Statistical Control of the SPC Injection Process
7. 06.K40 QUALITY TABLE function and TREND function
8. 06.W32 Control system in Polish/German or English
seller offer
No. resale P230628076
|