子类目
(三级类目)
生产厂家:
(品类: 206)
press capacity:950 kNcontrol:Siemens S7 Required air-pressure:6 barloading area:1200 x 600 mmPressure power:1000 kNtotal power requirement:18 kWweight of the machine ca.:6200 kgdimensions of the machine ca.:2600 x 1300 x 3100 mm ... 更多信息
Description: BIESSE COMIL CF 2000 Clamping Press Machine Working length: 2500mm Working width: 600mm Working hight: 1200mm Max throughfeed width: 720mm Feeding speed: 7,5-37,5m/min Adjustable time for the horizontal pistons: 6,85m/min Working air pressure: 6-8 bar Consumption per working cykle: 115dm3 Power 400 volt, 50 Hz, 3 phaseserial number: 55,969, Approx. Onsite Dimension. (l x w x h): 7,050 x 720 x 2,600 mm, weight approx.: 2,900 kg
Description: Heavy series pellet mill, 380 volt power supply, 100 kg hourly productionApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 100 kg ... 更多信息
Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, no more than: ...
Description: Joos electro-hydraulic veneer press with gold anodized plates Brand: Joos Type: EU80 Year of construction: 2010 M-No.: 1948289 Net working dimensions: 3,100 x 1,300 x 350 mm Press type: fine press - heated Adjustment: Electric-hydraulic, with incline press protection Control: Electric-relay controlled Automatic steering via proximity switches Electronic pressure monitoring Stepless pressure setting with constant pressure monitoring Timer: Automatic press opening end of press cycle Technical data: Cylinders: 6 cylinders of ø80 mm Pressure total: 70 tons/700 kN Pressure: Max.2.0 daN (kg)/cm2, distributed over 6 cylinders total 700 kN Weight: approx. 4,000 kg Control: manual , Pressure: analog Time: analog Indicator lights Emergency stop circuit: Safety cord over entire operator side Approx. Onsite Dimension. (l x w x h): 3,300 x 1,350 x 2,400 mm, weight approx.: 4,000 kg
Description: ORMA SPAZZ SUP INF Hydraulic Press with feeder Cleaning Brushing Top and Bottom working 1300 mm dimension (l x w x h) approx. (3 packs) 4340x1990x3400 mm 1050 x 560 x 1550 mm 3750 x 1300 x 1750 mmApprox. Onsite Dimension. (l x w x h): 4,340 x 1,990 x 3,400 mm, weight approx.: 12,000 kg ... 更多信息
Description: Veneer press ITALPRESS MEC4S (273 x 127 x 179 cm) (opening dimension 300 mm), Press area 1110 x 2200mm stored for approx. 2 years! WITHOUT checking for completeness and functionApprox. Onsite Dimension. (l x w x h): 2,730 x 1,270 x 1,790 mm, weight approx.: 2,500 kg ... 更多信息
Description: Hydraulic Frame PressApprox. Onsite Dimension. (l x w x h): 4,270 x 1,700 x 2,900 mm, weight approx.: 2,000 kg ... 更多信息
Description: Productivity 400/500 kg/h Pump motor 18.5 kW Briquette diameter 70 mm Operating pressure 200 bar Hopper capacity of 9.4 m3 (diameter 2000 mm - height 3000 mm) Refrigeratorserial number: 0956, briquet diameter: 70 mm, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 2,000 kg
Description: OCMAC Carcase PressApprox. Onsite Dimension. (l x w x h): 5,900 x 1,010 x 2,620 mm, weight approx.: 1,000 kg ... 更多信息
Description: Cabinet dimensions: Cabinet length- 300 - 2600 mm Cabinet height- 300 - 1350 mm Carcase width- 220 - 700 mm Pressing force: Horizontal- 1800 kg Vertical- 2300 kg Pressing elements: Vertical 7 pieces 150 x 50 mm Horizontal 6 pieces 150 x 50 mm Connection: 400 V 3 KWApprox. Onsite Dimension. (l x w x h): 3,800 x 1,000 x 2,400 mm, weight approx.: 2,200 kg
Description: Loader belt dimensions 1920 X 3200 mm , Integral loader dimensions: 2200 x 4400 x 1000 mm  , Unloading roller conveyor dimensions:  ,1900x 2500 x 1000 mm  , Pressing table dimensions: 1900 x 3500 mm  , Equipped with No. 6 pressing plungers DIAM: 150 mm approx  ,Approx. Onsite Dimension. (l x w x h): 9,500 x 3,000 x 2,100 mm, weight approx.: 6,000 kg
Description: OTT veneer stack press with gold anodized panels Press area 2,500 mm x 1,300 mmApprox. Onsite Dimension. (l x w x h): 2.800 x 1.500 x 2.000 mm, weight approx.: 3,500 kg ... 更多信息
Description: Briquetting Machine Serial number 164 Power 7.5 kW Pump capacity 34 cm3 Tank Ø 1000 x 900 mm CE availableserial number: 164, Approx. Onsite Dimension. (l x w x h): 1,200 x 1,900 x 1,600 mm, weight approx.: 800 kg ... 更多信息
Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg ... 更多信息
Plate press, gluing press, veneer press, splicing press, heating press, molding press -Handover: in the current condition as seen -Heating plates: the middle heating plate is defective -Manufacturer: Paul Ott, veneer press heatable type JU 80 -Drive: hydraulic -Heating capacity: 24 kW -Working area: 2550 x 1350 mm - Opening height: 400 mm -Dimensions: 3325 /1540/H1850 mm
Short cycle press, short cycle press system, panel press, gluing press, veneer press, adhesive press, heating press, molding press, -Pressing area: 3810 x 1600 mm -Manufacturer: Wemhöner, heatable veneer press type VOF2-295/2 -Control: Siemens S5 -Drive: hydraulic -Number of press cylinders: 8 pieces -Pressure pressure: 295 t -Pressure: max. 60 N/cm² -Plate heating: gas burner heat exchanger via thermal oil (max. 130° degrees) -Infeed conveyor belt: 1600 x 5000 mm -Outlet roller conveyor: 1600 x 5000 mm
压力: 40 t支架宽度: 700 mm行程: 150 mm工作台面: 700x650 mmRam 区域: 670x650 mm工作台内腹泻开口: 120 mm工作台高度: 850 mm机器重量约: 4 t空间要求 约: WxDxH 2000x18000x2700 mm位移和压力关闭四柱导向机械固定停止调整批准用 手动插入工作该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理
压力: 100 t支架宽度: 625 mm行程: 150 mm工作台表面: 580x450 mmRam 区域: 580x340 mm工作台直径开口: 150 mm工作台高度: 850 mm柱塞中的针孔: 45 mm横向支架通道: 200x200 mm机器重量约: 约: 约 6.0 t空间要求约: WxDxH 约: WxDxH 约 1300x1300x2750 mm固定停止调整压力和位移连接双手操作快速操作工 台中的辊状条经批准手动插入,此广告的数据是使用 ModulMWS创建的 - 徽标科技oHG的机器管理
压力: 250 t 柱间距离: 1100 mm 行程: 400 mm 日光: 600 mm 工作台表面面积: 1000x800 mm 柱塞表面: 1000x800 mm 工作台高度: 950 mm总功率要求: 65 kW机器重量 约:25 t机器尺寸:BxTxH 0000x0000x3900mm m ... 更多信息