二手 ORMA 出售

规格： 液压热压机 工作台尺寸 mm： 3，000 x 1，300 安装蛇形工作台 最高温度：120°。 活塞数量： 6 直径 Ø 65 mm 装机容量KW： 30，5 配有中间板 透热油操作 配有电油锅�

二手热压机ORMA MOD。NPC-6/100 - 带触摸屏的新型PLC - 压盘尺寸 2500X1300 mm - 附加板 - N. 6缸 - CE规则 - 2001年 - 千瓦 2.2 - 配有手册和CE证�

符合CE标准的ORMA圆盘涂胶旋合机 I/413 型 4 辊涂胶机，配备： - 工作宽度 1300mm - 有效工作高度 100mm - 双电机，kw 0.75+0.75 - 涂布辊 D=250mm - 计量辊 D=180mm - 带自动洗刷机 光盘路线： - 有效工作尺寸 3000x1300mm - 机械变速驱动 - 带最终光电管 2007年，机器符合CE标准�

货架压力机 ORMA NPC 300 6/110 货架尺寸 3000x1300mm 液压活塞数量：6 活塞杆直径 70mm 用水加热压榨 CE认证

规格： 01 液压机 ORMA LS/R-45/13 尺寸： 4500 x 1300 mm 08 活塞 Ø 70 mm 02 带齿轮齿条柱塞的活塞 行程： 200 mm 01 装载滚筒输送机 4500 x 2200 mm 01 卸料滚筒输送机 4500 x 1300 mm （带停止） 辅料： 01 发电机 HF 功率 40 kW 01 双辊糊盒机 01 机械手大象 200 公斤 长： 4000毫�

Description: ORMA SPAZZ SUP INF Hydraulic Press with feeder Cleaning Brushing Top and Bottom working 1300 mm dimension (l x w x h) approx. (3 packs) 4340x1990x3400 mm 1050 x 560 x 1550 mm 3750 x 1300 x 1750 mm Approx. Onsite Dimension. (l x w x h): 4,340 x 1,990 x 3,400 mm, weight approx.: 12,000 kg

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Maximum panel dimensions (for 3D wrapping) 1240x2740 mm Pressing cylinders 6 pcs Piston diameter 140 mm Piston stroke 190 mm Total maximum counter pressure 200 T Pneumatic pressure at work (max) 5 Kg/cm Room height 160 mm Upper and lower flange 40 + 20 mm Part size / manual pin placement area (maximum) 1250x2550 mm Minimum foil width 1400 mm Minimum plate thickness 15 mm Working height (distance from the floor to the level of the loading tray) 930 mm Maximum temperature of the heating liquid 130°C Air tank capacity 500 liters Total installed power 50 kW Dimensions (L x W x H) 11500x2950x2550 mm Weight 12800 kg In accordance with CE standards

3 trays Table length: 3250 mm Machine is in excellent condition It has been used as spare machine in factory.