传送带 二手 出售

Transnorm modular conveyor with combiner conveyor belt GF 2500-1300-1200RA2230Merging of two belts into oneTechnical data:Conveyor length (NL): 2500 mm Frame width (NB): 1300 mm, 1600 mm with motorBelt width (GuB): 1200 mmOverall height (BH): 80 mm, 430 mm with motor at the bottom, approx. 1000 mm with motor at the topScraper height: 190 mm (without motor)Belt width/height scraper: 180 mmSupport feet: optionally availableConveyor speed (v m/s): 1Drive: SEW geared motor, R17 DT80N4Electrical data: 50Hz V380-500, kW 0.75 S1Drive pulley: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsLateral guide on one and both sidesFrequency inverter for stepless speed changeAdjustable length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 2500Nominal / ou ...

Transnorm rising falling Incline belt conveyor GF 6000-600-500RA2066Technical data:Conveyor length (NL): 6000 mm (4200 mm + 1800 mm)frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15°Supporting feet: optionally availableConveying speed (v m/s): 0,33Drive: SEW gear motor, R27 DT80N4/BMGElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 6000Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zent ...

Transnorm spiral helix belt curve conveyor left 85°-775-550 IR600 RA1658 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105Conveyor length middle radius (NL): 1703 mmframe width (NB): 775 mmbelt width (GuB): 550 mmoverall height (BH): 210 mm inner radius (IR): 600 mmConveying a ...

Transnorm spiral helix belt curve conveyor right 90°-840-650 IR600 RA1869 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105Frame width (NB): 840 mmbelt width (GuB): 650 mmheight (BH): 210 mm Inner radius (IR): 600 mmConveying angle: 90° degreesIncline: 210 mm / 90 ...

Transnorm spiral helix belt curve conveyor right 90°-750-550 IR600 RA2274 Technical data: Type designation: Belt curve conveyor TS 1600-105Conveying length middle radius (NL): 1805 mmFrame width (NB): 750 mmbelt width (GuB): 550 mmheight (BH): 210 mm Inner radius (IR): 600 mmConveying angle: 90° degreesdecline: 210 mm / 90° = 840 mm / 360°support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor SA37 DT80K4/MM05/BW1Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1Belt: double layer, green, smooth, KT36 (wear see pictures)Year of construction: 2001 Optionally available:Supports Side guide one and both sidesConversion to left for rising Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: good (used)Driven: YESRunning direction: RIGHTscope of delivery: including  ...

propulsion: 1,1 KW SEW motor without brake availability: immediatelly Installation dimension: 3200 x 1500 x 900 mm Usable width: 900 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supp ...

宽度：395 mm长度：2960 mm输出高度：130 mm有效宽度：385 mm极中心距：400 mm驱动电机：带永磁体的三相线性磁力输送机。该广� �的数据是使用模态MWS创建的 - 标识科技oHG的机器管理� ... 更多信息

不锈钢 入口高度： 400 mm 出口高度： 1，700 mm 带驱动电机 带塑料垫链 可在脚轮上驱� ... 更多信息

伸缩式输送机、卸料伸缩式输送机、伸缩式带式输送� �� - 伸缩式输送带 性能： 二手伸缩式带式输送机 状况：功能齐全，有磨损迹象 快速物料输送的理想选择 专业拆卸和包装 建造年份：2003年 颜色： 灰色 伸缩式带式输送机 缩回总长度：约 5,080 mm 延伸总长度：约 11,650 mm 包括控制柜在内的总宽度：约 1,250 mm 不含控制柜的总宽度：约 930 mm 皮带宽度： 约 600 毫米 表带类型：光滑 包括脚 包括控制柜 1 件现货 每件价�

性能： 状况：功能齐全，有磨损迹象 快速物料输送的理想选择 专业拆卸和包装 建造年份： 04/ 04 制造商： 传讯技术有限公司 条件：二手 型号/型号： 80/ 600 总长度： 约 880 毫米 包括电机在内的总宽度：约 700 mm 不含电机的总宽度： 约 650 mm 皮带宽度： 约 595 毫米 表带类型：光滑 颜色：灰色/黑色 材料：不锈钢/铝 框架高度： 约 100 毫米 发动机类型：电动滚筒 得益于带式输送机的出色工艺，即使在高负载下，您� ��物料也能平稳地滑向目的地。 为您的内部物流量身定制的解决方案 对于滚筒输送机、皮带输送机、倾斜输送机或用于装� ��货物的望远镜，我们是您称职的合作伙伴！我们很� �意为您提供个性化的报价或就概念或安装问题为您提 供建议。只需让 ...

带齿轮电机的传送带，宽度900mm，长度11米  ... 更多信息

驱动滚筒 （未使用） 皮带宽度： 2000 毫米 轧辊长度： 2200 毫米， Ø 830 毫米 包括：轴承和橡胶涂层  ... 更多信息

制造商： 泰克诺维布拉齐奥尼 - 建设年份：2006年 - 型号：28482 - 尺寸：2100x900x2900mm - 表带宽度： 200 mm - 录音尺寸：700x700mm - 输出尺寸：200x130mm - 运输速度：6.0米/分钟 - 电气数据：400V;0.18 瓦;0.7安� ... 更多信息

吸料输送带;状态大修;长度2000毫米;工作宽度350mm;速度 可调;向前或向后运行;新转换器;新传送带;展位介绍。 BVM吸料输送机;条件重建;长度2000毫米;工作宽度 350mm;速度可调;正向操作或反向操作;新型变频器;新皮� ��;站在一台机器上�

性能 制造商二手带式输送机 颜色： 银色 脚单独订购 包括缝纫电机 包括侧面指南 材料： 钢 快速物料输送的理想选择 专业拆卸和包装 条件： 功能齐全 1 件库存 带式输送机 织带非常适合在拣选区联锁机器或工作站并优化内部� ��程。在运输过程中，带式输送机可以将敏感且不同� �寸的容器、箱子或其他包装和物品单元输送到进料或 交付点，并且还可以作为生产机器前方或之间的连接� ��分。此外，它还能够在操作和存储中实现高效的零� �运输，并用于输送相当大的流速和距离。 规格： 带式输送机的尺寸 总长度：1.820毫米 总宽度：970mm 有关皮带的信息 皮带宽度：500mm 腰带：伦克的凹�

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good conditionFeatures: Construction year: 2007condition: very good (used)Conveying length in mm: 5549 + 9 ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): 610mm Belt width (GB): 500 mm Webbing: slightly structured Length pre-flow belt: 900 mm Length of sheet: 613 mm Webbing: smooth Heights OK Strap: H 1 bottom + 650 mm H 2 top 2,300 mm Height differenc ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good conditionFeatures: Construction ye ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good conditionFeatures: Construction y ...

Data sheet of retrofit POS. GE 11.85 Gebhardt 6.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 6.529 mm (incl. upper bow piece) Upper bow piece length: 613 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable State: functionally and visually good conditionFeatures: Construction year: 2007condition: very good (used)Conveying length in mm: ...