二手 KANNEGIESSER 出售

夹板： 850 x 1250 mm - 通过T型槽紧固工具 鞋面行程 夹板：最大 400 mm 开口宽度：最大 800 mm 工具安装高度：最小 400 mm 工作台高度： 1080 mm 锁模力： 400 kN 张开力： 480 kN 光束角度：85 上板 倾斜范围 机架：从0到90，液压 板旋转范围：从-90到+90，手动 行程油缸：1个派克行程油缸 力元件：2 个带夹爪的动力元件，安装在前部 模具重量以上：最大约400公斤 模具总重量：最大约 1000 公斤 阀门控制：用于行走油缸和动力元件的黑色/白色阀门 磁芯拉力控制：无磁芯拉力 液压动力装置：H-L 55/22 - 最大工作压力 250 bar 控制：无控制 尺寸： 模架：约 1,600 x 1,400 x 2,000 mm（宽 x 深 x 高） 重量：约2,600公�

Kannegiesser 寺庙压领和翻领压机 XKK-B DPF Kannegiesser 熨烫压力机衣领和翻领压力机型号XKK-B DPF 在一次操作中加工衣领和袖口 尺寸：深度130厘米x宽114厘米x高145厘米 建设年份 11/1998 重量 390 Kg 工作压力 8 巴 耗气量约 100 Kg 蒸汽压力 16 巴 与控制康耐基瑟IBT-Net 设备运行完美无�

Kannegiesser GF600/5000 带式输送机 5 m Kannegiesser 带式输送机状况非常好。 带式输送机配有带变频器的电机，用于调节输送速度� �� 该带式输送机专为需要强力驱动的应用而设计 带式输送机 GF600/5000 皮带宽度： 600 mm 总宽度： 680 mm 皮带长度： 5000 mm 带弯带长度： 5500 mm 连接电压： 400 V 英特诺电动滚筒 艾默生变频器 建设年份： 01/2013 输送速度（v m/s）：可通过变频器上下调节 更多新品和二手商品 - 可以在我们的商店找到！ 根据要求提供国际运费�

卡内基瑟 75 厘米 带式输送机 5 m Kannegiesser带式输送机状况非常好。 带式输送机有一个电机，带有用于调节输送速度的变� ��器。 所示的支撑也可以用作站立使用的支撑脚。 该带式输送机专为需要强大驱动力的应用而设计 皮带宽度： 750 mm 皮带长度： 5000 mm 包括支撑脚 连接电压：400V 发动机 输送速度（v m/s）：带变频器上下可调 更多商品 - 新的和二手的 - 可以在我们的商店中找到！ 国际运费可应要求提供�

卡内基瑟 对角输送带 75 厘米 带式输送机 4 m Kannegiesser带式输送机状况非常好。 带式输送机有一个电机，带有变频器来调节输送速度� �� 所示的支撑也可以用作站立使用的支撑腿。 该带式输送机专为需要强大驱动力的应用而设计 表带宽度： 750 mm 皮带长度： 4000 mm 包括支撑腿 连接电压：400V 发动机 输送速度（v m/s）：带变频器向上和向下可调 更多商品 - 新的和二手的 - 可以在我们的商店中找到！ 国际运费可应要求提供�

卡内基瑟 对角输送带 75 厘米 带式输送机 5 m Kannegiesser带式输送机状况非常好。 带式输送机有一个电机，带有变频器来调节输送速度� �� 所示的支撑也可以用作站立使用的支撑腿。 该带式输送机专为需要强大驱动力的应用而设计 表带宽度： 750 mm 皮带长度： 5000 mm 包括支撑腿 连接电压：400V 发动机 输送速度（v m/s）：带变频器向上和向下可调 更多商品 - 新的和二手的 - 可以在我们的商店中找到！ 国际运费可应要求提供�

凯内基瑟滚筒曲线输送机 90 滚筒输送机 60 厘米 Kannegiesser滚筒曲线输送机状况非常好。 滚筒输送机有一个电机，带有变频器来调节输送速度� �� 所示的支撑支撑也可以用作站立使用的支撑脚。 滚筒曲线输送机 90 卷宽： 600 mm 总宽度： 680 mm 包括支撑脚 H = 635 mm +/- 50 mm 可调 连接电压：400V 发动机 输送速度（v m/s）：带变频器向上和向下可调 更多商品 - 新的和二手的 - 可以在我们的商店中找到！ 国际运费可应要求提供�

Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg

Telescopic belt conveyor Kannegiesser 4750+800-885-750 RA1957 Base part with one pneumatically retractable and extendable telescopic elements. The telescope can be extended up to 5550 mm Length base part: 4750 mm Width base part: 885 mm Height base part: 270 mm, ftontpart: 400 mm Extension: 800 mm Total length: up to 5550 mm Band width: 750 mm Belt speed: adjustable via frequency converter Nominal voltage: 3 x 400 VAC + PE Frequency: 50 Hz Nominal consumption: 0.75 kW Special feature / accessories: 2x light barrier 1x Pneumatic maintenance unit 1x Pneumatic Valve 1x Pneumatic cylinder Optionall available: Supports Side guides one and both sides All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 4750+800 Nominal / outside width in mm: 885 Belt width in mm: 750 Driven: ...

Kannegiesser belt curve conveyor left 90°-880-700-IR400 RA1924 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 880 mm belt width (GuB): 700 mm height (BH): 170 mm Adjusted height: 760 mm Inner radius (IR): 400 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,217m/s Drive: Siemens gear motor Electrical data: 50Hz V400, kW 0.37 / S1 Belt: new Year of construction: 2018 including Side guides on both sides Prices net plus VAT from central warehouse Dr ...

Belt conveyors GF 2250-680/600 with 2 x 90° pushers (from slides) Make: Kannegiesser like new, showroom machine Year 2014 Length: 2.250 mm Belt width: 600 mm Total width: 680 mm incl. 2 piece pneumatic 90° off valves Wxh = 550 x 320 mm incl. 2 PCs. supports, height OK belt + 1000 mm Features: Construction year: 2014 condition: as good as new (used) Conveying length in mm: 2250 Nominal / outside width in mm: 680 Belt width in mm: 600 Driven: YES scope of delivery: including supports without side guides, including 2 pneumatic 90 ° pushers / pushers 550 x 320 mm (WxH) Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & ...

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Kannegiesser belt conveyor belt conveyor with DUO-Pusher GF 2500-680-600 RA1309 The Kennegisser belt conveyor is from 2015 and in good (used) condition. In addition, it is 2500 mm longer and equipped with a DUO pusher (sorting pusher). The pusher is used to sort laundry items according to selected criteria. The folded laundry item is pushed by a pusher plate onto a following conveyor or a roller conveyor. 2 support feet are included in delivery. Technical data: Conveying length (NL): 2500 mm Framework width (NB): approx. 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 850 mm +/- 90 mm Number of support feet: 2 pieces Conveying speed (v m/s): 0.1 - 1.1 m/s, reversing operation with FU Drive: Normal Motor Electrical data: 400 V / 50 Hz Deflection drum (UT): Ø = 60 mm belt return roller: Ø = 50 mm Belt: 2-layer PVC belt, black, smooth Year of construction: 10/2015 Special featur ...

Kannegiesser belt conveyor belt conveyor GF 1500-1130-1050 RA1979 Technical data: Conveying length (NL): 1500 mm Framework width (NB): approx. 1130 mm belt width (GuB): 1050 mm Height / Belt run (BH): 420 mm +/- 100 mm Number of support feet: 2 pieces Load (kg/rm): 75 kg Conveying speed (v m/s): 0,33 m/s Electrical data: 400 V / 50 Hz / 0,75 kW Year of construction: 06/2019 All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: good (used) Conveying length in mm: 1000 Nominal / outside width in mm: 1130 Belt width in mm: 1050 Driven: YES Engine type: Trommelmotor KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including supports and side guides For individual, professional advice, simply contact us. Simply contact us by phone or email. We are happy to help you plan and implement your ...

Kannegiesser belt conveyor inclined conveyor belt GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum (UT):  ...