传送带 二手 出售

Transnorm belt conveyor belt conveyor 1252-600-500 gate passageRA2049The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option.Technical data:Manufacturer: TransnormYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 1251 mmnominal/outer width (NB): 600 mm 735 with baringsbelt width (GB): 500 mmoverall height (BH): 85 mmmotor height (MH): 110 mmMotor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50HzConveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask)Optional:Supports with dempersSideguidesFrequency converterWe can also extend the conveyor to your needed dimensionPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFe ...

Transnorm belt conveyor 1200-600-500RA1987Technical data:Manufacturer: TransnormType: TS 1100 belt conveyorYear of manufacture: 1999Condition: good (used)Motor: fully functionalconveying length (FL): 1200 mmnominal/outer width (NB): 600 mmbelt width (GB): 500 mmoverall height (BH): 80 mmmotor height (MH): 545 mmMotor type: SEW-EurodriveMotor power: kW 0.55 230/400 V 50HzConveying speed: 1,6 m/sWeight: 60 kg Optionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 1999condition: good (used)Conveying length in mm: 1200Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW EurodriveKW: 0,55/S1Conveyor speed m / s: 1,6scope of delivery: without supports and sid ...

性能： 状况：功能齐全，有磨损迹象 快速物料输送的理想选择 专业拆卸和包装 建造年份：8/99 制造商： 传讯技术有限公司 条件：二手 型号/型号： 110/ 600 总长度： 约 1020 毫米 包括电机在内的总宽度： 约 780 mm 不含电机的总宽度： 约 680 mm 皮带宽度： 约 600 毫米 表带类型：光滑 颜色：灰色/绿色 材料：不锈钢/铝 框架高度： 约 130 毫米 发动机类型：电动滚筒 得益于带式输送机的出色工艺，即使在高负载下，您� ��物料也能平稳地滑向目的地。 为您的内部物流量身定制的解决方案 对于滚筒输送机、皮带输送机、倾斜输送机或用于装� ��货物的望远镜，我们是您称职的合作伙伴！我们很� �意为您提供个性化的报价或就概念或安装问题为您提 供建议。只� ...

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105Frame width (NB): 775 mmbelt width (GuB): 600 mmheight (BH): 210 mm Inner radius (IR): 500 mmConveying angle: 180° degreessupport feet: opt ...

curved belt conveyor curved belt 109° right Transnorm TS1500-100 second-hand machine Technical details: Manufacturer: Transnorm Type: curved belt 109° right TS 1500-100 belt bend conveyors Year of construction: 1999 Angle: 109° Direction: Right Nominal radius RN: 600 mm BN width: 600 mm Speed: v = 1.0 m/s Strap type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Please ask without support, if necessary. Price D-97076 Würzburg from central warehouse Transport dimensions: Lxwxh = 2.4 x 1.10 x 0.40 m Weight: 150 kgFeatures: condition: good (used)Nominal / inner radius in mm: 600Nominal / outside width in mm: 670Belt width in mm: 600angle: 109°Driven: YESRunning direction: RIGHTEngine type: SEW EurodriveConveyor speed m / s: 1,0scope of delivery: without supports and side guidesFür eine individuelle, fachmännische Beratung setzten Sie  ...

Transnorm curved belt conveyor right bend 125°-775-600 IR600 RA2012 Technical details:Manufacturer: TransnormType: Belt Curve 125° rightTS 1500-100 Curved belt conveyorYear of manufacture: 2001Angle: 125°Running direction: rightinner radius (IR): 600 mmbelt width (GB): 600 mmSpeed: please contact, motor not yet mountedBelt type: smooth, KT36 Drive location: outside pulling Condition: good condition / fully functional Scope of delivery: without supports & sideguide (please inquire if required)Optional: supports & sidequides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: condition: good (used)Nominal / inner radius in mm: 600Nominal / outside width in mm: 670Belt width in mm: 600angle: 109°Driven: YESRunning direction: RIGHTEngine type: SEW EurodriveConveyor speed m / s: 1,0scope of delivery: without supports and side guidesFür eine individuel ...

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105frame width (NB): 775 mmbelt width (GuB): 600 mmoverall height (BH): 210 mm inner radius (IR): 600 mmConveying angle: 90° degrees (coiled 191mm rising)Inc ...

性能： 二手伸缩式皮带输送机 条件：功能齐全，有使用痕迹 快速物料运输的理想选择 专业拆卸和包装 颜色： 蓝色 包括支脚 包括控制柜 2 件 现货 每件价格 伸缩式带式输送机 伸缩式皮带输送机非常适合拣选区，用于联锁机器或� ��作站并优化内部流程。在运输过程中，伸缩式皮带� �送机可以将敏感且不同尺寸的容器、箱子或其他包装 和物品单元输送到进料或交付点，并且还可以作为生� ��机器前方或之间的连接路线。此外，它还能够在操� �和存储中实现高效的零件运输，并用于输送相当大的 流速和距离。 规格： 缩回总长度：5.080毫米 延伸总长度：11.650mm 包括控制柜在内的总宽度：1.250mm 无控制柜总宽度：930mm 皮带宽度：600mm 皮带类型：光滑 为� ...

Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data:Frame width (NB): 730 mmbelt width (GuB): 550 mmheight (BH): 210 mm Inner radius (IR): 600 mmConveying angle: 70° degreessupport feet: optionally availableConveying speed (v m/s): freely adjustable with frequency converter between ...

驱动和偏转滚筒 不同直径和长度  ... 更多信息

哈尔登班德 21 m 输送带宽度 650 mm 槽 制造商：波尔克斯迈尔 框架由方管制成 AA= 21 m 驱动 2.2 KW 萨克森–安哈特州仓库 农场价格，免费装载  ... 更多信息

性能： Cjt9y9ndu0 条件：功能齐全，有使用痕迹 颜色： 橙色 材料：钢 快速物料输送的理想选择 专业拆卸和包装 规格： 带式输送机的尺寸 总延伸长度： 9820 mm 缩回总长度： 4350 mm 输送长度： 9400 mm 包括控制柜在内的总宽度： 1600 mm 不含控制柜的总宽度： 1200 mm 输送宽度/皮带宽度： 785 mm 表带类型：光滑 含电机高度：260mm 净重：5000公斤 输送高度（含英尺）： 820 mm 驱动：电机 包括电机 包括控制柜 伸缩式带式输送机 由于伸缩式带式输送机的出色工艺，即使在高负载下� ��您的材料也能平稳地滑向目的地。 为您的内部物流量身定制的解决方案 对于滚筒输送机、皮带输送机、倾斜输送机或用于装� ��货物的望远镜，我们是您称职的合作伙伴！我们 ...

Lippert Belt Conveyor Riser with Arch and Straight GF 7000-650-500 RA1368 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7.000 mm (riser 4080mm + bow 500mm + upper straight 2420mm) Frame width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm Support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converterDrive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Drive drum: Ø = 64 mmDeflection r ...

Transnorm conveyor belt GF 12330-600-500RA2072Technical data:Conveyor length (NL): 12330 mm frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,25Drive: SEW gear motor R27 DT80N4Electrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 12330Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,75/S1Conveyor speed m / s: 0,25scope of delivery: with ...

Transnorm conveyor belt GF 3800-700-600RA2182Technical data:Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,5Drive: SEW gear motor, SA37/T DT71D4/THElectrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 3800Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,37/S1Conveyor speed m / s: 0,5scope of delivery: wi ...

Transnorm conveyor belt GF 4700-600-500RA2120Technical data:Conveyor length (NL): 4700 mmframe width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motor R27 DT80N4/BMGElectrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 4700Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit Spannstati ...

Transnorm conveyor belt GF 6585-600-500RA2077Technical data:Conveyor length (NL): 6585 mm frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motor, R32DT71D4Electrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 6585Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationK ...

Transnorm conveyor belt GF 6600-600-500RA2137Technical data:Conveyor length (NL): 6600 mm frame width (NB): 600 mm, 700 mm with motorbelt width (GuB): 500 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed.Drive: SEW gear motor, R32DT71D4Electrical data: 50Hz V380-500, kW 0,37 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 6600Nominal / outside width in mm: 600Belt width in mm: 500Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationK ...

Transnorm conveyor belt GF 7200-900-800RA2216Technical data:Conveyor length (NL): 7200 mm frame width (NB): 900 mm, 1000 mm with motorbelt width (GuB): 800 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): please contactDrive: SEW gear motorElectrical data: 50Hz V380-500Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 7200Nominal / outside width in mm: 900Belt width in mm: 800Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit Spannstationscope of delivery: without supports and side guidesFor individual, professi ...

Transnorm conveyor belt GF 29750-900-800RA2215Technical data:Conveyor length (NL): 29750 mm frame width (NB): 900 mm, 1000 mm with motorbelt width (GuB): 800 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): contact usDrive: SEW gear motor, SA47/T DT80 N4Electrical data: 50Hz V380-500, kW 0,75 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2001condition: good (used)Conveying length in mm: 29750Nominal / outside width in mm: 900Belt width in mm: 800Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 0,75/S1Conveyor speed m / s: bitte Kontaktie ...