生产厂家:
(品类: 704)
Friesuse Kiremko BV from French fries Production, Completely built of stainless steel, Fully automatic deep fryer oven, With integrated heat exchanger, Is heated with Thermooel Indirectly, L: 8500 mm. -Kiremko Kiremko BV Fryer, Completely built in stainless steel, Fully automatic fryer continuous furnace, with an integrated heat exchanger, Is with Thermo-oil indirectly heated, L: 8500 mm
曼齐尼双涡轮制浆/精炼机 型号: TEF20.E 年份: 2000 外形尺寸:长2,900毫米,宽1,700毫米,高2,400毫 ... 更多信息
For cutting of cabbage, lettuce, leafy vegetable, etc. High capacity Incl. a 4-person trimming line in front of the cutter this extra information is standard for this model. Please always double-check the details during a visit The Eillert G 4400 VS Vegetable Cutting Machine, introduced in 2000, revolutionized food processing with its multifunctionality and efficiency. Equipped with advanced cutting mechanisms, the G 4400 VS precisely slices vegetables The machines versatility is further enhanced by its adjustable settings, allowing operators to tailor processing parameters according to specific requirements. Its user-friendly interface and automated controls simplify operation, reducing the need for extensive training and minimizing human error.
for removing the stone from fruits,, equipped with pitting insert for cherries - plate hole diameter 26-14,, The machine has 40 stone removal plates, each with 77 holes., These holes are conical and have an upper diameter of 26 mm and a lower diameter of 14 mm,, The machine is equipped with the following engines:, Main drive: 2.20 kW 1,500 rpm, Brush drive: 0.37 kW 3,000 rpm, Vibrator drive: 0.75 kW 1,500 rpm, The speed of the machine is infinitely adjustable via a hand wheel., Output: 12 - 80 / minute - depending on the type of fruit and the ripeness of the fruit, power: 12 - 80 / minute - depending on the type and ripeness of the fruit, Dimensions / weight: 1.6 tons
The Urschel Model GK slicer allows you to cut ripe, soft fruit and crispy root vegetables in a variety of ways. These include classic even cubes, stripes, posts and straight and wavy patches, and even three-dimensional shapes with four wavy and two flat surfaces. The device is especially recommended for cutting wavy potato fries. Due to the direct contact with the food product, the equipment is equipped with high-quality parts made of stainless steel. The notch works smoothly, does not jam, offering an uninterrupted work cycle. Experienced Urschel specialists have made sure that the device is easy not only to use, but also to clean and maintain. Equally important, buyers of this ice maker get a wide range of interchangeable cutting parts. Thanks to this, it is possible to obtain delicate, clean cuts in a large range of sizes. Additionally, the machine can be equipped with any cutti ...
品牌:CFT 型号:TE系列 制造年份:2002 生产能力:每小时15吨 该系列旨在提高其前身 MANZINI TE 已经卓越的性能。第15段和第30条。在保留其截断锥形 筛网的重要特性的同时,这种新设计允许快速转换( 需移除桨叶),因为锥形筛的窄端位于装置的前部 盖子下方。 涡轮提取器系列具有一个独特的特性:由于产品内滞 的空气而导致产品乳化。事实上,产品的进料位于 个完全封闭的盖子上,桨叶对锥形壁的离心作用在产 品流动方向上产生冲击效应,有助于将果渣输送到排 通道。 涡轮萃取器专门设计用于提取和精炼经英寸热破碎/冷 破碎技术处理的番茄和果汁,以及其他需要将液体与 体分离的流体产品。产品被送入涡轮提取器,转子 过径向安装的桨叶 ...
Suitable for cutting fruit and vegetables, speed: 400-600 cycle/h, compressed air supply: 6-8bar. ... 更多信息
Hepro brand carrot peeling machine - the equivalent of Sormac KP Little used ... 更多信息
Can seaming machine, semi-automatic, make Lanico, type V110 PH, year 2004 Ü, Can seaming machine, working semi-automatically,, Version: stainless steel,, was in use for beverage cans,, Processing range:, Diameter: from 42 to 163 mm, Height: from 26 to 300 mm, The machine was only driven in one shift and is in good technical condition, with pneumatic clamping and height adjustment., With storage - dispenser for the lid to be folded (56 mm), With 4 format sets for plastic cans with a metal closure with a diameter of 46, 50, 52 and 56 mm, power: up to 850 closures / hour
秤输出:高达 140 次/分钟,, 称量范围:高达 2,500 g / 取决于液滴次数,, 体积范围:每滴 1,500 ml,, 称重系统:2 光束 DMS 系统,, 分辨率:高达 0.1 g.,无控制 ... 更多信息
no. 4 FERRARA brand artichoke turning machines mod. DVRP 14 M year 2004 in perfect condition complete with raised base, hopper with loading belt, leaves evacuation belt, end of line with selection belt and stainless steel ducts ... 更多信息
Disc grinding mill, to break the fruit into small pieces and allow easy release of the oil. power 25hp ... 更多信息
Calibrator for washing and calibrating fruits and vegetables. The calibrator was used to calibrate tangerines, and it has a computer program for various forms of fruit and vegetables and registers weight and classification of weight by size. It has 7 outputs per desired caliber output. The calibrator has a belt for manual product separation, washing, drying, waxing, hot drying, and calibration. The calibrator is from an Italian machine manufacturer. It has conveyor belts for automatic stuffing in crates.
通用食品加工机 索利亚M3演进 类型: M3 点滴 规格: 400 伏 / 50 赫兹 / 0.7 千瓦 / 1.7 安 / 100/200 转/分 建设年份: 2004 占地面积基本单元: 高度: 53 x 宽度: 35 x 深度: 50 厘米 供货范围:基本单元 + 带压力翻板和推杆的切割单元 + 锉刀盘 配件,看原图! 功能经过测试/机器可立即使用! 注意: 基本单元的功能可以通过购买各种附件来扩展。 例如,以后可以购买用于绞肉机,条形切割机,立方 切割机,牛排机,行星搅拌器和揉捏桶10L以及许多 同的蔬菜切割盘的附件。 条件见原始图片 ! 如果您有任何疑问,请发送电子邮件或致电
Advantages of Urschel OV: high performance, adjustable thickness of slices, power 2.2 kW, easy to clean and maintain, solid construction made of stainless steel, Stability safety and functionality. Examples of products that are suitable for slicing Urschel OV: Parsley Celery Carrots Cucumber Courgette Pepper Potato
Vegetable cutting and washing line Line composed of: Product elevator using plastic belt with buckets Dimensions: 2740 x 200mm useful Brand: T.PACK S.L Model: EV-2740X200 Year 2005 Cutter, slicer and dicer for vegetables (potatoes in its last application) with a continuous work system for uninterrupted production. three-dimensional cuts that have four wavy surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140mm) in any dimension. Makes smooth or wavy dice or strip cuts, three-dimensional cuts that have four wavy surfaces, and smooth cuts of a wide variety of fruits and vegetables. Slices: 1/16 – 3/4 (1.6 – 19.1 mm) Dicing: A combination of the slicing blade, cross blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjust ...
Vegetable cutting and washing line consisting of: Product elevator by means of plastic belt with buckets. Dimensions: 2740 x 200mm useful Model: EV-2740X200 Cutting, slicing and dicing machine for vegetables (potatoes in its last application) with continuous working system for uninterrupted production. Three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Accepts a maximum product feed of up to 5.5 (140 mm) in any dimension. Cuts cubes or smooth or corrugated strips, three-dimensional cuts that have four corrugated surfaces and smooth cuts of a variety of fruits and vegetables. Slices: 1/16 - 3/4 (1.6 - 19.1 mm) Cubing: A combination of the slicing blade, crosscutting blade arbor and circular blade arbor is used for dicing. Changing the size of the cubes is done by using the necessary cutting spindles and adjustin ...
包装系统, 制造 Meypack, 型 VP452, 制造年份 2006, 包装类型: 托盘, 托盘/盖, 最大产量: 30 包/分钟, 机器数据: , 入口高度: 1,150 mm, 出口高度: 650 mm, 可能的多件装尺寸:, 长 x 宽 x 高: 200-400mm x 120-300mm x 80-350mm, 切割尺寸: 长 x 宽: 360 – 1,400 mm x 300 – 700 mm,带诺信热熔胶装置, ProBlue P/N213 544C
自动旋转关闭站。, 驱动: 1.5 kW, 通过真空泵产生真空,带闭合分选,带 TO 53、TO 66、TO 82 装置,用于直径约为 60、64、70、78、90 和 102 mm(65 毫升、125 毫升、275 毫升和 1,062 毫升玻璃杯)的玻璃片,产量:每小时最多 1,200 杯