斯蒂芬通用揉合器/搅拌机 型号: VM150 1997年 整体尺寸:宽度150厘米,长度100厘米,高度150厘米 功率:2.5千瓦 每分钟革命: 1,400 混合碗尺寸:直径65厘米,高度50厘
万能机 品牌 : Stephan 型号: UMC 12 F 容量:12升 技术参数 : 碗容量 12 升,批次容量 2-7 升, 站在不锈钢桌子上 碗不锈钢,盖子不锈钢 高达 3000 rpm。 频率控制 防真空 用于冷却/加热的双层夹套 手动墙面剥离 适用于混合、粉碎、乳化 非常好,功能齐全。
斯蒂芬 UMHC403E-GNI 飞行员万能机械 带控制柜 双层夹克 蒸汽喷射喷嘴 刀插入物 带耐压开合的盖子 供料容器 蒸汽中转站 锅炉上的出口 电动搅拌叶片 3 种速度 机器可倾斜 盖子上的安全装置不起作用,机器在盖子打开的情况 运行 控制柜后部流量计的视镜有缺陷 机器应重新喷漆和大修 电压 400V 保险丝: 32A 在任何情况下,机器在使用前都必须彻底清洁 有关测试运行的视频和更多图
斯蒂芬 UM44-S 万能机 三种速度(700/1450/2900rpm) 脉冲开关 带混合刀片 -可倾斜以去除加工介质 -整齐状况,使用前仍应彻底清洁 有关测试运行的视频和更多可用图
Stephan MCH10/2 Microcut,连续切割机,胶体磨,coial磨,超细撕碎机 机器整洁 电压:400V 功率:4000/4500W 转速:1415/2920rpm 运行整齐平稳 机器在使用前必须彻底清洁 切割间隙:1.3mm 该机器由前任所有者在线”操作,因此没有循环装置 但可以使用DN50牛奶螺纹螺钉轻松构建。 有关测试运行的视频可
斯蒂芬UM44万能机 两种转速 1440/2890rpm 终止开关 带刀插件 -可倾斜以去除加工介质 -发动机制动器功率和时间可调 -整齐状况,使用前仍应彻底清洁 提供有关测试运行的视频可
斯蒂芬UMB25通用机器使用 两种速度 包括刀插入物 机器可倾斜以去除处理过的介质 碗由不锈钢制成,容积 25 升,最多可容纳 18 升批次 机器状况非常好,但在使用前仍必须彻底清洁。 运行整齐平稳 Viedo可通过试运行获
斯蒂芬MCV12 微切、连续切割机、胶体磨、考亚尔磨、超细撕碎机 电压:400V 转速:2900转/分 功率:8800W 不锈钢漏斗 带DN50奶线的喷嘴,因此可以改装用于产品循环的循环 装置 整洁状态 运行平稳 使用前应彻底清洁 提供有关测试运行的视频可
斯蒂芬 UM44-S 万能机 双速 1410/2820rpm 脉冲开关 带刀插件 UM44-S 是通过从以前的所有者那里移除横向驱动器而制成的 UM44,开口用不锈钢板封闭 -可倾斜以去除加工介质 -整齐状况,使用前仍应彻底清洁 有关测试运行的视频和更多图片可
斯蒂芬UMB40万能机 两种速度 1420/2870 rpm 刀具的使用以及额外的工作 机器可倾斜以去除处理过的介质 不锈钢碗 动力杆和发动机盖应重新喷
Stephan UM44 万能机 两种转速 1450/2900rpm 脉冲按钮 带刀片 -可倾斜,用于去除处理后的介质 -状况良好,使用前仍应彻底清洁 有关测试运行的视频可
斯蒂芬UM25万能机 两种速度 1440/2900 rpm 刀片(刀片要磨尖) 带双夹套的不锈钢锅炉(电加热,但没有功能) 机器可倾斜以去除处理过的介质 机器状况非常好 提供有关测试运行的视频可
斯蒂芬UMB25通用机器使用 两种速度 包括刀插入物 机器可倾斜以去除处理过的介质 碗由不锈钢制成,容积 25 升,最多可容纳 18 升批次 机器在使用前必须彻底清洁。 车架和发动机盖应该有新的油漆 运行整齐平稳 Viedo可通过试运行获
斯蒂芬UM12万能机 两种转速:1420/2810rpm 不锈钢锅炉,带双夹套和温度传感器插座,可拆卸 不锈钢盖,带视镜和真空连接 压力计 机器状况良好,运行整洁安静 使用前应彻底清洁 提供有关测试运行的视频可
斯蒂芬 MCV10 微切,连续切割机,胶体磨,考亚尔磨,乳化机 电压:400V 转速:2850转/分 不锈钢漏斗 机器严重脏污,外壳上有锈迹 不带铭牌 运行声音很大,因为轴承损坏,因此作为备件捐赠者 业余爱好者对象出售 提供有关测试运行的视频可用
斯蒂芬 UM25 通用机床 三速 720/1430/2880 rpm 混合插入钝 带双层夹套的不锈钢锅炉 机器可倾斜,用于去除加工后的介质 机器状况良好 提供有关测试运行的视频和其他图
万能机 制造商: Stephan 型号 UMC 5 容量 5 升 功率 0.75 kW 300-3000转/分。 无级可变 手动剥离墙面 冷却/加热 不锈钢碗 即用型状态
实验室加工厂 制作:斯蒂芬 型号:UM-12(万能机) 货号: 714.381.07 功率: 1.5 kW 建造年份:1989年 配备各种混合工具和备件 长宽高: 410 x 400 x 600 mm 长宽高(外壳): 950 x 450 x 360 mm
实验室加工厂(通用机器) 制造商: 斯蒂芬 类型: 联华电子 12-F 商品编号: 712.673.01 建设年份: 1986 功率: 1.8 千瓦 380 伏,50 赫兹 150-2800 转/分 速度控制 带双层夹克,视镜 带新控制柜 条件非常好 根据要求:带小型真空泵 磅高系统: 500 x 400 x 640 mm LBH 控制柜: 600 x 600 x 220 mm 磅泵: 270 x 220 x 210 mm
带真空泵 速度控制 FU 带双层夹克 交换机 移动车 温度计 操作说明 备件 尺寸(磅高): 1000 x 700 x 1300 mm 重量: 约 150 公
提供 斯蒂芬微切割 型号: MCHD 180 约:约2003年 - 驱动:95千瓦 - 50赫兹 - 每小时起重能力:约2500至最大8500公斤(取决于产品 - 漏斗版 - 电机轴上带进给螺杆 - 切割套件直径:180 mm - 包括一个新的切割套件 (切割头:1级,Z 24;阶段 2, Z 24) (切割环:2 x MCH-D 180,可根据要求提供 0.2 毫米至 3.0 毫米的间隙尺寸) 机器价格包括一个新的切割套件:€42.900,00。 没有切割套件的机器价格€34.900,00。 保修期:3个月,易损件除外 非接触式破碎或乳化,无金属磨损
斯蒂芬·费因斯特泽克莱纳 型号: 美冠-D 60 驱动功率:49 KW 小时性能取决于起始产品的所需细度。 从 2000 到 3500 Kg/小时 这台机器已经准备好运行,就像客户一样。 使用二手但翻新的切割装
斯蒂芬·费因斯特泽克莱纳 型号: 美中厚-D 50 驱动功率:44 KW 小时性能取决于起始产品的所需细度。 1500 至 3000 Kg/小时 机器已准备好从客户处进行操作。 使用新的切割套件 全面翻新6个
斯蒂芬·费因斯特泽克莱纳 / 微切割 类型:美中医。D-180型 建造年份:约1993年 每小时起重能力:约2500至最大8500公斤(取决于产品 漏斗版本 电机轴上带进给螺钉 切割套件直径: 180 mm 包括一套新的切割装置 切割头:第 1 级,Z 24 切割环:1 级,可根据要求提供 0.2 mm 至 3.0 mm 的间隙尺寸 切割头:阶段 2, Z 24 切割环:第 2 级,可根据要求提供 0.2 mm 至 3.0 mm 的间隙尺寸 机器价格:€32.900,00,带新切割套件;€24.900,00 不含切割套件 非接触式乳化,粉碎无金属磨损
复古版型 这就是你的机器的样子 斯蒂芬粉碎机 类型: 壁针长-D 60A 或美瑞郎-D 30 机器几乎完全尼罗斯塔 与产品接触的部件 100 % 尼罗斯塔 功率:约45千瓦 产品容量约 2000 Kg 小时 MCH-D 30 产品容量约 4000 Kg 小时 MCH-D 60 R
斯蒂芬 TC300 康比卡特 用于烹饪,分散,混合蘸酱,酱汁,调味料,奶油, 酪制品,奶油奶酪,奶油奶酪等的机器! 完全由不锈钢制成的机器 西门子电控 主电机 3 速, 包括真空系统, 包括带仪表的水计量系统, 带称重系统的计量装置,用于称量骨料、直接蒸汽喷 、蒸汽过滤器清洁站 完整的工作平台 更多信息请垂询 机器按原样提供! 我们可以进行彻底的大修/翻新,但需额外付费 联系人:01722894884 info@weyrauch-maschinen.com 斯蒂芬 TC300 康比卡特 用于烹饪,分散,混合蘸酱,酱汁,调味料,奶油, 酪制品,奶油奶酪等的机器! 完全由不锈钢制成的机器 西门子电控系统 主电机 3 速,包括真空系统,包括带计数器的水计量系统, 带称重系统的加药装置, ...
斯蒂芬 TC300 康比卡特 多功能卧式机器,用于烹饪,熔化,带有真空系统。 机适用于:分散、混合蘸料、酱料、调味料、奶油 加工奶酪制品、奶油奶酪制品、奶油奶酪等! 滚筒容量300升,最高工作温度105C,工作压力-1.0至1.0ba r 该机器以前曾在加工奶酪厂工作,用于生产加工奶酪 品 机器完全由不锈钢制成,底座由不锈钢制成,原装由 蒂芬 新型电子控制西门子 S7 - 带显示屏 主电机变频调速0-3000 rpm,3个均质仪表 主轴密封:水冷 集成式热交换系统 运输翼,盖子和滚筒上有刮刀 真空系统, 带仪表的水计量系统, 直接蒸汽喷射, 通过滚筒中的探头进行温度监控,可自由编程 用于打开/关闭灌装滑块和提升/降低料斗的液压单元 通过气动排放阀排空,直径 ...
斯蒂芬 TC300 康比卡特 多功能卧式机器,用于烹饪,熔化,带有真空系统。 机适用于:分散、混合蘸料、酱料、调味料、面霜 腐殖质制品、奶油芝士等! 滚筒容量300升,最高工作温度105C,工作压力-1.0至1.0ba r 该机器以前曾在加工奶酪厂工作,用于生产奶酪浸渍 品 机器完全由不锈钢制成,底座由不锈钢制成,原装由 蒂芬 新型电子控制西门子 S7 - 带显示屏 主电机 3 速 750/1500/3000 rpm, 3 均质度计 主轴密封:水冷 集成式热交换系统 运输翼,盖子和滚筒上有刮刀 真空系统, 带仪表的水计量系统, 直接蒸汽喷射, 蒸汽过滤器清洁站 带有称重系统的计量装置,用于称量骨料, 完整的工作平台,带料斗,用于定量给料 通过滚筒中的探头进行温度监控,可自 ...
斯蒂芬 TC300 康比卡特 多功能卧式机器,用于烹饪,熔化,带有真空系统。 机适用于:分散、混合蘸料、酱料、调味料、奶油 加工奶酪制品、奶油奶酪制品、奶油奶酪等! 滚筒容量300升,最高工作温度105C,工作压力-1.0至1.0ba r 该机器以前曾在加工奶酪厂工作,用于生产加工奶酪 品 机器完全由不锈钢制成,底座由不锈钢制成,原装由 蒂芬 新型电子控制西门子 S7 - 带显示屏 主电机变频调速0-3000 rpm,3个均质仪表 主轴密封:水冷 集成式热交换系统 运输翼,盖子和滚筒上有刮刀 真空系统, 带仪表的水计量系统, 直接蒸汽喷射, 通过滚筒中的探头进行温度监控,可自由编程 用于打开/关闭灌装滑块和提升/降低料斗的液压单元 通过气动排放阀排空,直径 15 ...
款号: 2681 型号: 阿尔瓦克-11-DG 序列号: 0014-5167 建造年份:2004年 腔室尺寸: 500 x 500 x 200 mm 密封条: 500 mm 泵: 普旭, 63 立方米/小时 电源: 3 x 400V, 50Hz, 1.5kW 尺寸: 800 x 60 x 1000 mm 带气体冲
The frame mounted inline Stephan Microcut MCH 20K is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a processed cheese / vegan cream cheese plant. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements.Infeed hopper (± 120 liter) with feeding spiral with gear motor for high viscose products and big pieces, who moves the product to the cutting / emulsifiying set. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 380 V - 27,5 A - 2.925 r ...
Stephan Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. Previously used in the processed / melted and cream cheese production (vegan as well). Machine bowl with top slide and a bottom valve, lid and side covers are all made of stainless steel. Machine frame in painted steel. The bowl is equiped with a double jacket for heating/cooling on the jacket including all valves, 4x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor inside the product, 3x twin cutting blades, max working pressure in the bowl -1 / 0,3 bar (protected with overpressure valve), max temperature in the bowl 95 °C, bowl volume: 300 liter, 1x infeed hydraulic slide gate on the top for main product including big up and down movable hopper (hydraulic), 1x outfeed valve at the bottom for the outfeed o ...
STEPHAN Universal Machine for the production of processed cheese, convenience products, vegan spreads and confectionery. The bowl is equiped with a double jacket for heating/cooling on the jacket, 3x direct steam injection nozzles for direct injection of (culinair) steam inside the product, temperature sensor (PT-100) inside the product, 2x mixing blades, max working pressure in the bowl 1,5 bar, max temperature in the bowl 127 °C, vacuum connection on the bowl, dearation connection on the bowl, pneumatic outfeed valve connecting for emptying the bowl without tilting (valve itself excluded), scraper of the wall is electric driven (slow turning), 3 manual tightening clamps. Main motor for the cutting knife: 380 Volt - 50 Hz - 10 / 17 kW - 720 / 1.470 rpm - 28 / 36 Amp. Stand alone main operation and control panel with relay controls and on/off switches., Type of Machine: Universal machin ...
Stephan Combicut TK 850 Mixer / Universal Machine for the production of bakery products, convenience products, vegan spreads and confectionery. Previously used in the chocolate production. Machine frame, bowl with slides, lid and side covers are all made of stainless steel. The bowl is equiped with a single jacket, 3x twin cutting blades, overpressure valve, bowl volume: 870 liter, hydraulic slide gate infeed and a valve connection infeed on the top for main product, at the bottom a hydraulic slide gate discharge for outfeed of the ready product (hydraulic controlled), 3x connections for pneumatic controlled ingredient valves on one side of the bowl (including 2x pneumatic valves) and 1x connection for pneumatic controlled ingredient valve on the other side of the bowl (including 1x pneumatic valve). Single jacketed lid with scraper of the wall (electric driven ± 25 rpm), stainless stee ...
General SKU300U600 LocationBarneveld MakeStephan TypeKG 150 P No.B 715.817 Year of construction1989 Main Features MaterialStainless steel Motor1.8 KW Specified Features - Sieve granulator MaterialStainless steel 1.4016, Stainless steel 1.4301 (304) Granulating sievecheck Gratercheck Rotor sizesdia. 175x135 mm Sieve sizesdia. 178x145 mm Sieve perforation0,6 mm With hoppercheck Inletdia. 100 mm Outletdia. 300 mm Motor1,8 kW 380 Volt With variable speed drivecheck Speedmax. 284 rpm With extra sieves0,8 mm , 2 mm (2x),3 mm (2x), 4,2 mm Information Mounted on wheelscheck With switchcheckSieve granulatorsStephanSieves > Sieve granulatorsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Ne ...
General SKU408S980 LocationBarneveld MakeStephan TypeKG 150-S No.712.730.04 Year of construction1987 Main Features MaterialStainless steel Motor1.8 KW Specified Features - Sieve granulator Gratercheck With hoppercheck Inletdia. 100 mm Outletdia. 290 mm Motor1,4/1,8 kW 380 Volt Speed142/284 rpm MaterialStainless steel Information Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Weight200 Kg Floor space0,9x0,8 M Total height1,4 MSieve granulatorsStephanSieves > Sieve granulatorsBrand > Stephan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
STEPHAN vacutherm stainless steel machine with emulsion pump 450 liter capacity Description The STEPHAN Vacutherm® system is a compact process unit. It has been designed primarily for the production of prepared food. Several process steps are combined in one machine. Liquid and solid ingredient processing as well as particle incorporation can be performed. The STEPHAN Vacutherm® system has been developed and optimized in collaboration with manufacturers of prepared foods. Precisely controlled processes result in high product quality and repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in a single machine. These are mixing, dispersing, downsizing, heating, cooling, pasteurizing, deaerating, and emulsifying. Liquid and solid ingredient processing as well as particle incorporation can be performed. In add ...
STEPHAN double body mixer with vacuum. 600 liters capacity Description The STEPHAN Vacutherm system is a compact process unit. It has been designed primarily for the production of prepared foods. Several steps of the process are combined in one machine. The processing of liquid and solid ingredients can be done, as well as the incorporation of particles. The STEPHAN Vacutherm system has been developed and optimized with the collaboration of prepared food manufacturers. Precisely controlled processes result in high quality and product repeatability. The highly flexible system produces a wide range of food products. The compact system combines several process steps in one machine. These are mixing, dispersion, size reduction, heating, cooling, pasteurization, deaeration and emulsion. The processing of liquid and solid ingredients can be performed, as well as the incorporation of particle ...
Used Stephan Model UM 12 high intensity/universal vacuum mixer. Stainless steel jacketed mixing bowl has total capacity 15 litre, working capacity approx. 12 litre. Bowl rated -1/atmospheric pressure at 95°C max. temperarure. Stainless steel nonpressure jacket capacity 0,8 litre, 95°C max. temperature. Has bottom S-blade type of agitator driven via dual speed el. motor 1.5/1.9 kW, 1420/2810 rpm, 50 Hz, 400 V. The vessel has top entry manual teflon wall scrapper. Integrated el. switchboard with local control panel. Also includes vacuum pump DVP Vacuum Italy model LB.5WR and el. heater Thermo Haake model C10 with circulation pump for heating jacket.