涂胶机 二手 出售

Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...

品牌 1210F - KDF210 优化 品牌：勃兰特 型号： KDF 210 -1210F 建造年份：2014 控制：易于控制 10+ 非接触式路线控制 通过启停光学指示传感器控制进给 屏幕：LCD，4 20字母，4个程序存储器 配置： 链式输送机进料：为运输链提供中央润滑的标准设备� �� 顶压辊筒/产品导向：Zentra 控制，2 台滚筒输送机彼此相对放置 关节铣削单元： 2 x 0.75 KW 200 HZ 包括采用 DIA 设计的关节铣削套件，可通过 Siko 计数器手动定位，最大去除距离为 3 mm，工件厚度最大为 40 mm 涂胶单元 A3 涂胶部件，用于热熔胶，可用于 PU 应用、弹匣、压力区，通过中央控制实现电动气动 2 点定位 压力区：第 1 个压路机驱动，2 个压路机自由运行，以实现良好和恒定的压实 横切单元：2 0.18KW 12，000 rpm 铣� ...

工厂描述将在未来几天内发� ... 更多信息

Single-sided edge banding machine Make: HOMAG Type: KAL 210 AMBITION 2264 Year of construction: 2014 One-sided edge banding machine for editing of straight workpiece edges and for gluing and post-processing in the longitudinal and transverse pass. Overview of aggregate equipment: - Separating agent spray unit - Joining milling unit - Gluing unit A20 with 2 rolls - end trimming unit HL84 - Pre-milling unit BF10 - Form milling unit FK11 manual - Profile scraper PN10 - Finishing unit Feed 18 - 25 m/min. Feed max. with FK11 20 m/min. Working height 950 mm Pneumatic connection 6 bar Total length 7845mm Workpiece thickness 8 - 60 mm Edge height max. = workpiece thickness + 4 mm Edge material roll 0.3 - 3 mm Edge material strips 0.4 - 20 mm Aggregate equipment: - Separating agent spray unit top/bottom - Joining milling unit 2 motors each 3 kW, 150 H ...

Description: Serial n°: 200.07.006.15 maximum adhesive thickness in 10 mm maximum panel thickness 60 mm maximum thickness of rolled material 3 mm minimum piece length 140 mm minimum workpiece width 70 mm maximum feed rate 12 m/min electric height adjustment pre-heating zone granular gluing system glue container below the food chain changeable glue tank suitable for PUR glue spraying system straightening unit End cutting unit 2 motors flush/radial/bevelling stations 1 Edge copying unit 1 motor scraping unit Edge scraper, Flat scraper polishing unit strip magazine synchronised aggregate NC axis(es) machine model from left to right machine length in 5.140 mm FORMAT 4 E-MOTION control Loading cost to be definedserial number: 200.07.006.15, edge thickness: 10 mm, workpiece thickness: 60 mm, feed: 12 m/min, control: FORMAT 4 E-MOTION, total power approx: 11 kW, Approx. Onsite Dimension. (l x  ...

比雅斯阿克伦 1440 NC控制面板 带 10 英寸显示器的数控 板高度：10 至 60 mm 辊边厚度：0.4 至 3 mm 带材边缘厚度：0.4 至 10 mm 最小板长： 140 mm 最小板宽（长度为 140 mm 时）：85 mm 最小面板宽度（长度为 250 mm 时）：50 mm 链条进给速度：12 m/min 两个额外的胶水托�

带接头/成型铣床的封边机 Brandt Highflex 1220 FC YOC 2015 工件厚度 8 - 60 mm 边缘厚度 0.4 - 3.0 mm 进给速度 10 米/分钟 连接铣削 – DIA 工具 涂胶机组 接触式加热靴 压力区 气动套件 横切单元 齐平铣削单元 型材绘制刀片单元 Schwabbelaggregat 电子控制 机器长度 4200 mm 机器尺寸 宽 x 高 1300 x 2180 mm 重量 1400 kg

品牌 1110F - KDF110 优化版 品牌：勃兰特 型号： KDF 110 建设年份：2015 手机号码： 0-261-20-5386 控制：易于控制 10+ 非接触式路线控制 通过启停光学指示传感器控制进给 屏幕：LCD，4 20字母，4个程序存储器 配置： 链式输送机进料：为运输链提供中央润滑的标准设备� �� 顶压辊筒/产品导向：Zentra 控制，2 台滚筒输送机彼此相对放置 关节铣削单元： 2 x 0.75 KW 200 HZ 包括采用 DIA 设计的关节铣削套件，可通过 Siko 计数器手动定位，最大去除距离为 3 mm，工件厚度最大为 40 mm 涂胶单元：用于热熔胶的A3涂胶部件，可用于PU应用， 弹匣，压力区，通过中央控制进行电动气动2点定位 压力区：第 1 个压路机驱动，2 个压路机自由运行，以实现良好和恒定的压实 横切装置： 0.18  ...

Description: machine number: 0-261-20-8279 workpiece thickness: 8 - 50 mm edge material thickness: 0,4 - 3 mm feed speed: 11 m/min extraction diameter: 3x80/1x100 mm pneumatics: 6 bar  , please also have a look at the PDF document of this machine serial number: 0-261-20-8279, edge thickness: 3 mm, workpiece thickness: 8 - 50 mm, feed: 11 m/min, Approx. Onsite Dimension. (l x w x h): 4,153 x 1,525 x 2,182 mm, weight approx.: 1,300 kg

Description: GRIGGIO GB 5/8 RA Edgebander Workpiece thickness: 10 - 60 mm Max thickness of the panel: 60 mm Min width of the panel: 60 mm Min length of the panel: 120 mm Min thickness of the panel: 10 mm Edge thickness: 0,4 - 8 mm Edge dimensions in roll: 0,4 - 3 mmserial number: 15E000243900300, control: SIEMENS SMART LINE, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,100 x 1,600 mm, weight approx.: 2,500 kg

Description: serial number 209/1-506 series KAM15V3 ordernumber 15506565 control PPC 315 with Touchsreen feed rate: 10 - 18 m/min workpiece length: min. 160 mm workpiece width: min. 60 mm workpiece thickness: 8 - 60 mm edge thickness: 0.4 - 8 mm serial number: 209/1-506, workpiece thickness: 8 - 60 mm, feed: 10-18 m/min, control: PPC 315, Approx. Onsite Dimension. (l x w x h): 5,340 x 1,823 x 2,030 mm, weight approx.: 1,750 kg

制造商： Cefla， 类型： 热熔 SP1-EVO， 年份： 2015， 2 辊机： 是， 最小-最大.工件高度（毫米）： 0-80， 工作宽度 mm： 1300， 滚筒冷却系统： 黑尊， 送料 - kW： 0，75， 进给速度 最大米/分钟： 5-20， 压缩空气棒： 2-10， 免费文本： 墨水.IR Vorheizer für Werkstücke 11 kW， und Pume Schmelzanlage， 年份 ：2015

封边机 Felder G480 提供以下单位： 切割、连接、平铣、圆角、刮刀、表面刮刀 建造年份 2016 机器处于最佳状态，可以运行。 可能会有更改、错误和先前的销售！ 维修/备件 MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH 机械工程 艾森缆车大街 25 CH-4900 朗根塔尔/瑞士 电话 0041 62 966 18 32 传真 0041 62 966 21 12

Description: serial number: 1000017130 control: BIESSE  , max. glue thickness: 3 mm max. glue-on height: 65 mm max. thickness of roll material: 3 mm min. workpiece length: 100 mm min. workpiece width: 150 mm max. workpiece thickness: 90 mm max. feed rate: 25 m/min.  , comfortable looptec system BIESSE 2 glueing units in the row (exchange of color from panel) CNC set up off all machine from panel maximum thickness of panel: up to 90 mm Nordson system for PUR included (wtih conecton to one gluing unit) airforce system change of glue + tape based on the barcode CNC grooving unit  , please also have a look at the video and the PDF documents of this machine serial number: 1,000,017,130, workpiece thickness: 90 mm, feed: 25 m/min, control: BIESSE, Approx. Onsite Dimension. (l x w x h): 12,000 x 3,500 x 2,000 mm, weight approx.: 12,000 kg

Working width: 1300mm, roller diameter: 185mm, max. opening height: 100mm, working height: 800mm, power: 0.37kW. ... 更多信息

胶水吊具 S2R 400 型 。新增功能 2016年 行政 ：是 伏特。400 / 50 最大工作宽度 mm. 400 最大工作高度 mm.100 n.02 橡胶� ... 更多信息

Description: serial number: 6294 , edge thick: 0,4 - 3 mm edge thick with L-Tec: 0,7 – 3 mm min. panel lenght without rounding unit: 70 / 120 mm min. panel lenght with rounding unit: 95 mm installed power: 10 kW min. panel width without roundin unit: 95 mm min. panel width with roundin unit: 120/250 mm max panel thick with pre-milling Unit: 60 mm max panel thick with rounding unit: 60 mm max panel thick without pre-milling and rounding unit: 60 mm min panel thick: 10 mm working speed: 11 - 18 mt/1’ dust outlets: Nr. 02 Ø 150 mm pneumatic operating pressure: 6 ATM , supply 400 V, 3 phases, 50 Hz , current 9 A d please also have a look at the pdf files of this machineserial number: 6,294, edge thickness: 0.4-3 mm, workpiece thickness: 10 mm, feed: 11-18 m/min, control: BM PCS12, total power approx: 10 kW, Approx. Onsite Dimension. (l x w x h): 5,700 x 850 x 1,800 mm, we ...

Description: Machine-nr.: 0-261-26-5028 Control: EC 10+ Speed-controlled control with optical start-stop indicator sensors Operating switch: ergonomic LCD switch mounted on the head Border thickness: 0.3 mm / max. 8.0 mm Band cutting device: 0.4 - 3.0 mm (Max. 3.0x30 mm / 1.0x55 mm) Band width edges: max. (1x) 55 mm / (3x) 45 mm Workpiece thickness: 8 - 50 mm . Workpiece width: min. 60 mm Workpiece overhang: min. 38 mm Performance: 11 m/min Workpiece pre-heating Roll magazine: Max. ø800 mm Cut-off shear: 3 mm Glue aggregate1: Hot melt granule Glue pot under glue output roller Gluing roller in travel or - in counterflow Glue aggregate 2: Airteq Hot-Air glue aggregate Pressure zone: Pneumatically driven (1st pressure roller, 2nd roller running freely ensures good compaction) Air supply units: (2x) 2.2 kW, 200 Hz Includes mounted DIA cutters Gluing unit: workpiece preheating Pressure zone ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The work ...

Description: serial number edgebander: 0-200-96-0454 supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 40 A fuse 50 A control voltage 24 V serial number return system: 0-284-96-1370 , supply 400 Y/230 V, 3 phases, 50 Hz maximum operating full load current 3,3 A fuse 16 A control voltage 24 V ATTENTION: Part marked in red NOT included Please also have a look at the pdf files of this machine  ,serial number: 0-200-96-0454, Approx. Onsite Dimension. (l x w x h): 8,365 x 2,000 x 1,820 mm, weight approx.: 5,000 kg