规格: 03 电动皮带 mm 7,000 x 1,100,带可调节支架,用于纵向运输 05 传送带 mm 10,000 x 1,100,带可调节支架,用于纵向运输 01 电动皮带 mm 2,500 x 1,100,带可调节支架,用于侧移运
制造商: Ligmatech, 类型: TD/31/25/12, 年份: 1997, 控制: 西门子, 车削装置: 温德沃里奇通, 最大工作长度 mm: 2800, 工作最大毫米: 1300, 进给速度最大米/分钟: 10-30, 进料速度连续可调: 是, 净空可调: 是, 滚轮直径 mm: 80, 工作高 mm: +-900, 发动机功率 kW: 6, 尺寸 L x W x H mm: 6200 x 2800, 自由文本: 法赫巴尔·罗尔, 年份 :1997
制造商: 利马泰克, 类型: MPS 20, 年份: 1998, 工件宽度 最小-最大 mm: 800, 最小-最大工件长度(毫米): 2500, 最小-最大工件高度(毫米): 1300, 进给速度 最大米/分钟: 约 30, 进给速度连续可调: 是, 机器索具: 自动机, 压缩空气棒: 6, Wight 约 kg: 3000, 年份 :1998
制造商: 利格马泰奇, 类型: Stapelmat ZHK 10, 年份: 1990, 控制: 利格玛奇, 工件宽度最小-最大 mm: 140-800, 最小-最大.工件长度(毫米): 160-1200, 最小-最大工件高度(毫米): 10-60, 年份 :1990
制造商: 利马泰克, 类型: 山地车 200/15/08 , 年份: 2011, 控制: 否, 工作长度毫米: 1500, 总最高毫米: 约.650 毫米, 总高度毫米: 约.650 毫米, 总功率 kW: 0,5, 进料速度最小-最大米/分钟: 5-20, 进料速度连续可调: 是, 年份 :2011
制造商: Ligmatech, 类型: MTB 200/25/08, 年份: 2011, 控制: 否, 工作长度 mm: 2000, 工作宽度: 800, 总高度mm: 约 600, 皮带宽度: 800, 总高度 mm: 约.600, 发动机功率 kW: 0,75, 进给速度最小-最大 m/min: 5-20, 进给速度连续可调: 是, 工作高可调 mm: 是, 活动: 否, 年份 :2011
制造商: MTH 150/28/08 利格马泰奇·科普萨布塞策, 类型: 运输和阿布西茨站, 年份: 2011, 控制: 否, 工作高度 mm: 约.400-1200, 生产线上的机器: 战争在利尼, 皮带运输: 是, 皮带宽度: 约.800, 发动机功率 kW: 0,5, 进料速度最大米/分钟: 5-20, 进料速度连续可调: möglich, 年份 :2011
制造商: LIgmatech 运输/干燥站, 类型: 德瑞站, 年份: 约 1998, 控制: 否, 工作长度 mm: 1500, 工作宽度 mm: 1200, 总高度 mm: 850, 总高度 mm: 850, 免费文本: Antrieb Band 肌肉 nachgrüstet werden, 年份 :ca.1998
制造商: 利格马泰奇·科普索夫里希特, 类型: MTK 10, 年份: 1999, 控制: 是, 主体长度最大 mm: 2200, 工作高度 mm: 约 500, 气动: 是, 滚动动物运动: 是, 单机: 是, 总长度: 2500, 工作高度可调 mm: 是, 肺毛蒂彻·科普索夫里希特, 年份 :1999
制造商: Ligmatech, 类型: Profi TD/31/25/12, 年份: 约 2004, 控制: 西门子, 车削设备: 温德沃里奇通, 最大工作长度: 2800, 工作机最大毫米: 1300, 进料速度最大米/分钟: 10-30, 进料速度连续可调: 是, 头部可调: 是, 滚轮直径 mm: 80, 工作高 mm: +-900, 发动机功率 kW: 6, 尺寸 L x W x H mm: 6200 x 2800, 自由文本: 法赫巴尔·罗尔, 年份 :ca.2004
Description: LIGMATECH 3x Driven Roller Conveyor dimension (l x w x h) approx. (3 packs) 8330 x 1320 x 710 mm 7110 x 1320 x 710 mm (x2) Approx. Onsite Dimension. (l x w x h): 8,330 x 1,320 x 710 mm, weight approx.: 2,000 kg
工件返回 品牌:利格玛泰克 型号: ZHR 15/XX/RE 年份: 1995 用于正确的机
workpiece return Brand: Ligmatech Type: ZHR 15/XX/LI The workpiece return enables one-man operation on edge banding machines. Workpieces coming out of the machine are roller conveyor, which transports the parts to a lifting station promotes. Via a scissor mechanism the parts are Upper pressure promoted this to an inclined plane, consisting of roller rails, transports. On this inclined roller conveyor, the parts slide by their own weight to the Operator back. The driven roller conveyor is equipped with a turning station the parts coming out of the machine crosswise rotated by 90 degrees and thus conveyed back longitudinally can. To support long transverse arriving parts an additional support roller track is attached, which can be folded down when not in use. Similarly, when not in use, the inclined roller The return path can be folded vertically upwards, so t ...