砂带磨床

规格： 工作区域： 2400 x 800 mm 高度调节： 550 mm 装机功率：3千瓦 垂直行驶速度 最大皮带长度： 6650 mm 皮带轮： Ø 200 mm

型号：0021 品牌：玻尔 - 奥地利 型号： 150/330 皮带砂光机砂垫 用于实木和单板石墨带砂光机的通用砂垫 - mm 330 x 150 外形尺寸 mm 330 x 150 x 100 h 重量 kg 4

规格： 装机功率： 5.5 kW 2 个飞轮 Ø 450 mm 砂带长度： 4900 mm 2 种速度设�

输送带宽度：150 mm皮带长度：2000 毫米输送带速度：30 米/秒总功率要求：3.6 千瓦机器重量 约： 138 t空间要求 约： 995 x 490 x 890 mm设备：砂光带也可作为 S 型提供，带吸力，需额外付费此广告是使用 ModulMWS 创建的， LogoTech oHG 的机器管理�

输送带宽度：75 mm皮带长度：2000 毫米输送带速度：30 米/秒研磨面积：75 x 540 mm总功率要求：3 千瓦机器重量约：90 千克空间要求 约： 995 x 415 x 890 毫米设备：砂光带也可作为 S 型，可进行额外抽吸数据 fü，此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理�

砂光单元数量：2 st。砂光宽度： 约 180 mm 最大砂光高度： 12 - 140 mm

Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machine--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment work- permanent dimensional accuracy- comp ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sander---------------------------------basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profileswith additional, statically calculated bracing for optimalvibration damping.Staggered grinding units with large dimensionedBelt drive drums for slip-free belt travel. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet belt run. All guides as a ball linear set on hardened andpolished waves. Lasting precision thanks to protection against dust and dirtof the sphere linear sets. Contact roller and sanding pad in a balanced ratioto the grinding belt grain load. The large dimensioned drive drumsguarantee the full transmission of the ...

Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive  ...

带宽：75 mm皮带长度：2000 mm皮带速度：37 m/min总功率要求：3 kW机器重量约：110 Kg空间要求约：1x0.5x1 m此广告的数据 fü，此广告是使用ModulMWS创建的 - LogoTech oHG的机器管理�

台式带式砂光机 霍弗电机 4.2KW 格式 2.50 x 1.20 �

木材和金属带式研磨机，卷间距约 3000 mm

Working width: 300 mmNumber of sanding units: 6 st.Workpiece thickness max.: 8-230 mmWeight: 3100 kgLöwer double-sided grinding machine DSM 3304 GDR---------------------------------Manufacturer short description:Double-sided single wood sander for sandingof solid wood such as window wood orFurniture components made of MDF etc. Stable top designwith electronic articulated pressure shoes for fine grindingwell-planed or veneered surfaces.Sanding units arranged one after the otherFine grinding, disc aggregates for defibering grinding,Cleaning brush, from above and below as follows:1. Belt sanding unit with articulated pressure shoe2. Belt sanding unit with articulated pressure shoe3. Disc unit with brush sanding flaps diameter 320mm4. Cleaning brush with Tempicofibre trim diameter 120mm---------------------------------detailed long text of the manufacturers description as well as theInstall ...

Number of sanding units: 8 st.sanding width: 180 (260) mmSanding height max.: 160 mmDimensions (length / width): 3065x1600x1900 mmweight of the machine ca.: 1500 kgLöwer Leistomad SDWindow single wood intermediate sanding machine---------------------------------Machine factory tested by Löwer!Automatic fine grinding machine for wood grinding (smoothing, defibering andEdge breaking) or intermediate sanding of profiled window bars. With soft discTechnology for the visible surfaces as well as automatically safe profile andWidth adjustment.- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- 1 softisc unit Ø=200mm above 0.75kW,- 1 slat roller unit L=200mm above 0.75kW- 1 soft disc unit Ø=200mm below 0.75kW,- 1 lamella roller unit L=200mm below 0.75kW,- 2 lamella roller units on the side, each 0.37kW, L=100mm, D=200mm- Linear guidance of all grinding units via linear ball  ...

Number of sanding units: 8 st.sanding width: 150 mmMachine can be inspected during production!Leistomat - Finisch and intermediate leveling machine Löwer LZ 8-------------------------------------------------- -------------------for finish sanding (smoothing, defibering and edge breaking)or intermediate sanding profiled window latch- Finish and intermediate sanding machine with eight sanding blade aggregates,2 surface units at the top (synchronism / counter-rotation)2 surface units below (synchronism / counter-rotation)4 profile units with angled arrangement top right,bottom right, top left, bottom left, all mating- linear guidance of all grinding units overLinear ball bearing sets on hardened shafts- Timed immersion of all in the opposite directionrotating grinding units directly above the incomingWorkpiece edges to avoid looping through thePrimer in the front edge area. By theIt is pos ...

码： 0198 品牌： MABO - ITALY 型号： DELTA 带双鹅颈带砂光机，适用于木材、金属、铝、复合材� �� 工作台长度 mm 3000 工作台宽度 mm 800 工作台自动升降 - 垂直行程 mm 550 电机 2 转速 rpm 1400/2800 - hp 3/4 滑轮直径 mm 200 吸气马达 Hp 0,5 应急绳 吸口直径 mm 120 外形尺寸 mm 4400 x 1100 x 1550 h 重量 kg 420

规格： 卧式皮带磨床 工作台宽度 mm： 800 工作台长度 mm： 2，900 砂光带宽度 mm： 1，500 砂带长度 mm： 8，000 最大工作高度 mm： 600 主机功率 HP： 4 带砂光�

带材宽度： 75 mm带长： 2000 mm带速度： 30 m/s： 75 x 540 mm总功率要求： 3 kW机器重量 ca.： 90 kg机器尺寸 校准： 995 x 415 x 890 mm

出售二手打磨机械斯坦曼。上下纸，超宽，200kw。1990� ��短用�