描述: |
砂带磨床 LÖWER Leistomat SD
二手机
Number of sanding units: 8 st. sanding width: 180 (260)
mm Sanding height max.: 160 mm Dimensions (length / width):
3065x1600x1900 mm weight of the machine ca.: 1500 kg Löwer
Leistomad SD Window single wood intermediate sanding
machine --------------------------------- Machine factory
tested by Löwer!
Automatic fine grinding machine for wood
grinding (smoothing, defibering and Edge breaking) or intermediate
sanding of profiled window bars. With soft disc Technology for the
visible surfaces as well as automatically safe profile and Width
adjustment.
- 2 lamella roller units on the side, each
0.37kW, L=100mm, D=200mm - 1 softisc unit Ø=200mm above
0.75kW, - 1 slat roller unit L=200mm above 0.75kW
- 1
soft disc unit Ø=200mm below 0.75kW, - 1 lamella roller unit
L=200mm below 0.75kW, - 2 lamella roller units on the side, each
0.37kW, L=100mm, D=200mm
- Linear guidance of all grinding
units via linear ball bearing sets hardened waves
-
Time-controlled immersion of all lamella roller units directly
above the incoming workpiece edges. By immersing it is
possible To be able to deliver aggregates deeper into the
profiles.
- Motorized workpiece thickness adjustment of the
machine
- variable grinding flap speed via frequency
converter to adjust the Grinding intensity using frequency
converters (separately for discs, surface rollers and side
rollers)
- Disc aggregates as soft discs with Velcro
fasteners for grinding discs (wood pulp)
- Feed via three
lower and one upper conveyor belt and spring-loaded Pressure
rollers with continuous speed 5-15m/min
- Parameters that can
be set using the touch panel are workpiece thickness and
workpiece width (left side units individually), immersion
depth of side units, Spindle speed, feed speed
- Saving
the parameters as machine programs in program mode
- Working
in automatic mode with non-contact Workpiece width detection and
profile detection as well as automatic Adjustment of the sanding
units to the workpiece width and profile shape (Workpiece height
is set in advance)
- pneumatically clocked driven feed
roller, automatic clamping of the workpiece as well as retraction
after unit adjustment
- Red/green indicator lights to
indicate operational readiness
- shortest workpiece length
380mm
- Transport belt width 200mm
- max. workpiece
width 180mm
- Workpiece height 12-120mm
- Suction
connection 5 x 100mm diameter
- Sensor-controlled tool
blow-off directly on the discs
- Length (housing) x width x
height (mm): 3065x 1500 x 1600, complete length: 3800mm G612123
(including inlet roller conveyor with stop for Leistomat
SD)
- Weight: approx. 1500 kg
- Operating voltage
400V, 50Hz, 3P, air connection 6 bar
- CE
version --------------------------------
Included
options:
Adjust the machine as follows: - max. workpiece
thickness: 160mm
- max. workpiece width: 260mm (in the
transshipment process, workpieces must be 2x be allowed
through) Transport belt width remains at 200mm
- Side units
with grinding height 120mm instead of 100mm
- more powerful
engines for side units 0.75kw instead of 0.37
- larger
frequency converters for the side units
Quick release
disc spindle side for quick tool changes for DiscMaster 4TD or
CrossMaster 2TD (only for clockwise rotation)
Quick
release disc tool for Softdisc, Combidisc or Mediumdisc Ø
250mm (only for clockwise
rotation) ---------------------------------
(Technical
description according to the manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-2729
|