板材宽度: 3000 mm板厚: 6 mm日光开口: 450 mm柱间距: 3100 mm最大工作高度: 900 mm: 最大 135 Grad总功率要求: 4.0 kW机器重量 CA.: 9,0 t范围 长宽高: 4,0 x 2,65 x 2,0 m设备:- NC 控制 411 24- 脚踏开关- 后支撑台 2000mm- 安装的折弯工具和新的一样好!!- Dokumentation(英语:Dokumentation
sheet width: 2035 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 4145 kgdimensions of the machine ca.: 3300 x 1550 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was cr ...
sheet width: 2540 mmplate thickness: 4,5 mm STthickness at Niro-steel: 3,0 mm VAbending angle max.: 0 - 135 °daylight opening: 100 mmback stop - adjustable: 70 - 600 mmtotal power requirement: 5,5 kWweight of the machine ca.: 6275 kgdimensions of the machine ca.: 3900 x 1700 x 1900 mmDescription .- Full hardened structure- BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand- with manual backgauge, adjustable from behind- Electronic components are quality components from SCHNEIDER- electrical cabinet is integrated in the side stand- Adjustment of the hydraulic pressure to the material thickness- Adjustment of the material thickness on the bending beam is easy with a mm scale- Handle for adjusting the material thickness on the upper beam is hidden in the side stand- Segmented upper cheek The data for this ad was crea ...
sheet width: 3100 mmplate thickness: 6 mmthickness at Niro-steel: 4,5 mmdaylight upper clamping: 100 mmBending angle: 0 - 135 °total power requirement: 7,5 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: 4,5 x 1,72 x 2 mElectric 380 Volt: manuel back gauge adjustable from the front: 70 - 600 mmFoot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Machine dealer with own stock of 2500 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mmplate thickness: 2 mmcontrol: Beijer daylight upper clamping: 100 mmBending angle: 0 - 135 °upper clamping drive: 0,375 kWbend clamping drive: 1,125 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 3 x 1,1 x 1,75 mFoot switch with emergency stop: Segmented upper tool: Oil filling: exklusive Light barrier control: Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3040 mmplate thickness: 5,00 mmdistance between columns: mmupper beam stroke: 300 mmtotal power requirement: 7,50 kWweight of the machine ca.: 6,50 tdimensions of the machine ca.: 4,60 x 2,20 x 2,40 m• Operating manual• Bending angle adjustment electronically preselectable 0-130°• Touch screen controls• Bending rail• Sharpening rail 45°• Engine. Bending beam adjustment• Position-controlled back gauge up to 1000 mm• Hydraulic crowning• Automatic upper tool clamping• Goats foot rail H100 mm 3000 mm, sectionedNew price EUR 110,000.00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
板材宽度:1020 mm板材厚度:2 mm支架宽度:1020 mm弯曲角度 最大:135 总功率要求:0 kW机器重量 约:0.3 t空间要求 约:1350 x 850 x 1175 m最大弯曲角度 135手动操作上脸颊开口 45 mm,上下脸颊分段,fü的数据,此广告是使用ModulMWS 创建的 - LogoTech oHG的机器管理
Description: Serial number: 0503004E Capacity: 22 GAx48' Max. sheet width: approx. 1220 mm (manual folding machine)weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 500 x 1,200 mm
sheet width: 3050 mmplate thickness: 1,60 mmbending angle max.: 120 °stroke of upper beam: 50 mmwork height max.: 900 mmControl: konv. weight: 2120 kgrange L-W-H: 3620 x 900 x 1350 mm Machine from a plumbing or roofing shopFurnishing:- manual folding machine for thin sheet metal processing- split bending upper tool- analogue bending angle display- manual clamping of the upper beam using the side hand lever- manual pivoting movement of the bending beam- including counterweight for easy swivel design- manual backgauge Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9355195The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
水合。长折弯机 JORNS 6 米 x 1.25 毫米 插入深度 1000 mm,钣金支架 9 倍角度控制 OP 9 手动和自动,双脚开关 水。滚筒剪 约 2500 kg
规格: - 最大工作宽度 2040 mm - 最大材料厚度为 40 kg / mm²,强度 4 mm - 弯曲角度调节可预选 0 - 135 ° - 上梁的最大开口宽度/行程 350 mm - 高度可调性 - 弯曲梁 100 mm - 下梁 100 mm - 上梁驱动 400 V / 4 kW - 折弯梁驱动 400 V / 4 kW - 大约需要空间 宽 3200 x 高 1650 x 深 1500 mm - 重量约。 3900 千克
sheet width: 2020 mmplate thickness: 2 mmdaylight upper clamping: 122 mmbending angle max.: 135 °range L-W-H: 2,56 x 0,6 x 1,26 mweight of the machine ca.: 1020 kgMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
供应 23231 规格: - 最大工作宽度 2040 mm - 最大材料厚度为 40 kp / mm²,强度 5.5 mm - 弯曲角度调节 电子预选 0 - 180 - 上梁的最高工作设置 250 mm - 上梁最大开口宽度/行程 350 mm - 高度可调性 - 弯曲梁 30 mm - 下梁 90 mm - 上梁驱动 400 V / 1.5 kW - 弯曲梁驱动 400 V / 4.0 kW - 大约需要空间 宽 3000 x 高 1650 x 深 1200 mm - 约重 5500 公斤 - E.脚踏开
工作宽度: 1530 mm 适用于厚度达: 2.5 mm 的板材 上脸颊的开口宽度: 290 毫米 可调节性弯曲脸颊: 90 毫米 上脸颊驱动:1.1 kW 下脸颊驱动:3 kW 后挡板:是的 重量: 2200 kg 空间要求:800x3000x1380 mm
最大工作宽度: 2040 mm 适用于板材,最大可达: 2 mm 上脸颊的开口宽度: 90 毫米 可调节性弯曲脸颊: 90 毫米 上脸颊驱动:1.5千瓦 下脸颊驱动: 4 kW 电气。连接: 380 V kW 重量: 2600 kg 空间要求:3050 x 800 x 1350 mm
规格: 最大板材厚度: 2.5 mm 切割长度: 2520 mm 重量,大约: 2200 kg 尺寸(长 x 深 x 高),约 3660 x 800 x 1690 毫米 3个金银花段,测量值如下: - 深度 40 mm - 高度 145 mm - 长度: 540 / 785 / 1140 mm
制造商: 海因里希·科尔申机械制造厂 型号:AM 2000 x 20 机器编号:761907 建造年份:1976 重量:24500KG 一般/技术数据: 重型机械旋转弯曲机由稳定的焊接结构制成,状况非 好 工作宽度:2000mm ST 50 钢材料厚度 最大:20mm 上脸颊开口(夹紧脸颊):最大475mm 弯曲脸颊的可调节性:200mm电动高度可调 弯曲角度:130个,可通过电动旋转角度输入进行调节 上脸颊速度:6毫米/秒 弯曲脸颊速度:1.25 rpm(90 弯曲约 90 秒) 后挡板:从50-999mm电机可调,带数字长度显示 尺寸机器:(高 x 宽 x 深)3600x 4350 x 4400mm(无凹坑/带弯曲脸颊平台) 控制柜尺寸:(高 x 宽 x 深) 1800 x 1200 x 400mm 驱动功率弯曲驱动:30KW 驱动功率:22KW 电源:500V 50 HZ / 控制电压220V 配件/特殊设备: ...
型号 166.2500x7 建成于 1992 . 规格: . 有效长度 2540 mm 折弯能力 7 mm 上梁开口宽度 300 mm 弯曲梁的开口宽度 40 mm . 电机弯曲梁约合 3.8 / 4.6 千瓦 发动机上梁约合 3.0 千瓦 重量约。 7 至 尺寸,宽 x 深 x 高约 4 x 1.1 x 1.8 米 . 其他工具 操作说明
大工作宽度: 2500 mm 适用于最大: 5 mm 的板材 上梁开口宽度: 300 mm 可调节弯曲梁: 40 mm 上光宽驱动: 2.2 kW 下光束驱动: 3.5 kW 电气。电源:380 V kW 重量: 5000 kg 尺寸: 1260 x 4200 x 1400/1700 mm
板材宽度: 2500 mm 板厚: 3,00 mm 柱间距离:mm总功率要求:kW机器重量 ca.: t机器尺寸 ca.: m- 通过电位器调节弯曲角度 - 带磨削导轨、弯曲导轨、加固导轨的工具包- 手动可调后挡
MAAD HSSM 1550/1.5折边机于2017年在波兰制造,设计用于沿特定角 沿直线折折最大厚度为1.5毫米的薄钢板。这种功能 机器基于创新设计,保证了舒适的操作和广泛的应用 ,这使其成为许多不同行业的理想选择。 MAAD折片机有一个夹杆和一个折弯杆,配有不同长度的 可互换段刀。这些管片安装在内线螺钉上,由最优质 钢制成,确保机器的持久运行,同时保持出色的弯 参数。按下控制面板上的按钮后,HSSM 1500/1.5 电动折弯机以自动模式运行。弯曲杆移动到设定的角 ,然后返回其初始位置。机器的总重量为750 kg。 MAAD HSSM 1550/1.5折页机的技术参数 - 工作宽度: 1550 mm - 最大工件厚度 (Rm < 400 Mpa): 1.5 mm - 弯曲角度范围:0-150 - 弯曲杆宽度: 20 mm - 钢筋间隙: 80 mm - ...
型号 DA 425.10 建成于 1985 . 技术参数(根据手册): 有效长度 2500 mm 弯曲能力 10 mm 上梁的行程约为 400 毫米 可调节性 下脸颊约。 100 毫米 弯曲脸颊约。 100 毫米 电机弯曲梁约合 15 千瓦 发动机上梁约合 7.5 千瓦 重量约。 11
METALPRES KM4E折页机建于1980年。该机床以其稳定、坚固的结构 著称,设计用于折叠各种类型的钣金,最大长度为 2 米,可提供卓越的加工质量和精度。应用的手动控制 角度设置相结合,使机器能够适应用户的个性化需 。2023 年,METALPRES 液压折页机进行了价值约 14000 兹罗提净价的大修,在此期间更换了离合器、套筒、 括机柜在内的电气装置,并磨刀。 折页机METALPRES KM4E的技术数据 - 最大钣金长度:2000 mm - 最大板材厚度(黑钢): 5 mm - 最大板材厚度(不锈钢): 4 mm - 技术文档 - 机器尺寸(长 x 宽 x 高):2600 x 1200 x 1700 mm
chamfer lenght: 1260 mmplate thickness: 1,5 (2,0) mmbending angle max.: 135 °stroke of upper beam: 40 mmstroke of upper beam: 100 mmpower capacity: 0,75 kWweight of the machine ca.: 350 kgdimensions of the machine ca.: 1,63 x 0,92 x 1,2 mDescription.Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use open and p ...
chamfer lenght: 2060 mmplate thickness: (2,0) 1,5 mmdistance between columns: 2060 mmbending angle max.: 135 °stroke of upper beam: 120 mmweight of the machine ca.: 1,25 tdimensions of the machine ca.: 2,9 x 0,56 x 1,25 mDescription.Our folding machines are manufactured entirely in steel construction and with segmented (pan box) tools. Using the OCM is extremely easy and convenient for series production. Thanks to (Pan Box) tools, it is very convenient for the entire production to be made in the form of a box in various sizes. The movable lower beam is operated by strong springs and a manual handle. With these types, no adjustment is required for the compression of the blade on the upper jaws. With the OCM series, the upper tools can optionally be manufactured in full length. Features: Welded structural steel interchangeable upper tool with T-slot Easy to use open and press system for t ...
奥斯塔斯旋转折弯机 型号 OCM 2060-2 - 卡帕西蒂特 2040 x 1.5 毫米 - 波文梅斯分段 - 最大布伊格霍克 135 荷兰马赫 金属加工机械 恩斯赫德 - 荷兰 (距离德国边境3公里
CNC – 受控电动精密钣金折弯机(旋转折弯机),具有自动 弯角度监控功能 15触摸屏,带图形 - 用于单人或双人操作的选择开关,最大弯曲长度3,100 mm,最大板材厚度ST42 - 1.5 mm,上脸颊角度160 - 上脸颊行程面积达160 mm,后挡板带12个可折叠的停止手指 - 停止范围12至750 mm(可选1,000 mm或1,500 mm) - 行驶速度可调 - 高达500 mm / sec.,工作高度约830 mm,驱动功率3 kW,尺寸约4.3 x 1.8 m x 1.65 m, 重量 2,700 kg
CNC – 受控电动精密钣金折弯机(旋转折弯机),具有自动 弯角度监控功能 带图形的 15 英寸触摸屏 – 用于单人或双人操作的选择开关,最大弯曲长度 3,100 mm,最大板材厚度 ST42 – 3 mm,上脸颊角度 160/140 - 上脸颊行程范围达 240 mm,背切带 12 个可折叠停止手指 – 停止范围 12 至 750 mm(可选 1,000 mm 或 1,500 mm) – 行驶速度可调 – 高达 500 mm/sec.,工作高度约 830 mm,驱动功率 9 kW,尺寸约 4.6 x 1.8 m(取决于后挡风口) x 1.9 m, 重量 3,800 kg
CNC – 受控电液精密长折弯机(旋转折弯机),带自动折弯 度监控 15触摸屏,带图形 – 用于单人或双人操作的选择开关,最大弯曲长度 6,050 mm,投影 1,250 mm,最大板材厚度 ST42 – 3 mm,最大弯曲角度 135 - 上脸颊开口面积达 200 mm,背过带可折叠停止手指 – 停止范围 12 至 1,200 mm – 倾斜度高达 40 – 行驶速度可调至 500 mm/sec.,工作高度约 830 mm,驱动功率 7.5 kW,尺寸约 6.4 x 1.8 m x 1.5 m, 重量约 8,500 kg
常规或NC – 质量控制的高质量重型电液钣金弯曲机(旋转弯曲机 最大弯曲长度 2,540 mm,垂直,特别坚硬的上脸颊 – 最大弯曲角度 100 – 电动弯曲脸颊驱动(左 +右各一个电机) - 液压上脸颊运动,带同步控制 – 最大开口宽度 230 mm,工作台高度 870 mm,驱动动力液压 4 kW – 驱动动力弯曲脸颊 2 x 1.5 kW,无后挡板尺寸 3.6 m x 1 m x H 2.15 m,无后挡板重量 4,300 kg
坚固耐用的高品质手动钣金折弯机(旋转折弯机) 最大弯曲长度 3,080 mm,整个弯曲长度上的最大弯曲性能 – 钢板/ST40 – 1.2 mm – 不锈钢板 0.6 mm – 锌板、铜板、铝板 – 1.5 mm,最大开口宽度为 68 mm,最大弯曲角度 160,工作高度约为 930 mm,尺寸 3.55 x 0.75 (不含背斜)x H 1.3 m,重量 930 kg 设备:当降低弯曲的脸颊时,自动打开上脸颊(专利 - 两个开口宽度可以调节15 mm和65 mm,可调节角度停止用于可重复的系列弯曲,弯曲脸 的重量补偿,便于机器操作,卷曲的上脸颊能够按压 褶皱。可选配的机器配有行程为 750 mm 的后挡板,以及直径为 14/16/18 mm 的串珠杆的手动驱动的串珠装
供应 22569 规格: - 最大工作宽度 2040 mm - 最大材料厚度 2 mm - 弯曲角度近似 0 - 135 ° - 电动行程上梁 - 最大行程上梁 85 mm - 最大弯曲梁调节 80 mm - 手动折弯过程由偏心重量支撑 - 连接 400 V - 大约需要空间 宽 3700 x 高 1250 x 深 450 mm - 约重 1700 公斤
1990年在波兰制造的RAFAMET KM 4机械折叠机设计用于生产最大厚度为4毫米的金属板 弯曲部分,通过沿工件带的长度连续折叠制成。高度 可靠的机器还允许成型钣金盒,缠绕钣金边缘以及在 装特殊设备后进行缠绕和压接连接。 折叠机配有控制面板、挡块、工作区照明和脚踏控制 板。该机器具有与其双折叠机OZAMECH KM 4相同的设计和外观。机器的总重量为3750公斤。 拉法玛特KM4折页机技术参数 - 弯曲板条的工作宽度:2000 mm - 最大工件长度:1500 mm - 最大工件厚度:4 mm - 顶部和底部梁之间的最小卷曲钣金带长度:60 mm - 可弯曲钣金带最长长度:500 mm - 最小内弯曲半径:6 mm - 最小压接宽度:20 mm - 与弯曲钣金边缘的最小弯曲距离:25 mm - 顶梁提升范围(从弯曲梁枢轴 ...
机器类型:旋转折弯机 制造商: RAS 型号: 2003 M 条件:非常好 产品/服务类型:二手机器 规格: 容量: 2040 x 2.5 mm 驱动类型:el./mech。 推进功率: 0.75 kW 备注: 后挡料, 5 个额外的弯曲导轨 重量: 1800 kg 该机器状况良好,可以立即使用,我们可以查看和演 。 如果您对我们的报价感兴趣,我们将非常高兴。 错误、修改和事先销售除外
机器类型:旋转折弯机 制造商: RAS 型号: 61.1 建设年份:1965 条件:良好 报价类型: 二手机器 规格: 容量:1020 x 1.5 mm 驱动类型:手动 备注:背面有材料支撑 重量: 220 kg 该机器状况良好,可立即使用,我们可以查看和演示 如果您对我们的报价感兴趣,我们将非常高兴。 错误、修改和事先销售除外
供应信息 23317 规格: - 最大工作宽度 2040 mm - 最大材料厚度 40 kp / mm²,强度 3.5 mm - 弯曲角度调节 电子预选 0 - 135 - 最小弯曲半径 1.25 x 板材厚度 - 最小内侧高度 6 x 板材厚度 - 自动顺序控制,实现完整工作流程 - 通过手动或脚踏开关操作 - 上梁的最大开口宽度/行程 200 mm - 高度可调性 - 弯曲梁 80 mm - 下梁 80 mm - 上梁驱动 400 V / 1.1 kW - 折弯梁驱动 400 V / 1.5 kW - 手动后挡料可从正面操作 - 大约需要空间 宽 3300 x 高 1350 x 深 1500 mm - 重量约。 2600 千
板材宽度: 3200 mm 板厚: 2,50 mm 立柱间距:mm总功率要求:kW机器重量约:3,80 t机器尺寸约:m分段式上梁导轨可采用手动和自动折 模式 通过电位计调整弯曲角
Description: Technical details: Working width 2040 mm, sheet thickness 3.5 mm, stand width 2100 mm, sheet width 2040 mm, power 3.7 kwweight approx.: 2,300 kg, Approx. Onsite Dimension. (l x w x h): 3,350 x 1,350 x 1,350 mm
sheet width: 4000 mmplate thickness: 2,5 mmdistance between columns: 4060 mmControl: total power requirement: 3 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
弯曲长度: 3200 mm 板厚度: 4 毫米钢 重量: 约 5800 公斤 姆瓦阿格 电机控制的后挡板,带最大 1500 mm 的折叠凸轮 电动弯曲脸颊调节 控制多弯 9000 分段式上脸颊工具,带自动工具夹紧功能(高度 150 mm
折弯机 RAS 67.30 HR 钢厂建设 机器位置:76661菲利普斯堡 可以在现场查看机器。它工作得很好。 您可以随时安排看房预约。 我们很乐意听取您的意见