弯曲压力机

pressure: 175 tchamfer lenght: 3050 mmvoltage: 3x400 Vcontrol voltage: 24 kW: 80 Afrequency: 50 Hz: DNC 1200PS PressCad : 18,5 kWquantity of oil: 350 lheight of the machine: 3360 mmweight of the machine ca.: 12700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 170 tchamfer lenght: 4050 mmquantity of oil: 350 lcontrol voltage: 24 kWcontrol: CYBELEC ModEva 10S total power requirement: 27,5 kWweight of the machine ca.: 14800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 300 mmstroke: 240 mmdayligth: 640 mmquantity of oil: 250 l: total power requirement: kWweight of the machine ca.: 15,00 tdimensions of the machine ca.: m• Cybelec ModEva PAC touch screen control, retrofitted• Pilz safety barrier retrofitted• controlled axes: Y1, Y2, X, R• 6 stop fingers can be moved laterally• Pneumatic die displacement• Upper and lower tool clamping automatically• 2 support arms on linear guides• CNC controlled crowning• Tool package consisting of:• Lower tool V6, segmented• Punch straight H 192, length = 3050mmReplacement blades are not included. Can be ordered in differentradii.• Stamp offset H 220, length = 6x250mmDimensions: approx. L 4.05 x W 1.80 (plus support arms) x H 2.90 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 2250 mmthroat: 300 mmstroke: 240 mmdayligth: 640 mmquantity of oil: 250 lControl: total power requirement: kWweight of the machine ca.: 12,00 tdimensions of the machine ca.: 3,90 x 1,80 x 3,00 m• Control: Cybelec DNC 80 2D graphics• Upper tool clamping automatic• Lower tool clamping 90mm and 13mm• controlled axes: Y1, Y2, X1, X2, R, Z1, Z2• motorized crowning• 6 x V block die length 3,500, segmented:with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30°• Straight punch, H 350mm / approx. 70°, length 3060 mm, segmentedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力： 125 t倒角长度： 5050 mm 控制：Cybelec ModEva Y-rapid 行程：100 mm/s：10 mm/s：100 mm/s 油量：250 l

压力： 225 t弯曲长度： 6050 mm支架宽度： mm控制： CYBELEC DNC 1200 hp 总功率要求： 18.5 kW机器重量 约： t空间要求 约： m配件/设备：- 机器前面的 2 件弯曲辅助设备- 机器前面的 2 件支撑臂 控制 CYBELEC DNC 1200 hp请注意：本机是地板下机器为您服务机器租赁长达60 个月，无需首付，无残值，个人建议和根据要求计算� ��人租赁费率。该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

制造商： EHT Werkzeugmaschinen GmbH 型号： 250 - 60 建设年份：1998 工作长度： 6050 mm 压力：250吨 油量： 400 l 额定电流：52 A 主保险丝额定电流：80 A 主电机功率：22 kW 控制类型：DNC 74 PSG

压力： 300 t倒角长度： 3050 mm 油量： 400 L尺寸： 4550x3000x3700 mm重量： 19000 kg

压力：80吨倒角长度：-毫米立柱间距：-毫米控制：西 门子Sinamics G110总功率要求：kW机器重量（校准）：5500公斤机器尺 寸校准：m

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secreturn speed: 165 mm/secwork speed: 10 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90,0 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7,5 kWback stop - adjustable: 0 - 500 mmWeight: 4.320 kgrange L-W-H: 2.250x1.960x2.750 mm--------------------------Press brake with optional equipment installation height / Cylinderas well as increased bending beam velocities--------------------------Facilities:- DELEM - CNC ER 70 graphics controller- Motion control: Y1 - Y2 - X - R axes- Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws- Quick change punch holder AMADA Promecam- Rehfuss-top tool, ground version- Universal die block 60x60 mm with 4V in the die shoe- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- V ...

压力： 40 t倒角长度： 1270 mm 机器重量 ca.： 3250 kg机器尺寸 ca.： 2150x1650x2300 mm

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 190 mm/secwork speed: 12,0 mm/minwork stroke: 375 mmdayligth: 650 mmoil volume: 300 ltr.table height: 900 mmvoltage: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending speed: 10,9 mm/s Distance between columns: 3600 mm Table height: 900 mm Daylight: 960 mm serial number: 20,090,208, throat: 410 mm, Crowning : automatic, Max. pressing force: 175 to, Angle measuring system: Yes, bending length: 4,100 mm, number of controlled axes: 6, stroke: 700 mm, rare limit stop: 800 mm, stroke speed -forwards: 200 mm/min, stroke speed -return: 210 mm/min, table surface area l x w : 4100x90 mm, total power requirement: 15 kW, weight approx.: 16,050 kg, Approx. Onsite Dimension. (l x w x h): 6,250 x 6,250 x 4,050 mm

Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...

压力： 135 t倒角长度： 3060 mm重量： 8800 kg

pressure: 200 tchamfer lenght: 3000 mmdistance between columns: mmthroat: mmdistance between table / ram: mmstroke: mmfeed down: mm/secfeed bending: mm/secfeed up: mm/secengine output: kWweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3150 mmdistance between columns: 2600 mmControl: CYBELEC VisiTouch 19 2D dayligth: 525 mmstroke: 275 mmfeed down: 150 mm/secfeed bending: 0-10 mm/secfeed up: 120 mm/sectotal power requirement: 18,5 kWweight of the machine ca.: 15.600 kgdimensions of the machine ca.: 4250x2000x3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending length: 4050 mm Pressing force: 45 tweight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 2,000 mm

Description: Force: 30 tonnes Maximum working length: 2050 mmweight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 2,100 mm

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• manual back stop• upper and lower tools• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：135吨弯曲长度：3100毫米支架宽度：2600毫米支� �投影：400毫米行程长度 最大：200毫米行程 - x：800毫米 - 新机床 - 带EasyBend 2D Touch CNC控制，4个受控轴，全套工具，CNC控制的工作台轰炸 和移动DSP安全系统 有关确切的标准设备和可用选项的更多信息，请访问� ��们或直接致电我们 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理�

Description: 100 tonnes of power Total bending length 3200 mm Distance between uprights 2700 mm Gooseneck depth 400 mm Motor power 7.5 kW easyBEND 2D' digital control. 500 mm rear stop. 2 front supports. 4 Y1Y2 XR axes NC-controlled hydraulic bending New tooling lineweight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,650 x 2,540 mm

轴数 5 压力 kN 1000 工作长度 mm 2600 行程 mm 200 操作 mm/s 10 输送速度 mm/s 200 返回速度 mm/s 200 主机功率 kW 11.4 控制 BC 55 图形 安全菲斯勒光栅 辅料 各种折弯机 操作文档

pressure: 3 tchamfer lenght: 3600 mmdistance between columns: 3100 mmControl: CNC type: M9101 Controllertotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 260 tonnes of power Total bending length 4100 mm Distance between uprights 3150 mm Gooseneck depth 300 mm Apron travel 200 mm ATS 900 numerical control. 3 axes Y1 Y2 X. CNC controlled camber. dsp laser protection. Promecam' toolingweight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 4,270 x 1,750 x 3,000 mm

: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 130 mmthroat: 200 mmdayligth: 310 mmworking feed: 7,0 mm/secreturn speed: 50,0 mm/secControl: konv. work height max.: 905 mmtable width: 180 mmoil volume: 250 Litertotal power requirement: 7,5 kWweight: 7800 kgrange L-W-H: 3500 x 1700 x 2280 mmFurnishing:- simple / conventional electro-hydraulic press brake- swiveling operation, front left- electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display- manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers- Manual (jog mode) and automatic cycle selectable- split deer foot upper tool (segmented)- 2x reversible MULTI V die blocks- 1x freely movable foot control Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9308351The da ...

规格： 机器站在走廊上，不进入地板 - 印刷能力 400 t - 工作宽度 3100 mm - 支架之间的通道 2600 mm - 工作台宽度 300 mm - 投影 400 mm - 安装高度 500 mm - 滑枕行程 550 mm - 工作台高度 1000 mm - 驱动 400 V / 50 kW - 大约需要空间 宽 4100 x 高 3800 x 深 2200 mm - 称重机约。 24800 公斤 - 重量配件约 1000 公斤 -跟： - 旋转臂 – 用于压力机深度的控制面板 - 2007年更新的控制ATS 460 - 双手控制面板，脚踏开关， - 磨刀 2500 mm - V – 模具 2700 mm - 各种短折弯机工�

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmstroke: 130 mmdayligth: 325 mmthroat: 250 mmworking feed: 10,0 mm/secreturn speed: 100 mm/sectable width: 180 mmwork height max.: 865 mmControl: M 9101 oil volume: 225 Literengine output: 11,0 kWweight: 11.500 kgDimensions (LxWxH): 4270 x 1500 x 2530 mmFurnishing:- HACO / Robosoft NC control, model M 9101 controller- with external display / screen- pivoting control, front left- electric back gauge (X axis)- with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis)- hydraulic upper tool clamping- manual table crowning, adjustment with hand crank- segmented upper and lower tools- free-moving 2-hand control- free-moving footswitch- rear protective device (self-made)- User manual in German Machinevideo :https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.beThe data for this  ...

pressure: 400 tchamfer lenght: 4000 mmdistance between columns: 3500 mmControl: CNC type: BC 25 Graphicthroat: 400 mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

供应 22564 规格： - 印刷能力 150 t - 工作宽度 2600 mm - 立柱之间的通道 2100 mm - 工作台宽度 180 mm - 投影 250 mm - 安装高度 325 mm - 驱动 400 V / 7.5 kW - 空间要求约 宽 3000 x 高 2400 x 深 1600 mm - 重量约。 7000 公斤 - 含： - 带脚踏开关的双手控制面板

规格： - 印刷能力 150 t - 工作宽度 2600 mm - 支架之间的通道 2100 mm - 工作台宽度 180 mm - 投影 250 mm - 安装高度 325 mm - 驱动 400 V / 7.5 kW - 大约需要空间 宽 3000 x 高 2400 x 深 1600 mm - 约重 7000 公斤 -跟： - 带脚踏开关的双手控制面板

pressure: 260 tchamfer lenght: 3000 mmdistance between columns: mmupper beam stroke: 250 mmtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 3,40 x 1,90 x 3,45 m• Controlled axes: Y, X• Control: Haco type PB 2350• Pivoting control panel, left front• Free-moving dual footswitch• Tool package:Stamp straight, H 175mm, approx. R 1.54 V block die V 15.22, 35, 50 mmDie V 100, length = 4 x 835 mmDie V 80, length = 4 x 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力： 180 t色谱柱间距： 380 mm： 气缸： Überholt 工作宽度： 3100 mm机器重量： 约11.6 T

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmstroke of upper beam: 120 mmthroat: 250 mmdayligth: 325 mmworking feed: 7.0 mm/secreturn speed: 60.0 mm/sec: 300 barControl: ATL 550 work height max.: 915 mmtable width: 180 mmtotal power requirement: 7.5 kWweight: 8250 kgrange L-W-H: 3500 x 1700 x 2380 mmFurnishing:- simple NC controlled hydraulic press brake, including torsion shaft- including ATLANTIC NC control ATL 550 Positioning of the back gauge (X) Positioning of the depth adjustment (Y1+Y2) Possibility of programming various programs Storage capacity max. 200 programs - max. 400 sets Swivel control panel, front left- electro-motorized, stepless depth adjustment (Y1+Y2 axis)- electro-motorized back gauge (X axis) 2x manually adjustable stop fingers- manual table crowning, including analogue value display- 1x split upper tool set - HACO holder- 1x rotating MULT ...

pressure: 200 tchamfer lenght: 3600 mmdistance between columns: 3150 mmstroke of upper beam: 200 mmthroat: 300 mmdayligth: 450 mmworking feed: 9,0 mm/secreturn speed: 80,0 mm/sec: 265 barControl: konv. work height max.: 965 mmtotal power requirement: 15,0 kWweight: 12700 kgrange L-W-H: 3860 x 1750 x 2800 mmFurnishing:- simple / conventional electro-hydraulic press brake- swiveling operation, front left- electric, stepless depth adjustment (Y1+Y2 axis) Torsion shaft for parallelism- electric back stop (X axis) with handwheel for fine adjustment on ball screws 2x manually adjustable stop fingers- manual (jog mode) and automatic cycle selector switch- split deer foot upper tools- 2x universal V-die block, reversible- freely movable 2-hand/foot control- Operation manual Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9308361The data for this ad was create ...

压力 80 至 弯曲长度 2100 mm 带三点弯曲系统 . 安装高度 782 mm 工作行程 265 mm . 快速移动 150 mm 操作 10 mm 连接负载 13 kW 机器重量 7.8 至 . 跟 - 三点式折弯系统 - 液压工具夹紧 - 可移动运行 - SICK 光电传感器 - 6轴停止系统 - 很多工具 . .控制维修是必要的！详情请提供�

纸张宽度：。mm板厚： . mm柱间距： . mm压力：t倒角长度：mm总功率要求：kW机器重量 ca.： 10 t机器尺寸 ca.： m

pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力： 300 t倒角长度： 4100 mm立柱间距： 3550 mm机器编号： 5083 机器重量 大约： 24.000 kg新控制器：DNC 884sPS国产设备：- CNC控制X轴和R轴 - CNC控制冠 - 液压印章夹紧 - 菲斯勒安全光�

Description: maximum pressing force 175 t, maximum stroke 300 mm, throat 300 mm, ram distance 700 mm, working length 2050 mmweight approx.: 12,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 2,200 x 3,300 mm

Description: working length: 2500 mm max. pressing force: 80 t manually adjusts the limiter possibility of adjusting the left and right sides by height no documentation  , please also have a look at the video of this machine Max. pressing force: 80 to, bending length: 2,500 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,600 x 1,650 mm

serial number: 2,977, Max. pressing force: 60 to, bending length: 1,600 mm, stroke: 60 mm, weight approx.: 2,400 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 2,100 mm

pressure: 200 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 200 mmajustment speed: 100 mm/secworking feed: 8,0 mm/secreturn speed: 120 mm/secstroke: 190 mmtable height: 900 mmdayligth: 350 mmengine output: 15,0 kWoil volume: 150 ltr.Control: ELGO weight of the machine ca.: 13500 kg.range L-W-H: 4800 x 1750 x 2800 mmFurnishing:- simple / electro-hydraulic NC press brake- with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis)- swiveling operation, front left- electro-motorized back gauge - X axis- electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft- front support arms- continuous adjustment of the pressure force (upper beam)- 1x universal matrix block, reversible- 1x set of split deer foot upper tool- 1x freely movable 2 hand/foot control Machine link:htt ...

特殊型号：对接翻盖标配 2 个额外的止动手指 / • 消除应力的焊接钢结构 •带扭力轴的上梁 •带触摸屏HMI的NC控制 • X 轴和 R 轴的后挡料 •欧式上部工�

pressure: 185 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 500 mm: 300 mmdayligth: 500 mmwork height max.: 950 mmworking feed: 0-10 mm/secreturn speed: 140 mm/secengine output: 18,5 kWcontrol: DELEM DA-66T weight of the machine ca.: 15000 kgdimensions of the machine ca.: 4000x2600x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 4000 mmdistance between columns: 3100 mmControl: CYBELEC DNC15 stroke: 200 mmthroat: 260 mmworking feed: 6,9 mm/secreturn speed: 51,0 mm/sectable height: 900 mmtable width: 220 mmtotal power requirement: 18 kWweight of the machine ca.: 18000 kgdimensions of the machine ca.: 4500 x 2100 x 3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

规格： - 工作长度 3500 mm - 支架通道 3050 mm - 最大压力 2000 kN - 距离表/最大柱塞 480 毫米 - 支架投影 260 mm - 公羊行程约 300 毫米 - 提升速度 - 降速怠速最大值 100毫米/秒 - 升压速度 80 毫米/秒 - 最大向下压紧速度 10 毫米/秒 - 总驱动功率 25 kW - 大约需要空间 宽 4500 x 高 3150 x 深 2100 mm - 约重 16000公斤 -跟： - CNC控制CYBELEC于2008年更新 - 受控加冕装置 - 带高度调节的受控后挡料 5 - 1000 mm - 水力。刀具夹紧 - 上模+万能模具 - 材料要求 - 双手控制面�

Description: 100 tonnes of power Total bending length 3,050 mm Space between uprights 2550 mm Gooseneck depth 250 mm Programmable stroke 175 mm Approximate tank capacity 80 litres ELGO programmer Manual gauge 500 mm long AMADA/PROMECAM split tool line Serial number: 10933weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,180 x 2,940 mm