二手 TRAUB 出售

-Automatic lathe, single-spindle automatic lathe; -Workpiece diameter max 15 mm; -Turning length: 70 mm.

Machine is in good condition Max bar diameter mm. 36 Spindle speed rpm / min 6300 Machine is in good condition

TRAUB TND 400 CNC Lathe, used - machine no.: 192 - operating voltage: 380 V - frequency: 50 Hz - control voltage: 22 V - valve voltage: 24 V - coupling voltage: 24 V - total nominal current: 102 A - total connected load: 48 kW - read off operating hours: 48739 - control system: TRAUB SYSTEM TX 8F - spindle passage: 65 mm - clamping chuck diameter: 200/250 mm - turning diameter over cross slide: 240 mm - turning diameter over bed: 480/170 - turning length: 800 mm - tool holders in turret: 12 pieces for cylinder shaft 40 x 63 mm - slide travel cross: 220 mm - slide travel length: 850 mm - rapid traverse cross: 10000 mm/min - rapid traverse longitudinal: 20000 mm/min - speed at drive wheel: 4000 rpm - ttailstock quill diameter: 85 mm - quill stroke: 140 mm - holder MK5 - press force of quill at 20/60 bar: 3300 N/10000 N - the machine is equipped with one tailstock, ...

Feeder lathe Traub Tnl 32G + FMB turbo 5-42 The machine is from 1996. The machine tool has two eight-tool turrets, including one fixed and one torsion (B axis). Both heads have all driven sockets. The lathe is equipped with a spindle with a support sleeve, a counter spindle and a part gripper. A belt chip conveyor is built into it. The feeder feeds bars in the diameter range from 5mm to 42mm with a maximum length of 3m Main parameters: Spindle: 32mm bore Speed ​​max.6000 rpm Power=11kW Revolver 1: X = 60mm Z = 320mm Power = 1.5kW Revolver 2: X = 180mm Z = 1200mm B=0-90 degrees Power = 1.5kW counter spindle: Z = 800mm Speed ​​max.6000 rpm Power = 4.4kW In addition, tool holders are included with the machine.

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: TRAUB SYSTEM TX 8i-p Operating hours: 46441 Technical data Number of axis total: 7 Number of spindles: 2 Turning length: 180 mm Number of axis total Max. bar diameter: 20 mm Spindle speeds: stepless up to: 8000 rpm Longitudinal travel (Z-axis): 205 mm C axis (spindle,resolution): 0.001 ° Back spindle: up to: 6400 rpm C axis (spindle,resolution): 0.001 ° Turret slide: number: 2 Upper turret head: number of tools: 8 number of driven tools: 8 Spindle speeds (turning tools): 12000 rpm X axis: 120 mm Lower turret head: number of tools: 7 number of driven tools: 7 Spindle speeds (turning tools): 6400 rpm X axis: 120 mm Z axis: 250 mm Y axis: -20 / +40 mm Counter-operation: number of tools: 7 number of driven tools: 3 Voltage 50 Hz 3x: 400 V ...

Technical data Max. work piece diameter: 15 mm Turning length: 70 mm Spindle hole: 15 mm Max. treading diameter: 8 M (Metric) Production capacity: 28 - 2100 pce/h Spindle speeds: Number of spindle speeds: 12 from: 900 rpm up to: 6500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Pick-up attachment Gripper device Vertical support Bar loader number of bars: TRAUB Type: B3000 Length of bars max.: 3200 mm Slotting attachment Drilling tailstock Workpiece counter Protective cover

Turning diameter: 175 mm Turning length: 650 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 12   CNC Brand: Traub CNC Model: TX8i-S X-Axis:          175mm Y-Axis:          40mm Z-Axis:          650mm Spindle bore:    65mm Speedrange:      5000Rpm Spindle power:   24kW Subspindle speeds:7000Rpm Subspindle bore: 42mm Subspindle power:28kW Length:          6.500 mm  Width:           2.400 mm  Height:          2.400 mm  Weight:          10.000 kg  Upper left turret: Positions 10 Driven station 10 X/Z Stroke 175 / 650 Y Stroke 40 Vdi 30 Speeds 6000 Rpm Lower right turret Positions 10 Driven station 10 X/Z S ...