二手 PEDDINGHAUS 出售

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 65/80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -max bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: Pin-controlled, two-speed, each with pins for left/right to set the angle -Equipment: adjustable counterholder strips, standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 50 mm -Dimensions: 200/120/H80 mm -Weight: 5.6 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg

Bench vise, locksmith vise, parallel vise -Jaw width: 150 mm -Span width: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124603 144876 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x Dimensions: 270/200/H47 mm -Weight: 5.5 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Counter bearing: for shear tool -Type: 441215124903 -1x dimensions: 270/200/H47 mm -Weight: 5.5 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-way combined model 210 SUPER 11 -Pressure force: 40 tons -Drive power: 3/2.2 kW 2800/1400 rpm -Applications: punching, shearing, cutting, notching -Footswitch: 2 -Length stop: Electric contact stop, adjustable up to approx. 1 m -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1620/1350/H1740 mm -Weight: 1323 kg

Hand lever shears, long knife, sheet metal and round steel shears -Peddinghau: s 4R/7, long knife, sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance specification for: material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Peddinghaus, profile steel scissors 5-fold combined model 210/13 on a rotating machine base -Pressure force: 70 tons -Drive power: 4/5 kW 1450/2900 rpm -Throat: 610 mm -Applications: punching, shearing, cutting, notching -Accessories: incl. various. Stamps and dies see photos -Dimensions: 1865/1205/H1990 mm -Weight: 3580 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square -Dimensions: 170/145/H235 mm -Weight: 14 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 97 mm -Dimensions: 220/335/H115 mm -Weight: 32 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/317/H115 mm -Weight: 32 kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Hand lever snips, long blade tin and round steel snips, tin snips -Manufacturer: Peddinghaus sheet metal and round steel shears type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Knife length: 150 mm -Lever arm with: safety spring -Number: 2x lever scissors available -Price per piece -Dimensions: 275/100/H1180 mm / 280/100/H934 -Weight: 11 kg/pc.

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -hold-down: -Total dimensions: 480/210/H1360 mm -Transport dimension: 1070/210/H470 mm -Weight: 41 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 240mm -Dimensions: 490/325/H200 mm -Weight: 26 kg/pc.

Hand lever snips, lever scissors, long knife sheet metal and round steel snips, sheet metal snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -hold-down: -Total dimensions: 295/125/H865 mm -Transport dimension: 690/125/H310 mm -Weight: 11 kg

Hand lever snips, lever scissors, long knife sheet metal and round steel snips, sheet metal snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3 BR 6 -Steel sheet: up to 6 mm -Round steel: up to 13 mm -hold-down: -Total dimensions: 1175/150/H410 mm -Weight: 24 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 ton. -Punching performance: see photo nameplate -Projection: 360 mm -Accessories: incl. punching tool and 2nd table, see photos -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3R 5 -Steel sheet: up to 5 mm -Round steel: up to 13 mm -Total dimensions: 500/150/H1025 mm -Transport dimension: 850/150/H370 mm -Weight: 22kg

圆棒钢： 25 毫米 方边钢： 22 毫米 L 型梁： 70 x 7 毫米 切割能力： 100 x 10 毫米 板厚度： 10 毫米 总功率要求： 1，3 kW 机器的重量 ca.： 0，6 t 机器的尺寸校准： 1，1 x 0，65 x 1，5 m

压力：100 t 冲孔横截面（qmm）： -- 行程： 100 mm 投影： 510 mm 工作高度： 1100 mm 冲孔： 31 直径，25 mm U - 钢 - 法兰： 100-400 mm I - 钢 - 法兰： 80-400 mm U - 钢 - 腹板： 100-400 mm I - 钢 - 腹板： 100-550 mm 冲孔行程： 20 mm 行程： 60 p.min 板材厚度最大值： 用于空气弯曲： 10 mm 总功率要求： 7.5 kW 机器重量 约： 2.4 t 空间要求 约： 1.7 x 0.9 x 2.3 m 电气 380 伏： 各种印章和模具： 脚踏开关： 机器脚： 这是一台二手机器， 所以我们的销售 不包括任何保修。 仓库管理员，展厅面积为2500平方米。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

pressure: 300 t square measurement: . mm diameter: . mm total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

压力：110 t 冲孔横截面 qmm： 行程： mm 总功率要求： kW 机器重量 约： t 空间要求 约： m 最大冲孔力： 1100 kn 最大剪切力： 1700 kN 冲孔外展： 510 mm 冲孔 31 in 25 mm 扁钢： 500 x 22 mm 扁平钢的 液压压紧板 本 广告的数据是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理。

圆钢：50毫米 方钢：40 x 40毫米 角钢：140 x 13毫米 冲孔力：900千牛 冲头：投影：510毫米 冲床：克.行程长度：29毫米 冲床：容量（直径x厚度）：31 x 20毫米 切口装置：长T钢：80 x 14毫米 冲程率：40 / 45冲程/分钟 总功率要求：4千瓦 机器重量约：3.7吨 尺寸L x W x H： 2.1 x 0.7 x 2.12 m 配件：各种邮票和矩阵 数据 fü，此广告是用 ModulMWS 创建的 - LogoTech oHG 的机器管理。

： Ja ： Stanzkraft 800 kN 频率：50 Hz 电流：17/11 A 电压：220/380 V 圆棒钢：32-17 mm 方边钢：30-18 mm ：100 x 10 mm 扁钢：350 x 16 mm 喉部：200 mm 最大工作高度：1107 mm 总功率要求：4 kW 机器重量 ca.： 1,5 t 机器尺寸 ca.： 1200 x 700 x 1850 毫米

伏特：380 V 重量：1,4 t：

机器重量 CA.： 1,2 t 序列号： 422A045 ： ja

圆钢：63毫米 方钢：55毫米 扁平钢：100 x 25毫米 建造年份约为 规格： 电机：380 V，6.3 kW 重量：约2，450千克 这是一把剪刀，用于切断拉拔器 的数据fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。