型号
(生产厂家: KAESER)
凯撒 CSDX 165 不锈钢板块 T 二手机器 最大功率: 90 kW 容积流量: 3,84 - 15,84 米/分钟 压力: 8,5 巴 2012 出厂年
凯撒干燥机 TI901 NR 1004 刺。 凯撒 TI901型 信噪比 1004 2005年 功率(千瓦) 11.5 效率。(m3/min) 90 压力(巴) 16
凯撒制造 型空心SK22T S/N 2324 2012年 功率(千瓦) 11 花费。(m3/分钟) 1.85 压力(巴) 8 逆变器 否 呵呵。除湿机 是 交换器编号 冷却(战俘/水)空气 在油箱上 是 350 L
刺。 凯撒 典型 ASD47 证监会 S/N 3068 2013年 功率(千瓦) 25 效率(m3/min) 1.07-5.27 压力(巴) 8,5 逆变器是 交换器 是
刺。 凯撒 典型DSDX 302 信噪比 1600 韩国 2011 分子量 (千瓦) 160 怀达吉。(m3/分钟) 30.20 独联体(巴) 8.5
刺。 凯撒 典型 CSD122 证监会 S/N 5189 韩国 2011 机动比旭 (千瓦) 75 怀达吉。(m3/min) 2,20 -10,50 独联体(巴) 8,5
刺。 凯撒 型号 ASD50 T 证监会 S/N 1442 2014年 功率(千瓦) 25 输出(m3/分钟) 1.07-5.27 独联体(巴) 8.5 HRS (DOC/一般) 12822/15055 波浪是的 建立。烘干机
出售凯撒压缩机 品牌:DSDX 302 SFC 类型 : DSDX.1C 最大 : 12,0 巴 RBM: 1500 rpm V: 400 千瓦: 160,0 重量: 量: 建造年份:2009年
制造商: Kaeser, 类型: AS 35, 年份: 1993, 施劳本科压缩机: 是, 工作时间: 44000, 容积流量 m³/min: 约 3,0, 安特里布斯莱斯通 千瓦 1: 22, 容积流量 m³/h: 3,3, 年份 :1993
制造商: 凯撒真空站, 类型: BSV 100, 年份: 2006, 索格弗莫根 立方米/小时: 1,0 巴, 转数 rpm: 3000, 工作时间: 76281, 主旋翼转数 U/min: 3000, 年份 :2006
Description: 3x Bekomat incl. 1X floor mounting bracket and connection cable Type 1 x water separator with Bekomat Type 1 filter combination FF 10 and FG 10 with new filter cartridges Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 12 kg
Description: Kaeser AIRBOX CENTRE 550 with integrated air dryer and air receiver rated power: 3 kW air flow: 255 l/m working hours: 2811,2533 under load max.working pressure : 10 bars piston pump replace with brand new one in 2021! Kaeser C-Service on 06.10.2022. regulary maintained service manual: unavailable The innovative AIRBOX and AIRBOX CENTER The AIRBOX and all-in-one AIRBOX CENTER – which features an integrated compressed air receiver, refrigera tion dryer and optional filter equipment – are delivered with a control cabinet and ready for immediate operation. The use of energy-saving IE3 motors makes compressed air generation particularly efficient Oil-free compressed air This results in the following advantages for special ap plications: the compressed air quality corresponds to the quality of the intake air. No contamination is caused by the compression process. This ena ...
Description: Emulsion splitting system, oil-water separation system The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water fulfils the legal regulations for sewer discharge. Approx. Onsite Dimension. (l x w x h): 590 x 590 x 1,170 mm, weight approx.: 58 kg
Description: Nennleistung: 22kW year of manufacture: 1,995, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,000 x 1,300 mm, weight approx.: 800 kg
Description: with dryer ABT105 Refrigerant R 134 A quantity 1.45 kg model: CSD 105 T, suction capacity: 55 kW, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,000 x 1,900 mm, weight approx.: 1,600 kg
Description: operating hours 7.852 b/h Load hours 3,572 b/h Next service in 2,530 b/h Connection cable ,included  , driving power to: 7,5 kW, flow rate: 1.010 l/min, operating pressure: max. 8 bar, modelname / number: 2,483, year of manufacture: 2,010, Approx. Onsite Dimension. (l x w x h): 800 x 650 x 1,100 mm, weight approx.: 210 kg
Description: Serial number: 1273 Connection: 18.5 kW Operating pressure: 11 bar Temperature: 3 - 45°C Speed: 2950 rpm Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,200 mm, weight approx.: 450 kg
Description: max. pressure 7.5 bar Power consumption 15 kW Delivery rate 2,400 l/min Operating hours B/h Load hours B/h Electronic and emergency stop switch defective with main switch Approx. Onsite Dimension. (l x w x h): 830 x 780 x 1,020 mm, weight approx.: 320 kg
Description: Consisting of an SK 19 screw compressor, a compressed air tank with a volume of 500 l, a KT 03 oil separator and a TB 19 refrigeration dryer Approx. Onsite Dimension. (l x w x h): 3,000 x 200 x 1,900 mm, weight approx.: 700 kg
Description: Serial number: 2043 Rated power: 22.0 kW Motor speed: 2960 rpm Max. operating overpressure: 11 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 900 x 1,500 mm, weight approx.: 500 kg
Description: Serial number 3297 max. operating pressure 16 bar Approx. Onsite Dimension. (l x w x h): 750 x 600 x 1,000 mm, weight approx.: 200 kg
Description: Serial number 1008 Nominal power 0.9 kW Motor 2955 rpm max. operating overpressure 11 bar Ambient temperature 3° to 45° C Approx. Onsite Dimension. (l x w x h): 700 x 600 x 1,200 mm, weight approx.: 300 kg
Description: KAESER TB 19 Cycling Refrigerated Air Dryer flow rate (m3/min): 2,10 pressure loss, refrigeration dryer (bar): 0,19 elect. power consumption at 100% flow rate (kW): 0,43 elect. power consumption at 50% flow rate (kW): 0,24 compressed air connection (G): 1 condensate drain connection (G): 1⁄4 electrical supply : 230 V/1 Ph/50 Hz Other features : Floating contacts: refrigerant compressor running, high pressure dew point The Kaeser cycling control provides maximum efficiency by operating the refrigerant compressor only when necessary. This is achieved by utilizing a thermal storage medium. The refrigerant system cools the medium to a certain temperature, cuts off and then stands by until the temperature rises to a predetermined level before switching on again. Therefore, the dryer is not wasting energy when the demand is low. A non-cycling dryer continuous to op ...
Description: KAESER ASD 37 SFC with Inverter Drive  , rated power: 22 kW air flow: 3700 l/m working hours: approx. 20000 hrs, 18000 hrs. under load time left to regular maintenance: approx. 3000 hrs. max.working pressure: 8.5 bar equipped with 1 RFID user card! regulary maintained service manual: unavailable  , ASD – Multiple savings zhe newly improved ASD systems save energy in a number of ways: equipped with further-refined SIGMA PRO FILE rotors, the airends are controlled and monitored by the industrial PC-based SIGMA CONTROL 2 compressor controller. This advanced controller matches compressed air delivery to actual air demand and keeps costly idling time to an absolute minimum, thanks to its dynamic control mode save energy with the SIGMA PROFILE at the heart of every ASD system lies a premium-quality airend featuring Kaeser’s SIGMA PROFILE rotors flow ...
Description: KAESER ASK 34 SFC with Inverter Drive and Heat Recovery Option  , rated power: 18.5 kW air flow: 3600 l/m working hours: approx. 15948 hrs., 12845 hrs. under load max. working pressure: ,8 bar regulary maintained equipped with 1 RFID user card! service manual: unavailable  , integrated SFC control cabinet housed in its own integrated yet insulated control cabinet the SFC frequency converter is shielded from heat arising from the compressor a separate fan keeps operating tem peratures in the optimum range, so as to ensure maximum performance and service life SIGMA CONTROL 2 traffic light” LED indicators show operating status at a glance, plain text display, 30 selectable languages, soft-touch keys with icons, fully automatic monitoring and control selection of Dual, Quadro, Vario and Continuous control as standard ethernet interface for connec ...
Description: max. working pressure: 10 ,bars rated ,power: 5,5 kW working hours total: approx. 1492 hrs working hours under load: approx. 531 hrs time left till maintenance: approx. 1508 hrs Please note: compressors are delivered free of liquids, media, oils and fluids inside! suction capacity: 5.5 kW, operating pressure: 10 bar, modelname / number: AIRCENTER SM 10, year of manufacture: 2,022, Approx. Onsite Dimension. (l x w x h): 630 x 594 x 1,716 mm, weight approx.: 410 kg
Description: Refrigeration system: Refrigerant R404/A Capacity 15.8 kg Ts= -10 to + 125 °C Ps= 35 bar HP Ps= 20 bar LP Air system: Ts= -10 to + 60 °C Ps= 16 bar Approx. Onsite Dimension. (l x w x h): 1,400 x 1,350 x 2,250 mm, weight approx.: 610 kg
Description: rated power: 30 kW air flow: 5700 l/m working hours: approx. 15917 hrs. working hours under load: approx. 13771 hrs. max.working pressure : 8 bars time left to regular maintenance : 3000 hours regulary maintained service manual: not available Please note: compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 5700 l/m, suction capacity: 30 kW, operating pressure: 8 bars, modelname / number: ASD 57 T, year of manufacture: 2,005, Approx. Onsite Dimension. (l x w x h): 1,850 x 921 x 1,505 mm, weight approx.: 745 kg
Description: serial number: 1.9970.10020 pressure: 7 bar Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,600 mm, weight approx.: 700 kg
Description: rated power: 11 kW air flow: 2100 l/min. working hours: approx. 35000 h max. working pressure: 10 bars time left to regular maintenance: 666 Hours regulary maintained  , SK – series: Energy-efficiency: the essential requirement initial investment and servicing costs account for only a small part of a compressor’s total life-cycle costs. It is energy that accounts for the lion’s share of those costs. For more than 40 years, KAESER has been committed to minimising your energy costs for compressed air production. We also have the bigger picture in clear focus when it comes to servicing and maintenance costs, as well as maximum compressed air availability quiet and powerful, durable and secure!  , please also have a look at the video of ,this machine Please note: compressors are delivered free of liquids, media, oils and fluids inside!  , fl ...
Description: rated power: 5,5 kW air flow: 800 l/min. working hours: 19742 in total working hours under load: 17808 max.working pressure : 11 bars time left to regular maintenance : 3000 Hours Kaeser equipment RFID card  , please also have a look at the video of ,this compressor Please note: compressors are delivered free of liquids, media, oils and fluids inside! flow rate: 800 l/min., operating pressure: 11 bar, modelname / number: SX 8, year of manufacture: 2,018, Approx. Onsite Dimension. (l x w x h): 590 x 632 x 970 mm, weight approx.: 155 kg
Description: Serial number: 1311 Operating pressure: 18 bar Operating voltage: 230 V Frequency: 50 Hz Rated current: 4.8 A Refrigerant: R134A Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,400 mm, weight approx.: 300 kg
Description: Machine number: 326125 Operating voltage: 10 bar Power: 18.5 kW Volume flow: 2.6 m³/min Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 300 kg
Description: Serial number: 44845 Operating voltage: 230 V Frequency: 50 Hz Rated current: 5.7 A Operating pressure: 25 bar Refrigerant: R 22 Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,100 mm, weight approx.: 200 kg
Description: serial number: 4987 max.working pressure: 8 bars rated power: 3 kW air flow: 400 l/m working hours: approx. 2952 hrs. in total working hours under load: approx. 2143 hrs. time left to regular maintenance: approx. 3000 hrs. Kaeser Equipment RFID card  , please also have a look at the video of this compressor Energy-saving performance The efficiency of a machine depends on the total costs incurred throughout the equipment’s entire service life. With compressors, energy costs account for the lion’s share of total expenditure. KAESER therefore designed its SX series compressors with optimum energy efficiency in mind. Refinements to the energy-saving SIGMA PROFILE airend rotors and the use of premium efficiency IE3 motors have significantly contributed to the increased perfor mance of these versatile compressors. The addition of the SIGMA CONTROL 2 internal ...
Description: Screw Compressor Serial number 1330 Pressure 7.5bar Motor 5.5 kW Speed 3000 r.p.m. Working hours according counter 32136 h CE available Approx. Onsite Dimension. (l x w x h): 600 x 850 x 1,300 mm, weight approx.: 170 kg
Description: Rated power: 110 kilowatts , Nominal speed 1485 rpm , Operating pressure: 7.5 bar Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 1,800 mm, weight approx.: 1,800 kg
Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations
Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil / water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 500 x 1000 mm -Weight: 50 kg
Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg
Piston compressor, air compressor, air compressor, air compressor -Manufacturer: Berko, compressor type AB 501 with compressed air tank -Volume flow: max. 350 l/min -Pressure: max. 10 bar -Motor: 3kw -Tank capacity: 250 l -Price/delivery: complete -Transport dimensions: 1200/800/H1530 mm -Total weight: 300 kg
feed pressure: 11 bar liter capacity: 1,2 m³/min total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
There are two identical screw compressors available, operating pressure: 7.5bar, max. pressure: 8bar, volume flow: 0,82-2,57m³/min, width: 750mm, length: 895mm, height: 1260mm, weight: 337kg, were completely overhauled and always serviced.
Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.