二手 INDEX 出售

主轴通道：34 mm 转弯长度：. mm 钻孔深度：. mm 控制：指数 类型：S 3 驱动工具： 棒材装载机：Sameca 总功率要求：kW 机器重量约：t 空间要求约：m 刀具破损监控 拣选 站 背面加工 关于我们 仓库 中的500多台机器 超过8500 m² 存储面积，起重机容量70吨 以上 1000个项目 为您的车间 提供的配件如果您想销售 机器生产线或您的公司，请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

车削直径：440 mm 车削长度：1500 mm 控制：C 200 换刀装置：16 三爪卡盘 Forckrath：500 mm 总功率要求：kW 机器重量约：t 空间要求约：m 机器有很多附件，可以选择 购买技术数据是制造商或操作员的规格，因此对我们� ��有任何约束力。 我们保留进行事先销售的权利，我们的业务 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域，起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司， 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

主轴通道： 60 mm 横向滑块： 4 刀塔头： 6 pos. 螺纹切割装置： 总功率要求：kW 机器重量约：t 空间要求约：m 关于我们 仓库 中超过500台机器超过8500平方米的存储区域，起重机容 量70吨 超过1000项为您的车间 配件如果您想出售机器生产线或您的公司， 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

turning diameter: 200 mm turning length: 400 mm control: Siemens type: C 200-4 840 C spindle passage: 65 mm Tool changer: 2 x14 Pos. Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm Tool changer: 14 Pos live tooling: turning speeds: 25-4000 U/min transmission ratio: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 360 mm control: Siemens S3 T swing diameter: 370 mm tail stock: Tool changer: 14 Pos total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 80 mm turning length: . mm control: Siemens C 200 tool change unit: 14 live tooling: swing diameter: 130 mm spindle passage: 42 mm turret head: 2 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

主轴通道：25 mm 速度：5750 rpm 支持：4 长车削装置 - 工作距离：. mm 转塔头：8 螺纹切割装置： 棒材装载机：LNZ 水力杆 总功率要求：kW 机器重量约：t 空间要求 约：m 零件捕捉器 关于我们 仓库 中 超过500台机器 超过8500 m² 存储面积，起重机容量70吨 以上 1000件为您的车间 提供的配件如果您想销售 机器生产线或您的公司，请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

主轴通道：25 mm 速度：5750 rpm 支撑：4 刀塔头：8 螺纹切割装置：棒材装载机： LNZ 水力棒 类型：6.30HS-4.4 总功率要求：kW 机器重量约： t 空间要求 约： m 零件捕获器 关于我们 仓库 中超过 500 台机器 存储面积超过 8500 m² 存储区域，起重机容量 70 吨 以上 1000 个项目 为您的车间 提供配件 您想销售机器 生产线或您的公司， 然后与我们交谈。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

turning diameter: 400 mm turning length: 1250 mm control: Siemens type: 840C swing diameter: 590 mm number of spindle speeds: 3500 U/min Torque: 275/178 Nm spindle passage: 90/65 mm : 250 mm output: 43/28 kw Tool changer: 80 St. tool taper: Capto C 4 Turret 12-fold, 12 stations: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

车削直径： 520 mm 回转直径： 420 mm 车削高度： 200 mm 控制：西门子 总功率要求：kW 机器重量 CA.： 3，8 t 机器尺寸：M

车削直径：60 mm 车削长度：200 mm 滑块数量： 总功率要求：20 kW 机床重量约：t 空间要求约：m 孔径 30 mm，控制索引 C 200，主轴转速 7，500 rpm， 后部加工，3 爪卡盘，驱动工具， 工件装载机 WHU 80 数据 fü，此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机床管理。

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing an ...

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 710 mm control: SIEMENS SINUMERIC 840 total power requirement: 40 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly a ...

turning diameter: ca. 175 mm turning length: 400 mm control: SIEMENS, SINUMERIK 810 material diameter: round: 42 mm swing diameter: 370 mm x-travel: 150 mm z-travel: 400 mm spindle turning speed range: 31,5 - 5000 U/min max. torque on the spindle: max. 243 Nm feed power X/Z axis: 5.000 / 10.000 N rapid traverse: 7 m/min tool turret: 14 Pos. total power requirement: 24 kW weight of the machine ca.: 3,6 t dimensions of machine L x W x H: 2,6 x 2,02 x 1,86 m dimensions of the machine ca.: m Accessories: 3-jaw chuck FORKARDT 160 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: ca. 175 mm turning length: 400 mm control: SIEMENS, SINUMERIK 810 material diameter: round: 65 mm swing diameter: 370 mm x-travel: 150 mm z-travel: 400 mm spindle turning speed range: 25 - 4000 U/min max. torque on the spindle: 305 Nm feed power X/Z axis: 5.000 / 10.000 N rapid traverse: 7 m/min tool turret: 14 Pos. tailstock quill diameter: 55 mm tailstock quill stroke: 60 mm total power requirement: 24 kW weight of the machine ca.: 3,6 t Accessories: collet fixture, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 6 spindle passage: 27 mm turning length: 59 mm hexagon material: 24 mm square material: 18 mm cross slide travel: 36 mm longitudinal slide travel: 85 mm spindle turning speed range: 366 - 5020 U/min max. torque: 95 Nm control: INDEX total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 65 mm turning length: 150 mm control: Fanuc 32i-B Number of working hours: 11028 h chuck diameter: 250 mm turning speeds: 4000 U/min turret (x-stations): 14 VDI 30 Number of axles: 3 (X-Y-Z) St. turret (x-stations): 7 VDI 30 Number of axles: 2 (X-Z) St. c-axis: 0,001 ° y-Axis min./max.: +/-75 mm chip conveyor: Knoll 400 S-1/335 Bj. 2013 total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,7 x 1,72 x 2,16 m driven tools: 7 Handling system: FMB Unirobot M-10iA 12-7P Bj. 2017 CNC universal lathe INDEX IT600, year of manufacture 2014 - The following accessories would be supplied: o 2-jaw chuck Schunk ROTA 2B 200 o approx. 40 sets of clamping jaws o Approx. 45 tool holders (1x driven), but without cutting tool holder/ cutting tool o Compact handling system FMB unirobot M-10iA-12-7P o 12x 7 pallets each for various blanks - The b ...

turning diameter: ca. 175 mm turning length: 400 mm control: SIEMENS, SINUMERIK 810 material diameter: round: 42 mm swing diameter: 370 mm x-travel: 150 mm z-travel: 400 mm spindle turning speed range: 31,5 - 5000 U/min max. torque on the spindle: max. 243 Nm feed power X/Z axis: 5.000 / 10.000 N rapid traverse: 7 m/min tool turret: 14 Pos. total power requirement: 24 kW weight of the machine ca.: 3,6 t dimensions of machine L x W x H: 2,6 x 2,02 x 1,86 m Accessories: 3-jaw chuck FORKARDT 180 mmø, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-travel: 310mm, z-travel: 870mm, resolution C-travel: 0.001°, turning diameter: 250mm, main spindle speed: 20-4000/min, max. swing: 540mm, number of tool positions: 16, max. chuck diameter: 315mm, turning length: 820mm, work spindle passage: 65mm, control: Siemens Sinumerik 840C, length: 4100mm, width: 2000mm, height: 2200mm, weight: 5.5t, operating hours unknown, with driven tools, chip conveyor, control cabinet, frame, cooling lubricant system and documentation, has been regularly maintained, inspection is possible.

Length: 2700mm, width: 1900mm, height: 1900mm, weight: 2.5t, with Bar Loader FMB Turbo 8-80/320/A, year of construction: 2007, Chip Conveyor Knoll, documentation and Extraction Sartorius, was maintained regularly.

Including chip conveyor.

There are three identical machines available, two machine have a Bar Loader SAMECA MONOSAM 65 each, including documentation, various accessories and spare parts, were maintained regularly.

Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.

Controls: Siemens C200-4 D, has been regularly serviced, with documentation and accessories, the machine can be inspected on site.

X-travel: 520mm, z-travel: 200mm, circumferential diameter: 325mm, spindle bore: 60mm, rapid traverse: 30m/min, number of tool positions: 25, control: Index C200-4, including three-jaw chuck, pallet circulation system, coolant tank, scraper belt conveyor, tool holder and documentation, on-site inspection is possible.

Max. turning diameter: 200mm, max. turning length: 400mm, spindle speed: 6000rpm, bar capacity: 42mm, weight: approx. 4300kg.

Max. speed range: 5000 rpm, bar capacity: 65 mm, max. turning diameter: 200 mm, max. turning length: 400 mm. Number of spindles: 2, tool changer: 2x 14, Siemens control. Including outfeed conveyor, KNOLL 400S-1 chip conveyor (year of manufacture: 2016), switch cabinet with cooling unit, CO2 extinguishing system and INDEX bar loader. General overhaul in 2016.

This INDEX G200 YB Ratioline Lathe was manufactured in 1995 and completely retrofitted in the year 2016. It is equipped with a SIEMENS SINUMERIK 840 C control unit.

This INDEX G200 Compact Lathe was manufactured in the year 2003 in Germany. It is equipped with a SIEMENS SINUMERIK control unit.

This INDEX MS 42C Lathe was manufactured in the year 1998 in Germany. It is equipped with an Index control unit. The machine has a spindle speed of 5000 rpm. The machine comes equipped with a Cucchi barfeeder.

This 2-Axis lathe, manufactured in 1996, offers precision and versatility. With a turning diameter of 42mm and max. turning length of 280mm, it boasts a Siemens C200-4D control system. Equipped with 2 turrets and a bar loading magazine LM 3200, it facilitates efficient production. Notable features include backside machining in 3 positions and a synchronous spindle on turret 1. Thread milling and polygon turning capability enhance its functionality. For those seeking reliability and performance, consider this INDEX ABC 42 lathe. Contact us for further details.

This INDEX C-42 Speed Line Lathe was manufactured in 2004. This machine was initially connected in 2005 and is equipped with a Siemens 840 control system. It comes with IRCO short bar feeder for efficient material handling for enhanced productivity. In total is has 5 axes including Z, X, C, B, and Y. Thus it offers unparalleled versatility in machining operations. With 3 tool turrets and VDI 25 holders it enables precise and swift tool changes to meet diverse manufacturing requirements. Despite its currently non-operational status, it remains in exceptional condition, having been in production until November 2023. Contact us anytime for further questions!

This Index C65 Lathes machine was manufactured in 2005 in Hungary. Its maximum capacity of the spindle is 65mm. It has 3 turrets and a chuck diameter of 140/160. Contact us anytime for further information.

Used Index 6 Filling and Capping Spreads and Sauces Unit 2014 The filling unit known as the Index Indose is PLC and servo weight controlled allowing it to efficiently fill quantities ranging from 250 grams to 3 kilograms Depending on the specific product the filling speed can range from a minimum of 2000 pieces to a maximum of 4500 pieces per hour Currently the system is set up to fill 400 grams of hazelnut paste into glass jars but it can be easily adjusted to accommodate products with different viscosities and volumes The input voltage required is 380 volts at 50 Hz consuming 3 5 kW h of power Capping Unit On the other hand the capping unit named the Index In Close is a newer model from 2021 It is PLC controlled and capable of capping up to 4500 pieces Additionally it includes an automatic cap conveying elevator for streamlined operation Similar to the filling unit the capping system i ...

Complete with SCHMID LM 3200 bar loader Spindle passage 51 mm Turning length 280 mm Control SIEMENS, SINUMERIK 840 C INDEX control, C 200-4 Travel x1 90 mm Travel z1 280 mm Travel x2 81 mm Travel z2 80 mm Max spindle speed . 6300 rpm Rapid traverse Rev. 1 24/24 m / min Rapid traverse Rev. 2 16/24 m / min X / Z axis feed force Rev. 1 5500/5500 Nm X / Z axis feed force Rev. 2 8300/5500 Nm - Revolver 1 for 7 tools + synchronous spindle - Revolver 2 with 6 tool places - 4 rear drilling stations (1 of which guided) - C axis

Number of spindles 6 Spindle passage 27 mm Turning length 59 mm Hex material 24 mm Square material 18 mm Cross slide travel 36 mm Longitudinal slide path 85 mm Spindle speeds 366 - 5020 rpm Torque 95 Nm Control INDEX Total power requirement 20 kW Machine weight approx. 5.5 t - 6 cross slides - 6 longitudinal slides - Polygonal device - Thread cutting device - hydraulic tapping device - Workpiece removal belt - Bar loading magazine make PIETRO CUCCHI, type AN-BN Accesories various tool holders, various collets, chip conveyors, coolant device

Index g 200 lathe loader Bar passage 60 Producer INDEX Model MBL Condition Used

Controller: Siemens C200 Type of bar feeder: LNS Hydrobar Max power: 11.5 KW Min-max diameter: 1-30mm

Manufacturer Index Model G 200 Year of manufacture 1999 Good condition

Index MS 18C Multispindle automatic lathe Double NCU SIR25 IEMCA bar feeder Machine can be seen in working condition

Controller: Siemens C200 Type of barfeeder: Index MBL Max. Power: 11.5 KW Min-max diameter: 1-42mm