二手 HAAS 出售

Haas ST 20 CNC Lathe Turret capacity : 12 Axis: X-Z Live tools : NO spindle speed : 4.000 rpm Chuck size : 210 mm Max Part Swing : 533 mm

Lathe with combined control system CNC / manual Max. adjustable diameter over bed - 483 mm above the carriage - 282 mm Processing range Distance between centers - 1219 mm Max. processed diameter - 406 mm Poppy. machining length - 1219 mm (when turning between centers) Spindle Max. spindle rotation speed - up to 2000 rpm (stepless regulation) Max. moment - 203 Nm at 150 rpm Spindle power, max. - 8.9 kW Spindle landing - A2-6 The lathe chuck is not included in the basic delivery Spindle bore - 76 mm Feed X-axis travel - 203 mm Travel along the Z axis - 1219 mm Force of movement along the X axis - 13.8 kN Force of movement along the Z axis - 10.4 kN Idle travel speed along the X axis - up to 1.9 m / min Idling speed along the Z axis - up to 3.8 m / min Instrumental post not included Tailstock Back Center Taper - MK4 (Center Not Included) Travel stroke length - 1219 ...

Max. X axis movement, mm 508 Max. movement along the axis Y, mm 406 Max. movement along the Z axis, mm 508 Table length, mm 660 Width of a table, mm 356 Max. table load (equal. distributed), kg 1361 Spindle Cone Size 40 Maximum spindle speed, rpm 8100 Max. spindle power, kW 22.4 Max. torque, Nm 122 Max. axial force, kN 18.7 Max. idle feed speed, m / min 25.4 Max. XYZ axial feeds, m / min 16.5 Number of positions in the automatic tool changer, pcs. 20 + 1 Positioning accuracy, mm ± 0,0050 Year of manufacture of the machine 2013. The machine is in excellent condition. Equipped with a module for mounting the fourth axis. Connected. You can watch at any convenient time.

Haas VF-3 Vertical Machining Center Installation done November 2014 X : 1016 mm Y : 508 mm Z : 635 mm Machine is in good working condition

Haas VF-4 HE Vertical machining Center (VMC) A versatile machine that has been in stable operation since new. The machine is now sold with a gearbox fault (locked in low gear, maximum approximately 400 rpm). Some wear on the table guide screw has been identified. Tools are not included. Specification: Control panel: Haas Control: Fanuc X-axis 1270 mm Y-axis 508 mm Z-axis 635 mm Table size 1320 x 500 mm Max. table load 800 kg Speed range 10000 rpm Milling spindle drive power 15 kW Number of tool positions in the magazine 24 pieces Weight approximately 5.5 ton

Haas VF-4 Vertical Machining Center X : 1270 mm Y: 508 mm Z : 635 mm HRT 210 CNC Servo rotary table HSM High speed machining Chip conveyor Preperationg of 4th axis

Haas VF3 Vertical Machining Center X : 1015 mm Y : 508 mm Z : 600 mm Machine can be tested

According to the 2019 nameplate. Purchased in 2020. Didnt work much. There is equipment. In excellent working condition. Located in Kaliningrad. Sold by a private person. Owned machine. Made in USA

x 406mm Y 305mm Haas control Max spindle speed 6000 rpm Main spindle power 6 kW Tool magazine 10 pcs. SK 40 cone Dimensions 2.0 x 2.0 x 2.5 m Weight approx. 2.2 t

X - 1250mm Y - 508mm Z - 650mm - Haas controls - warehouse 20 pcs - 7500 revolutions - CT40 cone - chip ejector - documentation 4 axis hrt 210 and a faster and more powerful processor

Haas ST 30 CNC Lathe Chuck size : 254 mm Maximum Turning Diameter : 533 mm

Type: SL 20HE Parameters: 262 mm, 508 mm Manufacturer: HAAS Year of production / SO / GO: 2004 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Max. turning diameter 262 mm, max. turning length 508 mm.

XYZ axis movements: 762x406x508 Table size 914x356 Spindle Taper SK40 Spindle Speed 8100 rpm The spindle is equipped with a gearbox for processing difficult materials. Positioning accuracy mm 0.005 Tool magazine 20 items The machine is in excellent condition, in operation - you can come and see at any time

Haas VF3SS CNC Vertical Machining Center All maintenance has been done regularly Machine is in very good condition It has been used only for aluminium and plastic X : 1000 mm Y : 500 mm Z : 650 mm Tool and Part measuring probe(Renishaw) Chip conveyor

Machine weight: 6033 kg Total machine input:: motor 22.4 kW Spindle drilling: diameter 88.9 mm Spindle speed - range: 3400 Movement in the X/Z axis: : 239/1588 mm Max. part swing:: 533 mm Max. cut length:: 1588 mm Machine dimensions lxwxh: 5110x2290x2340 mm

The machine is in excellent technical condition. X Stroke (mm): 213 Z stroke (mm): 572 Spindle speed (rpm): 5000 Spindle power (kW): 14.9 Chuck Size (Right): 8 Spindle bore (right) (mm): 51 Driven tools (rpm): 4000 Horse: Yes The lathe worked only in one-shift operation. Dimensions: 3620 x 2290 x 2340mm Weight: 4000 kg By prior arrangement, the possibility of a tour in progress.

Haas SL-10T CNC Lathe New turning tools are also included(paid approx. €3440), chuck (packs) for individual production and chuck (cartridges) for working from bar. The machine is in operation and the condition and accuracy can be tested. The lathe has an arm with a probe for quick tool presetting. Maintained regularly.

Machine is in very good condition 15 screen X : 406 mm Y : 305 mm Z : 254 mm(Can be extended to 360 mm) Chip Conveyor Auger

Haas ST 30 CNC Lathe Chuck Size : 254 mm Maximum Part Swing : 533 mm Haas Control Unit

The VF-2TR is a versatile 5-axis machining center based on the popular VF-2 VMC platform. It provides full simultaneous 5-axis motion, or can position a workpiece to almost any angle for machining. X : 762 mm Z : 406 mm Z : 508 mm

X - 1000mm Y - 508mm Z - 650mm - Haas controls - warehouse 20 pcs - 7500 revolutions - CT40 cone - chip ejector - documentation 4 axis hrt 210 and a faster and more powerful processor

5-axis machining center UMC 750SS The machine comes from a stopped automotive project and has very few productive and operating hours. Producer: HAAS Manufactured in: 2018/19 Table diameter: 500 mm Maximum table load (evenly distributed): 300 kg Spindle drive power: 22.4 kW (30PS) Number of tools in the magazine: 40 + 1 Maximum spindle speed: 15000 1 / min X-axis travel length (mechanical feed): 762 mm Travel length Y-axis (mechanical feed): 508 mm Travel length Z-axis (mechanical feed): 508 mm SK 40 Fast feed: 30.5 m / min IKZ 1000PSI KSS fine filter Machine height: 2800 mm Machine length: 4270 mm Machine width: 2350 mm Machine weight: 6464 kg

Haas Minimill HE CNC milling machine for sale. HE version, i.e. with an enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill version. Milling machine manufactured in 2008, fully operational. In our company, it is used for unit production (steel and aluminum) and short series

HAAS VF-3 BHE machining center Description Machine in service, regular maintenance. Travel X Y Z, 1016x508x635 - Table load 1588kg - Table dimensions 1219x457 Spindle/table nose 102 - 737 15kW motor - BT40 cone 10000rpm option 24+1 tool side changer option. UGV option TSC 21bar spindle center coolant option with auxiliary filtration. 4th axis connection preparation option. Year 2009 Number of hours machining cycles: 11660 Number of hours under power: 13000 Weight 6t300

Haas ST 30 Y CNC Lathe with very low working hour Cycle time of 3800 hours, so it is relatively new machine. It has turret with BMT65 holders. Machine in full spec; Part catcher Tailstock Renishaw tool setter 20 bar high pressure coolant Cool cabinet for electro wardrobe 3 pieces fixed axial tool holder BMT65 3 pieces fixed radial tool holder BMT65 Only 4000 working hours, yom. 2019 VPS(active visual programming system) NGC new generation of numeric control 10“ jaw chuck Machine is working under power in full capacity.

Vertical Milling Machining Center HAAS VF-11/50 Table dimensions, mm: 3005 1000 Max. movement along the X axis, mm 3048 Max. movement along the axis Y, mm 1016 Max. displacement along the Z axis, mm 762 Maximum spindle speed, rpm 7500 Completely cast iron bed Fully enclosed, sealed safety guard Servomotors for axial movements through a gear motor Steel hardened guide bearing blocks Ball screw with double fastening and pre-tensioned nut Automatic lubrication system for guides and ballscrews Ball screw thermal expansion compensation system Retractable coolant tank design Coolant system with 358 liter tank Manual air gun for removing chips from a part and a machine Automatic centralized lubrication system Machine lighting Machine Status Indicator Lamp Electromechanical door lock for work area fencing Auto power off function Set of adjusting supports Metric Desktop Sp ...

The vertical machining center HAAS VF 6B/40HE is in good technical condition. HAAS CNC control system ( FANUC compatible ) Cooling device with pump including 300 l tank. 4th axis prepared with a connector for connecting a continuously controlled rotary table. Clamping surface of the table: 1626x711 mm Longitudinal movement of the table - x-axis: 1650 mm Transverse table movement - y axis: 800 mm Vertical movement of the table - z axis: 762 mm Spindle taper: SK 40 Spindle speed: 0-7500 rpm Number of places in the stack: 24 + 1 positions pcs Max. workpiece weight: 1814 kg For NC rotary table A: : 999.999 Spindle drive:: 15kW vector spindle control - double DELTA winding Basic torque:: 340 Nm

Regular service, freshly serviced after hydraulic cylinder GO, oil changed, belts replaced and overall in very good condition. Accessories-tool holders, jaws, high pressure cooling. Turning diameter over bearing: 533 mm, max. turning length: 660 mm, feed diameter: 250 mm, spindle clearance: 65 mm Spindle speed: 3,400 rpm, spindle power: 22.4 KW, number of tools: 12 x VDI 40 tool probe, including tool holders.

Z Axis travel: 584.2 mm Turning Diameter: 406.4 mm Spindle connection: 1st ASA 6 - 2nd ASA 5 Chip conveyor: Yes on the whole Self-Centered Main Spindle Dimensions: 1st d. 205 - 2nd d. 205 Max Bar Passage Capacity: 50.8 mm Spindle power Kw: 1st 22.4 kw - 2nd 15 Kw Government Unit: Hass Main Spindle Spindle Speed: 1st 4.800 - 2nd 4.800 Rotating Diameter: 806.45 mm

We hereby offer this used Haas Minimill HE vertical machining center from 2008, located in Poland. This vertical machining center is powered by a high-precision Haas control unit, ensuring exceptional accuracy and efficiency. With a generous working area measuring 914 x 305 mm, a rapid 6000 rpm spindle speed, and a robust 6 kW motor, the Haas Minimill HE is your ultimate choice for precision machining and top-tier manufacturing. Technical specifications: Year: 2008 Made in: USA Control unit: Haas X-Axis travel: 406 mm Y-Axis travel: 305 mm Z-Axis travel: 254 mm Table length: 914 mm Table width: 305 mm Spindle speed: 6000 rpm Spindle taper: SK 40 Motor power: 6 kW Tool magazine: 10 pieces Dimensions: Length: 2000 mm Width: 2000 mm Height: 2500 mm Weight: 2200 kg Features: -Enlarged Z axis departure by approx. 70 mm working compared to the standard Minimill versio ...

Tool holders included. The machine is connected and operational, the condition can be assessed live. It is for sale due to lack of sufficient load and the need to free up space.

Haas SL-10HE CNC Lathe 6 inch Without tailstock Machine is in good condition Machine can be seen in working condition

We hereby offer this used Haas TM2-P Vertical Machining Center from 2019. This robust machining center features a Haas control unit, offering precision and versatility. Technical specifications: Year: 2019 Made in: USA X-Axis travel: 1016 mm Y-Axis travel: 406 mm Z-Axis travel: 406 mm Feedrates X-Y-Z: 10.2 m/min Table length: 1466 mm Table width: 267 mm Table load: 159 kg Spindle nose to table: 508 mm Motor power: 5.6 kW Spindle speed: 6000 rpm Spindle taper: BT 40 Dimensions: Length: 3230 mm Width: 1980 mm Height: 2540 mm Weight: 2295 kg Additional Details: This machine comes complete with essential tool holders, milling heads, drill heads, and an extra batch of cutting materials (approximately 25 pieces). Elevate your metalworking capabilities with this reliable Haas TM2-P.

The machine is in perfect condition, only aluminum has been machined on it. X axis: 762 mm Y axis: 406 mm Z axis: 508 mm Spindle speed 12000 rpm-1 Work table dimensions 914 x 356 mm Machine dimensions L x W x H 2570 x 2510 x 2570 mm Machine weight: 3540 kg Accessories: probes, tool holders approx. 10 pcs., chip conveyor By prior arrangement, the possibility of a tour in progress.

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HAAS AUTOMATION Technical data Table length: 1219 mm Table width: 457 mm Table load max.: 794 kg Longitudinal travel (X-axis): 1016 mm Transversal travel (y-axis): 508 mm Vertical travel (z axis): 635 mm Pallets: number: 2 Tool changer: Number of tools: 40 Tool diameter max.: 64 mm Diameter with free adjacent pockets: 127 mm Tool lenght: 330 mm Max. tool-weight: 5.4 kg Time of tool changing: 2.8 sec Distance spindle nose to table: 742 mm Spindle speeds: stepless up to: 12000 rpm Work feed rate: 21.2 m/min Rapid traverse:: 35.6 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 22.4 kW Machine´s weight about: 6300 kg Various accessories: Coolant system: 208 l Tool setter Renishaw Pallets chanching device:

Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel:     1270mm Y - Travel:     508mm Z - Travel:     635mm Table Length:   1320mm Table Width:    500mm Table load:     800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length:         3500mm Width:          2500mm Height:         2800mm Weight:         5500kg

Table length: 1270 mm Table width: 500 mm Longitudinal X: 1270 mm Cross Y: 508 mm Vertical Z: 635 mm CNC Brand: Haas X - Travel:     1270mm Y - Travel:     508mm Z - Travel:     635mm Table Length:   1320mm Table Width:    500mm Table load:     800 Feed rate X-Axis:20000mm/min. Feed rate Y-Axis:20000mm/min. Feed rate Z-Axis:20000mm/min. Spindle Taper:  40ISO/Bt/Mk Power on spindle:15kW Speeds / ranges:10000Rpm ATC / revolver: 24 Length:         3500mm Width:          2500mm Height:         2800mm Weight:         5500kg