二手 FLOTT 出售

Drilling machine, drill press, pillar drill, column drill -Manufacturer: Flott, column drill type SB 23 pieces -Speed speeds: 200 - 2000 rpm, continuously variable via variator disc -Table size: 300 x 300 mm, travel 595 mm -Spindle holder: MK3 with drill chuck -Spindle stroke: 150 mm -Throat: 295 mm -Column: Ø 110 mm -Dimensions: 920/450/H1920 mm -Weight: 345 kg

Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Bench drill, stand drill, pillar drill, pillar drill -Manufacturer: Flott, bench drill type M2 ST -Clamping table: 260 x 200 mm -Travel: 310 mm -Spindle holder: MK2 with drill chuck 3-16 mm -Projection: 240 mm -Speeds: 80-4000 rpm -Pillar: diameter 82 mm -Spindle stroke: 100 mm, depth stroke with fine adjustment -Motor power: 0.75 kW -Voltage: 400V -Dimensions: 750/340/H1100 mm -Weight: 135 kg

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Tapping machine, bench drill -Spindle mount: B12 -Tap chuck: Tapmatic 30 X M1,5-M7 -Projection: 165 mm -Motor power: 0.25 kW -Weight: 60 kg

bore capacity in steel (diameter): 23 mm throat: 300 mm bore stroke: 150 mm table-size: 300 x 410 mm spindle taper: MK 2 total power requirement: 1,4 kW weight of the machine ca.: ca. 315 kg dimensions of the machine ca.: ca. 700 x 900 x 1900 mm Machine has fallen over. A sheet metal cover and 2 levers of the cross lever broke off. Concentricity has been tested and is OK. Functional video available. Machine can be viewed and tested on site. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

钢钻能力（直径）：32 mm 投影：300 mm 钻孔行程：150 mm 铸造钻孔能力：36 mm 主轴架 MK：3 主轴转速 - 无级可调：140 - 1400 rpm 工作台尺寸：500 x 360 mm 柱径：125 mm 总功率要求：1.5 kW 机器重量约：335 kg 空间要求约为：500 x 800 x 1850 mm 机器来自培训公司，并且维护得比需要的 更多。 一般条件非常好，所有功能都经过检查。 附件： - 夹紧钻卡盘 - 无级变速 - 照明 此广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理。

bore capacity in steel (diameter): 14 mm throat: 200 mm bore stroke: 60 mm morse taper: 1 MK table:: 280 x 260 mm turning speeds: 430 - 4500 U/min column diameter: 70 mm weight: 100 kg NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools). - automatic spindle feed with feed overload protection - Infinitely variable speed setting by means of an adjusting lever - Spin ...

刀具锥度：MK 2 数字：. 重量： 100 kg

年份：约1988 年 瓦里奥：. 刀具锥度：MK 2

序列号： 33320007 频率： 50 Hz 伏特： 380 V 安培： 3,8 重量： 300 公斤 锥度 MK： 3

width of the strips: 75 mm band length: 2000 mm band speed: 30,0 mm/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3,75 kW weight of the machine ca.: 90 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust ...

width of the strips: 150 mm band length: 2000 mm band speed: 30,0 mm/sek grinding width: 500 Plantisch mm suction capacity: 630 m³/h total power requirement: 3,75 kW weight of the machine ca.: 100 kg range L-W-H: 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible ex ...

bore capacity in steel (diameter): 16.0 / 20.0 mm throat: 240 mm bore stroke: 100 mm spindle taper: 2 MK table:: 280 x 340 mm turning speeds: 130 - 2000 U/min column diameter: 90.0 mm flute distance: 125 mm T-slots: 2 x 14.0 mm total power requirement: 0.37 / 0.70 kW weight: 125 kg range L-W-H: 500 x 600 x 1900 mm Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Digital speed display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103752 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 6.0 / 10.0 mm throat: 200 mm bore stroke: 60.0 mm spindle taper: B 12 table:: 280 x 260 mm turning speeds: 430 - 9000 U/min column diameter: 70,0 mm total power requirement: 0.45 / 0.60 kW weight: 95.0 kg range L-W-H: 450 x 300 x 880 mm from a vocational training center () Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093645 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 13.0 / 16.0 mm throat: 185 mm bore stroke: 70.0 mm spindle taper: B 16 table:: 220 x 230 mm turning speeds: 500 - 3200 U/min column diameter: 75.0 mm total power requirement: 0.45 kW weight: 95.0 kg range L-W-H: 425 x 250 x 920 mm from a vocational training center () Furnishing: - manual spindle feed - Digital drilling depth display at the front including zero setting - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - EMERGENCY stop button, front - Connection cable + 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093644 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16.0 / 20.0 mm throat: 240 mm bore stroke: 100 mm spindle taper: 2 MK table:: 280 x 340 mm turning speeds: 130 - 2000 U/min column diameter: 90.0 mm flute distance: 125 mm T-slots: 2 x 14,0 mm total power requirement: 0.37 / 0.7 kW weight: 125 kg range L-W-H: 500 x 600 x 1900 mm Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - Machine swing feet (self-made) - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103751 Machine video: https://www.youtube.com/watch?v=gTVwBLikpZA The data for this ad was created with ModulMWS - the softwa ...

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Keyless drill chuck including taper mandrel - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103759 The data for this ad was created with ModulMWS - the software solutio ...

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

马铃薯去皮机，浮动，16 K �

钻 品牌：福乐 类型： TB 10 建造年份： 1985 钻孔深度 23 mm 电机 0.52 kW 380 伏 50赫兹 1.6 安培 提示： 技术数据和说明是当时订单确认的副本。数据仅供参� ��，不具有约束力�

钻 品牌：福乐 类型： 6个 规格： 钻头夹持器：B12 轮毂钻头卡盘：40mm 立柱距钻孔区域距离：180mm 立柱厚度：50mm 台面：180x260毫米 电机： 0.9 千瓦 转速： 1250-8000 rpm 重量：约20公斤 提示： 技术数据和说明是当时订单确认的副本。数据仅供参� ��，不具有约束力�

工作台、钻孔和攻丝机 福洛特 TBZ 型 15 GL 工厂编号 32177027 建造年份 1986 钻孔能力 15 mm 主轴支架 MK2 投影 195 mm 松醇行程 80 mm 工作台尺寸 275 x 200 mm 立柱直径 70 mm 主轴转速 80 - 4500 rpm 18 步 电机功率 0.55 + 0.75 kW 电源连接 380 伏，50 赫 兹 - 从电机和 2 个皮带级到钻孔主轴的 6 个皮带台阶 2 种电机转速 - 提供 3 个导向滤芯 0.7- 0.8 和 28G - 通过立柱 上的带齿条的曲柄调节钻头高度- 原始金属下部结构 空间要求 长 x 宽 x 高 700 x 350 x 1850 mm 重量约 150 公斤 状况良好; 二�