二手 DOOSAN 出售

Description: Nominal capacity 1500 kg ,, A 500 mm B 3030 mm , Weight without battery 2380 kg Battery weight 700 kg Fork length 1500 mm , Including charger : Manufacturer EB, D400 g 48 / 80 B1 - FML Puls , Battery charger 48 Volt UE 400 Volt IEM 8,0 Ampere 50-60 Hertz A truck with an access ramp will be ordered for collection Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,000 mm, weight approx.: 3,030 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system MORIN hydraulic attachment 3 fixed buckets (2m, 1.5m, 600mm) Overhauled machine Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of beam As is (scales will be reassembled for sale) Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: 2.9m dipper High and low flow lines 700mm offset skid 3m wide GROENEVELD automatic greasing system End of dipper (No attachment, no buckets) Overhauled machine OPERATING MASS: 22400 KG ENGINE POWER: 124,3 Approx. Onsite Dimension. (l x w x h): 9,490 x 2,990 x 3,005 mm, weight approx.: 22,100 kg

Description: Technical data Table size: 1600 ,x 750 mm Max. weight on Table: 1500 kg  , X-axis: 1525 mm Y-axis: 762 mm Z-axis: 625 mm  , Spindle Speed: 12.000 rpm Spindle Motor Power: 22 kW  , Spindle Taper: BT-40 Tool Changer Positions: 30  , Provided with: Chip Conveyor Kitagawa 4th axis (310 mm chuck) Oil Cooler 30 bar trough Spindle Cooling  , z-motion: 625 mm, max. workpiece weight between centers: 1,500 kg, x-motion: 1,525 mm, y-motion: 762 mm, control: Fanuc 32I-A, table surface area l x w : 1600 x 750 mm, taper: BT 40, toolchanger positions: 30, power capacity - spindle: 22 kW, turning speed range: 12.000 rpm, weight approx.: 13,500 kg, Approx. Onsite Dimension. (l x w x h): 4,850 x 2,780 x 3,130 mm

Description: Technical Data Table size: 1630 ,x 760 mm Max. weight on table: 1300 kg  , X-axis: 1630 mm Y-axis: 762 , mm Z-axis: 650 mm  , Spindle speed: 8000 rpm Spindle motor power: 18.5 kW  , Spindle Taper: BT-40 Tool Changer positions: 30  , Provided with: Chip Conveyor Renishaw OMP40-2 Probe Oil Cooler 30 bar trough Spindle Cooling  , z-motion: 650 mm, max. workpiece weight between centers: 1,300 kg, x-motion: 1,630 mm, y-motion: 762 mm, control: Fanuc I Series, table surface area l x w : 1630 x 760 mm, taper: BT40, toolchanger positions: 30, power capacity - spindle: 18.5 kW, turning speed range: 8,000 rpm, weight approx.: 13.500 kg, Approx. Onsite Dimension. (l x w x h): 4,850 x 2,780 x 3,130 mm

Description: PDF Data Sheet attached in the 'Documents' section Machine declared with approximately 4500 working hours. Equipped with : ACE HP 5100 Evacuator, YOM 2014, 338 kg NANACON CIL1101 refrigeration unit Transformer JEIL TRANS, YOM 2014, 334 kg High pressure unit HIPRECO KHS-230/400214-00244 Not included in sale : ALLMATIC parts holder not included with sale. HEPA filter LNS not included with sale. z-motion: 750 mm, max. workpiece weight between centers: 500 kg, x-motion: 850 mm, y-motion: 700 mm, control: FANUC Series 31i-MODEL B, pallet table size: 500x500 mm, numbers of pallets: 2, taper: ISO#40, 7/24 Taper, toolchanger positions: 80, feed range: 60,000 mm/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 4,500 x 3,000 mm

Description: Serial number : DWBHEDK0P80050512 ENGINE power : 135 hp DOOSAN engine DL06 displacement 5,89 L water cooling number of cylinders : 6 Bucket capacity : 1,4 m3 Digging depth : 6600 mm Boom length : 5700 mm Boom length 2900 mm IMPORTANT: The buyer is responsible for everything related to the loading of this equipment Approx. Onsite Dimension. (l x w x h): 10,000 x 3,000 x 3,500 mm, Blade width: 1,560 mm, weight approx.: 21,500 kg

max. turning diameter: 540 mm max. turning length: 1.020 mm bar capacity: 65 mm Spindle speed: 5.000 min -1 driven tools turning speeds: 10.000 U/min control: FANUC 18i-TB Dimensions (L x W x H): 4.520 x 2.300 x 2.600 mm machine weight ab.: 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing over bed: 750 mm Swing over cross slide: 650 mm max. turning diameter: 540 mm Max. Turning length: 1.020 mm bar material dia.: 65 mm control: FANUC 31i-B Dimensions (L x W x H): 4.850 x 2.525 x 2.805 mm weight of the machine: 12.000 kg CNC Turning- and Milling Center | DOOSAN - PUMA MX 2100 ST equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2100ST | MX-2100 ST | MX 2100ST | MX2100 ST The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 840 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 8000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 (15 min) kW tool change unit: 30 Pos. voltage: 380 V total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - CNC Control Siemens 840D - INTERFACE FOR 4 AXIS+ 4 AXIS NIKKEN - HP COOLING TROUGHT THE SPINDEL 20bar - CHIP CONVOYER The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1120 mm z-travel: 1000 mm control: FANUC 18 I MB numbers of pallets: 2 pallet size:: 1000 x 1000 mm max. workpiece weight: 2000 kg Spindle RPM: 6000 1/min spindle drive: 22/26 kW max. torque on the spindle: toolpiece magazine: chain magazine: 60 Stück rapid travel x/y/z: 12 m/min distance spindle /table: 75 - 1195 mm total power requirement: 68,46 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: m Horizontal machining centre with: - CNC control FANUC 18iMB - 2 x 1000x1000mm pallets - B-axis with 1° indexing - IKZ - high cooling through the working spindle & external 30-70bar - 60-fold tool magazine ISO 50 - Chip conveyor - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

轴行程： 1630 mm Y轴行程： 762 mm Z轴行程： 650 mm 控制：Fanuc 总功率要求：kW 机器重量 ca.： t 机器尺寸 ca.： m

turning diameter: 750 mm turning length: 1520 mm control: Fanuc 18 iT-B total power requirement: 22,0 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X 轴行程： --- mm Y 轴行程： --- mm Z 轴行程： --- mm 总功率要求： --- kW 机器重量 约： 13.5 t 机器尺寸 约： --- m

车削直径： --- mm 车削长度： --- mm 控制： --- 总功率要求： --- kW 机器重量 ca.： --- t 机器尺寸 ca.： --- m

Engine Brand: DOOSAN, Conditie: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219134, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

Type: Engine, Type number: DAEWOO PO34TI GENERATOR 50 KVA

; Gross weight [kg]: 1340; Engine: Doosan DN03-OOG01; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 108

; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

; Gross weight [kg]: 5950; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000

; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250

; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625

; Gross weight [kg]: 4200; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800

; Gross weight [kg]: 4800; Engine: Doosan DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Gross weight [kg]: 2100; Engine: Doosan P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 285

; Gross weight [kg]: 3100; Engine: Doosan P126TI-II; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 2985; Engine: Doosan P126TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 5650; Engine: Doosan DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Gross weight [kg]: 9370; Engine: Doosan DP222CC; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

; Gross weight [kg]: 9370; Engine: Doosan DP222CC (E); Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

CONTROLS   CNC controls FANUC 18 T BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 700 mm MAIN SPINDLE   spindle revolutions (max): 3500 /min   spindle bore diameter: 91 mm   c-axis: yes COUNTER SPINDLE   Z-axis travel: 1105 mm X/Z SLIDE   X-axis travel: 362 mm   tool fixture: Turret   number of tool positions (total): 12 TOOL MAGAZINE   number of positions: 12 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4820 mm   space requirements -front/back-: 3200 mm   total he ...

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm.

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.

This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm.

This DOOSAN DNM 500 (2012) 4-axis Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a 8,000 rpm spindle, BT40 tool taper, a 4th axis (lehmann rotary table - dividing head) and a FANUC control unit. The table size is 1200 x 540 mm (X-axis 1020 mm / Y-axis 540 mm / Z-axis 510 mm). As additional equipment it comes with chip conveyor and internal cooling (IKZ). The machine is in very good condition due to installation of a new spindle and refurbishment of the rotary table in 2021. The rotating union has also renewed recently in 2024. It has operated 24420 run time hours and 9802 cutting hours.

This DOOSAN V8300MR Lathe was manufactured in the year 2020 in Germany. It is equipped with a FANUC 0iTF Control unit. The machine has a 1 BMT75 Driven Turret with 12 positions (7.5kW, 4500 rpm), a Chip Conveyor with Belt and an axis/spindle Load Monitoring System with triple signal light. It is included a Hydraulic Chuck 15 (380[mm]) and a Standard tool kit: 2 Straight Driven Tools, 2 Angular Driven Tools, 1 Set of Tool Holders for Turning Knives and a Hard Jaws 15 (1 Set: 3 Pieces).

This DOOSAN MYNX 5400/50 Vertical Machining center was manufactured in the year 2022 in South Korea and has 1452 production hours, of which 211 are cutting hours. It is equipped with a DN Solutions Fanuc i- Series control unit. The machine has a spindle speed of 6000 rpm.

This DOOSAN DNM 650 Vertical Machining Centre was manufactured in 2012 in South Korea. It is equipped with a HEIDENHAIN iTNC 530 control and internal cooling - IKZ - 18 bar. This 5-axis machining centre has a ISO 40 spindle with 12,000 rpm and 18kW motor power. It comes with presetting, chip conveyor and a 30 tool magazine. The table size is 1300 x 700 mm.

This DOOSAN DNM 400A Vertical Machining center was manufactured in the year 2013 in Korea and has 37790 production hours. It is equipped with a Fanuc control unit and has 3 axis combined with an ISO 40 tool taper. The machine has a spindle speed of 8000 rpm and a spindle motor power of 11 Kw.

This DOOSAN Puma 4100B Horizontal Lathe was manufactured in 2018 in South Korea. It is equipped with a maximum workpiece diameter of 550 mm and a maximum workpiece length of 1042 mm. Controlled by a FANUC 0i Series control, it offers a spindle speed of 2000 rpm with a spindle power of 35 kW (30 min) / 22 kW (continuous). This machine accommodates 10 tools and features a A2-11 ASA taper size, providing versatility and precision in machining operations. It comes with chip conveyor, hydraulic, lubrication and cooling system. The machine has a run time of 796 hours, is still under power and can be inspected at any time.

This DOOSAN PUMA TT1800SY lathe was made in the year 2011. It is equipped with a FANUC 31i-Model A control unit. The machine has a spindle speed of 5000 rpm.

This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit.

This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.