二手 DMG MORI 出售

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.16800 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing sensor Motor ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control - Chip trough; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools120 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12300 KgMiscellaneousClamping SystemDIN 69872 NC swivel rotary tableTable surface Ø 650 mm5. Axes (swivelling range) +/- 120 degree4. Axes (swivel ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² //  ...

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/ ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataRapid traverse longitudinal/transverse/vertical30/30/30 m/minFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-AClamping System DIN ISO 7388-3-A, ADToolchanger with set up station for tool loadingNumber of tools 30

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Set of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.Set of additional documentationSet of additional documentation Option includes: - machine manual ...

CharacteristicsTable surface850 x 650 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minDimensions (L x W x H)3,07 x 2,67 x 2,84 mWeight approx.5600 KgGeneralVertical Machining Center; Control: Control SIEMENS 828D Mechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSet of additional documentationSet of additional documentation Option includes: - machine manual - control manual - parts catalogue (in paper version)

5-Axis milling machine manufactured in 2013, the DMG DMU 80 P Duoblock offers precision milling capabilities, ensuring reliability and accuracy while meeting a wide range of manufacturing needs. Contact us for further information on the DMG DMU 80 P Duoblock machine we have for sale.

This 5-Axis vertical machining centre was manufactured in 2014. The DMG MORI DMF 260/11, equipped with a Heidenhain iTNC 530 HSCI control, boasts a rigid table with an integrated rotary axis, offering precision and versatility. With a swivel head and 10,000 rpm B-axis spindle, it ensures efficient machining of complex parts. Additional features include an infrared measuring probe for accurate measurements and a spray gun for swarf removal. Experience enhanced productivity with this reliable machine center. Contact us for further information.

5-axis vertical machining centre manufactured in 2014 with immediate availability. This DMG MORI DMF 360/11 machine offers a rigid table with an integrated rotary axis, a swivel head B-axis, and a high-speed spindle. The control system is a 3D-control Heidenhain iTNC 530 HSCI, which provides accurate and efficient machining. The DMF 360/11 also features an infrared measuring probe, a tool laser measuring system, and a manual control panel. The opportunity to buy this DMG MORI DMF 360/11 vertical machining centre is now available. Contact us for more information on this exceptional machine.

This DMG MORI GMX 200 Linear Lathe was manufactured in the year 2004 in Germany and has 23500 spindle hours. It is equipped with a SIEMENS 840D powerline control unit with an Ethernet interface. The machine disposes of a main drive counter spindle which has a speed range of 5000 rpm, a main spindle left and a turning/milling spindle which has a speed range of 12000 rpm, a couple of hydraulic three-jack chucks and cooling tank with cleaning with belt filter and a spray gun. It has a differential pressure for main spindle and for counter spindle.

This DMG MORI NTX2000/1500SZ Lathe was manufactured in the year 2016 in Japan and has 9715 production hours, of which 4568 are spindle hours. It is equipped with a DMG MORI ERGOline control unit and has 5 axis. The machine has a spindle speed of 5000 rpm.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

This DMG CMX 1100 V Machining center (vertical) machine was manufactured in 2018 in Italy. This machine has a table size of 1400 x 560 mm. The spindle operates at speeds up to 12000 rpm with a power output of 13 kW. It features a tool capacity of 30 tools and includes a Renishaw probe, optical scales, and tool presetting functionality. Contact us anytime for further information.

X : 1050 mm Y : 530 mm Z : 510 mm Machine is in excellent condition

DMG Mori CMX 70 U 5 axis machining center Spindle has been replaced with new one recently Probe X : 750 mm Y : 600 mm Z : 520 mm Machine is in excellent condition

HEIDENHAIN ITNC 530 CNC X axis (strokes) 400 Y axis (strokes) 400 Z axis (strokes) 375 B axis (spindle head movement stroke) 0 - 108 C axis (table rotation) 360,000 max dimensions of the workable piece 450x400 Spindle power Kw 35 KW Spindle speed (main spindle) 18,000 Maximum warehouse capacity 30 Spindle mount (spindle) HSK 63 Renishaw system yes Air blow through dry machining spindle yes Chip conveyor yes Consep chip conveyor with integrated paper filtration 5 axis continuous package yes

The machine is in good technical condition, it is possible to test it in operation by agreement. 5 axes, ØS Heidenhain 620, chip conveyor, control wheel, max. revolutions 12,000, weight 5,000 kg, number of working hours 1580 hours, touch probe, tool measuring probe.

DMG Mori #CTV-250-2nd, Vertical CNC lathe, Siemens Sinumerik 840D control, 28 x 12 table, 60 m/min X, 40 m/min Z, low hours, 2016 CTV 250 CNC vertical turning centre right hand version with control SIEMENS SINUMERIK 840D SLIMline Compact, fast, flexible and highly productive vertical lathe All axes X, Z, C are arranged at the top Large Z-axis stroke - thus machining of short and long workpieces with little set-up, Diameter up to 220 mm Control panel integrated into the machine - little space required

HEIDENHAIN ITNC 530 CNC X-axis (strokes) 500 Y-axis (travel) 450 Z axis (strokes) 400 B axis (spindle head movement stroke) 0 - 108 C axis (table rotation) 360,000 max dimensions of the workable piece 450x400 Spindle power Kw 35 KW Spindle speed (main spindle) 18,000 Maximum warehouse capacity 30 Spindle mount (spindle) HSK 63 Renishaw system yes Air blow through dry machining spindle yes Chip conveyor yes Consep chip conveyor with integrated paper filtration 5 axis continuous package yes

DMG Mori CMX 70 U 5 axis Machining Center Machine has been installed December 2019! Multimaster spindle

DMG Mori Milltap 700 Vertical Machining Center 700x420x380 10.000 rpm Siemens 840d Sl kontrol unit Preperation of 4th axis

DMG Mori NLX2500SY/700 CNC Lathe CNC controller: CELOS ERGOline Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Swing diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross-slide mm: ø742 Bar work capacity mm: 80 Upper turret Number of tool slots St .: 10 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5/3,7 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18,5/15 Spindle bore mm: ø111 Spindle nose: JIS A2-8 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7,5 Spindle bore mm: ø73 Spindle nose: JIS A2-5 Counter spindle travel mm: 734 Equipment Chip conveyor Signal lamp Tool measuring arm part catcher various jaws various tools Working time hours Under power:35850(July 2022) Rated power kVA: 40,27

DMG Mori DMU 50 Ecoline 5 axis machining center Machine is in good working condition 10,000 RPM DirectDrive engine Control Unit HEIDENHAIN TNC620 32 Sets of Magazines Tool measuring probe . Chip conveyor . Tool measuring probe . It has automatic track reset feature. It has been serviced by DMG service. Since we know the history of the machine, the previous operations are as follows. -B axis Brake changed -Z axis Ball Screw changed -Y axis Slide + Car ball screw has changed. -Y axis ruler changed. We have all the service records

X : 750 mm Y : 600 mm Z : 520 mm 12000 rpm Control unit : Heidenhain Renishow tool and part measuring Coolant through spindle Axis measurement scales Number of spindle hours : 9400 Machine is in excellent condition

CNC turning lathe Brand: DMG Mori Model: MSL 60 Year of manufacture: 2010, Bar passage: 60 mm, C axis, 7 axes, Sub-spindle integrated in main turret for second operations, 2 turrets, Stationary tools on comb head, Battery tools second operations, Possibility of 4 tools machining simultaneously, CNC: Fanuc 31i, Main motor: 7.5 kW, Main spindle speed: 5000 rpm, Bar loader interface, Parts collector, Main clamp holder and secondary integrated head, Inspectable by a qualified technician, working

Turning diameter: 400 mm Turning length: 500 mm Turret positions: 12 CNC Brand: Siemens CNC Model: SIEMENS 840D Max. turning Ø: 400mm X-Axis:         267mm Z-Axis:         500mm Spindle bore:   91mm Speedrange:     4000Rpm Spindle power:  18kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5,5kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   4Mk Stroke pinole:  120mm Quill Ø:        120mm Length:         3500mm Width:          2300mm Height:         2100mm Weight:         5000kg

Turning diameter: 65 mm Turning length: 220 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Fanuc 320i X-Axis:          X1= 165 and X2= 165 and X3=165mm Y-Axis:          Y3= 80 (+50 to -30)mm Z-Axis:          Z1= 220 and Z2=150 and Z3=678mm Spindle bore:    65mm Speedrange:      5000Rpm Spindle power:   20kW Subspindle speeds:5000Rpm Subspindle bore: 45mm Subspindle power:17kW ATC / revolver:  1, 2 and 3 = (3x) 12 Positions Speed live tools:4000Rpm Power live tools:3kW Length:          9260mm Width:           2480mm Height:          2700mm Weight:          11000kg

Turning diameter: 380 mm Turning length: 450 mm Turret positions: 12 CNC Brand: _Unknown / Other Max. turning Ø: 380mm X-Axis:         160mm Z-Axis:         450mm Spindle bore:   51mm Speedrange:     5000Rpm Spindle power:  16.5kW ATC / revolver: 12 Speed live tools:4500Rpm Power live tools:8.4kW Pinole taper:   4Mk Stroke pinole:  400mm Length:         3200mm Width:          1995mm Height:         1800mm Weight:         3200kg

Table length: 630 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 450 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 1   CNC Brand: Siemens CNC Model: SIEMENS 840D X - Travel:               500mm Y - Travel:               450mm Z - Travel:               400mm B - Axis:                 -5 up to +110 Gr° Table Length:             630mm Table Width:              500mm Table load:               350 Feed rate X-Axis:         12000mm/min. Feed rate Y-Axis:         12000mm/min. Feed rate Z-Axis:         12000mm/min. Spin ...

Turning diameter: 42 mm Turning length: 350 mm Turret positions: 24 CNC Brand: Fanuc Collet device with inserts to 42 mm Tool holders normal and Live tools KUPA Servofeed 1100 bar feeder Part catcher and Conveyor Double Revolver live driven Renishaw Tool eye  Max. turning Ø:         680mm X-Axis:                 350mm B Axis:                 555° Spindle bore:           45mm Speedrange:             5000Rpm Spindle power:          8kW Subspindle speeds:      5000Rpm Subspindle bore:        42mm Subspindle power:       6kW ATC / revolver:         2 x 12 Speed live tools:  & ...

Table length: 450 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 16   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: DMG MACH-id     5320 MAKE         DMG Mori TYPE           DMU 40 monoBLOCK YOP             2008 SPECIFICATIONS X - Trave       l700 mm Y - Travel       400 mm Z - Travel        400 mm A - Axis      360 ° B - Axis   + 30 / - 120 ° Table load           250 Kg Table Ø      450 mm Feed rate X-Axis      50.000 mm/min. Feed rate Y-Axis       50.000 mm/min. Feed rate Z-Axis        50.000 mm/min. Feed r ...

Pallet length: 630 mm Pallet width: 630 mm Longitudinal X: 800 mm Cross Y: 800 mm Vertical Z: 800 mm Number of pallets: 2   Positions ATC: 120   CNC Brand: Siemens CNC Model: 840 D X – Travel:               800mm Y – Travel:               800mm Z – Travel:               800mm B-Axis indexing:          360° Table Length:             630mm Table Width:              630mm Table load:               1.200Kg Number of pallets:        2 Feed rate X-Axis:         60.000mm/min. Feed rate Y-Axis:         60.000mm/min. Feed rate Z-Axis:      &n ...

Table length: 1100 mm Table width: 600 mm Longitudinal X: 800 mm Cross Y: 530 mm Vertical Z: 510 mm Positions ATC: 40   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: Celos X – Travel:               800mm Y – Travel:               530mm Z – Travel:               510mm Table Length:             1.100mm Table Width:              600mm Table load:               1.000Kg Feed rate X-Axis:         30.000mm/min. Feed rate Y-Axis:         30.000mm/min. Feed rate Z-Axis:         30.000mm/min. Spindle Taper:            40ISO/Bt/Mk Power o ...

Table length: 850 mm Table width: 600 mm Longitudinal X: 640 mm Cross Y: 600 mm Vertical Z: 500 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 X – Travel:              640mm Y – Travel:              600mm Z – Travel:              500mm Table Length:            850mm Table Width:             600mm Table load:              600Kg Feed rate X-Axis:        40.000mm/min. Feed rate Y-Axis:        40.000mm/min. Feed rate Z-Axis:        40.000mm/min. Spindle Taper:           Sk40 ISO/Bt/Mk Power on spindle:        19kW Speeds / ra ...

Table length: 700 mm Table width: 500 mm Longitudinal X: 500 mm Cross Y: 400 mm Vertical Z: 400 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 124 Make: DMG MORI Type: DMU 50 M Control: HeidenHain TNC 124 YOP: 1998 Optical Digital read out B & C Axis 5 Axis on screen X – Travel:              500mm Y – Travel:              400mm Z – Travel:              400mm Table Length:            700mm Table Width:             500mm Table load:              200Kg Feed rate X-Axis:        5.000mm/min. Feed rate Y-Axis:        5.000mm/min. Feed rate Z-Axis:        5.000mm/min.  ...