型号
(生产厂家: BRANDT)
Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Premilling Unit yes Corner Rounding Unit yes Max feed speed 14 m/min Maximum panel thickness 60 mm Operating Units 8 nr Min. panel height 8 mm Max. panel height 60 mm Min. panel width 70 mm Min. edge thickness 0.3 mm Max. edge thickness 3 mm Max. forward feed speed 14 m/min Top pressure yes Pressure with idle wheels Panel support guides yes with positioning by NC yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Lamps to preheat the side of the panel yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes premelter for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 with positioning by NC yes No. Edge Processing Units 6 NO. EDGE PROC ...
Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Max feed speed 9 m/min Maximum panel thickness 50 mm Operating Units 4 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 9 m/min Top pressure yes Pressure with idle wheels Panel support guides yes Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes no. pressure roller 3 No. Edge Processing Units 3 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.27 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : glue scraping Safety standard CE mark yes Total installed power 3.5 KW ...
Description: Type of edging Thin edge Thick edge Solid wood Gluing System EVA Hotmelt Corner Rounding Unit yes Max feed speed 11 m/min Maximum panel thickness 55 mm Operating Units 7 nr Min. panel height 8 mm Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 8 mm Max. forward feed speed 11 m/min Top pressure yes Pressure with idle wheels Panel support guides yes No. Panel Sizing / Milling units 1 NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit automatic timed intervention : yes motor power : 2.2 KW Edge coil magazine yes no. positions 1 Gluing system yes glue pot for EVA hot melt glue yes Roller set to press the edge yes No. Edge Processing Units 5 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming Constructor model : HL 6130 no. motors : 2 motor power : 0.18 KW r.p.m. : 12000 RPM NO. EDGE PROCESSING UNITS 2 Processing Unit : fine trimming to trim ...
Description: BRANDT KDF 660 Profiline with joint cutter and corner rounder PU glue (and hot melt glue) Workpiece preheating: IR preheating Edge material: 0.4 - 15.0 mm Max. width of edgebanding: max. 66 mm (at 1 mm band thickness) Edging material on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm Workpiece thickness: Max. 8-60 mm Control: PC20+ Streckensteuerung with modem for teleservice 1. Joint milling 2. Chopping knife 3a. Pre-activation with IR heating 3b. Anti adhesive spray device 3c. Pre-melter, for quick change of adhesive 3d. Glue aggregate with glue application roller in follow-on or counterflow 3e. Program-controlled pressure zone 4. Capsaws - adjustable 0° - 15° 5a. Coarse milling (Bündig milling) -radial Milling units with 2-point adjustment, flat, phase radius up to 12 mm edge thickness 5b. Fine milling, with program-controlled adjustment for thickness, plane, phase or r ...
Description: Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2x) ...
Description: BRANDT T-55 Edge Bander Approx. Onsite Dimension. (l x w x h): 1,300 x 900 x 800 mm, weight approx.: 150 kg
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, units from the BRANDT KM 36 edge banding machine -Individual components: see photos -Price / fee: complete -Dimension total. 1200/800 / H530 mm -Total weight: 122 kg
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg
Shaped part edge banding machine, edge banding machine, edge banding machine -Workpiece thickness: 10- 85 mm -Fan heater: 6 kW pre-coated edges -Cut knife -edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135kg
Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Unit: from edge banding machine BRANDT KM 35 -Engine. Groschopp 0.25 kW / 2800 rpm -Individual components: see photos -Dimension total. 590/360 / H330 mm -Total weight: 30 kg
Workpiece length: 1800-4200mm, max. profile height: 200mm, min. workpiece thickness: 16mm, working height: 950mm, connection cable: 12kW, length: 6250mm, height: 2050mm, weight: 3.8t.
Manual static postformer Min/Max. workpiece length 1600 / 3100 mm. Profile height max.150 mm. Workpiece thickness min. 16 mm. Working height 950 mm. DOCUMENTATION AVAILABLE
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control
最小/最大工件长度 1800 / 4200 mm。 最大型材高度 200 mm。 最小工件厚度 16 mm 工作高度 950 mm。 安装功率 12 kW
工件厚度(半径) 约 16 - 55 mm 工件厚度(倒角) 约 12 -55 mm 工件宽度 最小 约 30 mm 内半径 最小 约 35 mm (取决于刃半径和工件数量) 最大刃厚 约 3 mm 铣削电机 2 x 0.4 kW, 10950 o/min. 除尘 1 x 直径 80 mm 工作高度 900 mm 半径 3 mm 模
静态轮廓修整机,用于将边缘倒圆角到软成型或后成 面板。 该机器具有跟踪辊和修整电机,可进行对称和非对称 印工作(通过PLC控制)。 为了进行精加工,还额外建立了一个抛光刷。 最大工件厚度:55 mm。 最大工件宽度:80 mm。 最大剖面深度 80 mm。 最大边缘厚度:3 mm。 电机:0,5 kW
Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+