二手 AMADA 出售

品牌：天田 年份： 1996 型号： ITPS2 50-12 生产时间：68162 应用类型：弯曲 位置： 波兰 机器类型：折弯机 可用性：立即 技术信息 一般数据 测量宽度： 2200 MM 测量深度： 2500 MM 测量高度： 2100 MM 机器重量： 2610 KG 控制单元 品牌：天田 型号： 操作者 OP2 主驱动器 压力： 500 KN 弯曲长度： 1200 MM 轴数：4 媒体 主电子连接：400V / 50HZ 附加信息 机器优势 技术机器优势： - （Y， X， R1， R2） - 喉部：400毫米 - 最大行程：100毫米 定性机器优势： - 机器连续运行，准备进行测试�

冲压力：100T 弯曲长度： 3100 mm 行程： 200 mm 4轴 重量：6750 kg

压力/折弯机 AMADA HFE M2 1003 弯曲长度 3100mm 压力/德鲁克 100吨 数控 4 轴 / 数控 4 轴 制造年份。/ 建造年份 2012.10 条件/条件：非常好，准备操作/非常好，准备立即使� � 不包括弯曲工具/不带弯曲工�

Description: 100 ton power Total bending length 3,100 mm Distance between uprights 2,705 mm Gooseneck depth 420 mm Motor power 11 kW Apron travel 200 mm 7 axes Y1 Y2 X1 X2 R Z1 Z2. CNC OP 2000. Sick' gate weight approx.: 6,500 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,090 x 2,635 mm

Description: Serial number 44731012 , Cutting capacity round material diameter: 4006 mm , Square material cutting capacity: 400 x 400 mm , Maximum loading capacity of the machine: 2500 kg , maximum loading capacity of the roller conveyor: 2000 kg/m Minimum remaining workpiece length to ensure the clamping wheel of 10 mm: 76 mm , Minimum workpiece width for detection: 30 mm weight approx.: 3,000 kg, Approx. Onsite Dimension. (l x w x h): 9,000 x 2,400 x 2,000 mm

Description: 125 tonne power Total bending length 3100 mm Distance between uprights 2705 mm Gooseneck depth 420 mm Motor power 11 kW Apron travel mm 200 OPERATOR digital control. 3 axes Y X1 X2. New tooling line weight approx.: 6,600 kg, Approx. Onsite Dimension. (l x w x h): 3,800 x 2,090 x 2,635 mm

Description: Serial number 555123 minimum outside diameter of the workpiece 100 mm , maximum outer diameter of the workpiece 480 mm , maximum length of the workpiece 11.5 m total power requirement: 7,5 kW, weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 12,000 x 4,000 x 2,700 mm

Description: Machine Specifications: Max. Sheet Dimensions: 5040 x 1550 mm Max. Sheet Weight: 330 kg Max. Slide Stroke (X): 2520 mm Max. Stroke of Laser Head (Y-Axis): 1550 mm Max. Stroke of Laser Head (Z-Axis): 300 mm Max. Cutting Speed X and Y Axis: 20 m/min. Speed Rapid Transport X: 80 m/min. Speed Rapid Transport Y: 80 m/min. Speed Rapid Transport Z: 60 m/min. Positioning Accuracy: ± 0.01 mm/500 mm Repeatability: ± 0.005 mm Table Height: 820 mm Part Door Dimensions: 550 x 1550 mm Power Supply Voltage: 200 V (± 10 %) AC Mains Frequency: 50/60 Hz (± 1 Hz) Installed Power: 10 kVA, 3 phases Compressed Air Supply (Cutting Gas): 1000 l/min. Compressed Air Supply (No Cutting Gas): 250 l/min. Dimensions (LxWxH): 2500 x 5654 x 2275 mm Type ,Numerical Control: FANUC FS-160iLA Controlled Axes:  ,X, Y, Z (3 axes controlled simultaneously) Programming Metho ...

Description: Serial Number: 097 Working details: , Working Area: , X: 3070 , Y: 1550 mm , Axis displacement ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  ,  , X: 3420 , Y: 1550 , Z: 200 Cutting speed: X,Y: from 0 to 20 mt/min , Max. weight on the table: 840 kg , Assist gas control: Automatic , Max. working height: 840 mm , Weight of machine: Approx. 12.000 kg (excl. dust collector, cooler and changeoderver) , Power requirement: AC 200/220V ±10% 50/60Hz 27 Kva (excl. dust collector, cooler and pallet changer) , Laser  , Model: AF 4000 i-B Maximum Power 4,000w Frequency: 5 to 2000hz Laser Type: Co2 Circular Polarisation , Laser gas consumption Approx. 10 lit./min. Cooling water flow 160 lit./min. Power requirement AC 200/220V ± ...

Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...

Description: YOM 2011 Serial Number: 012 Resonator: AMADA FANUC AF4000i-B Maximum power: 4kw Working Hours: 32.000 approx Control AMNC-F Travels: X:3070 mm Y:1550 mm Z: 200 mm Material thickness: Iron 20 mm Stainless steel 16 mm Aluminium 10 mm No. of pallets: 20 Gas control: Automatic Max. piece weight: 840 kg Spindle speed: X: 114 mm Y 114 mm Z: 60 mm Cutting speed: X, Y 0 to 20 m/min Power requirement: 82 kva 400v (50 hz) resonator included Air requirement: 1420 l/min (machine only) Includes: Pallet changer, ,Dust collector and Chiller , Machine dimensions: , Machine 9903x2778x2200 (exc. Pallet changer, ,Dust collector and , chiller) , , weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 11,500 x 5,130 x 2,350 mm

Description: Serial  , ,Number: 4558175 Working Hours: 31500 Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

Metal band saw blade, band saw blade, metal saw band -Metal saw band: SG 2/3P x 0.9 unused -Length: 4115 mm -Weight: 1.2 kg

Clamping device table band saw, wood band saw, firewood saw, automatic band saw, material positioning, band saw rolls, band saw roll -Band saw roll: made of Amada HA-400 W metal saw -Diameter: 595 mm -Shaft: Ø 50 x 70 mm -Recording: M16 x 2 -Dimensions: Ø 595 x 193 mm -Weight: 51 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: AMADA, horizontal band saw automatic band saw type HK-800 -Equipment: driven roller conveyor, stop system, -Saw drive: 5.5 kW -Cutting capacity flat: 90° 810 x 580 mm / 45° mm -Cutting capacity round: 90° 580 mm / 45° mm -Saw band speed: infinitely adjustable -saw band: -Coolant device: cooling water -Setting dimensions: 22000 mm/2000/H2410 mm -Transport dimension: 13 loading meters -Weight: kg

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

cutting diameter: 530 mm saw band length: 6670 mm cutting width: 530 mm Control: CNC main drive motor: 7,5 kW roll guideway: optional total power requirement: 13 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m Fully automatic band saw roller conveyor Dimensions: 4000x700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mm saw band length: 3505 x 32 x 0,95 mm cutting width: mm Control: total power requirement: 8 kVA weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1937 x 1850 x 1570 mm NC-controlled band saw machine for series cuts with different lengths and quantities for all materials. Technical data: Cutting capacity Cutting diameter 250 mm Belt speed 24 - 90 m/min. - stepless Saw band dimensions 3505 x 32 x 0.95 mm Belt drive 3.7 kW Table height 550 mm Equipment: Chip conveyor Coolant device Runway Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

进给长度： 0-800 mm ： ： 最大 250mm Schnitt 自动： 机器重量 约： 1,5 t 机器尺寸： 2000 x 1750 x 1350 m

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

板材宽度： 3050 mm 板厚： 12 mm： 1000 mm 0： 16 St.machine 重量 ab.： 7.260 kg 尺寸： 3560 x 1820 x 1960 mm

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...

sheet width: 3050 mm plate thickness: 6,35 mm thickness at Niro-steel: 4,0 mm down holder: 16 Stück table length: 575 mm Control: AMADA cutting angle: 40° - 2°20 ° 0: 305 bar oil volume: 100 ltr. total power requirement: 5,5 kW weight of the machine ca.: 6150 kg range L-W-H: 3790 x 2090 x 1860 mm maintained condition () Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal bla ...

CNC controlled backgague CNC knife play adjustment CNC cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3600 mm Depth: 2050 mm Height: 1950 mm Weight: 6,3 ton Number of sheet holders: 16x

Type: HFT 130-3 3 axes: Y1 / Y2 / X Capacity: 130 ton x 3140 mm Backgauge: CNC Control: Graphique CD2005 Passage between uprights: 2700 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 420 mm Table width: 90 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Length: 3995 mm Depth: 2020 mm Height: 2820 mm Weight: 8150 kg

Amada Promecam RG 50 ton x 2100 mm Capacity: 50 ton x 2100 mm Passage between uprights: 1690 mm Max stroke: 100 mm Max distance between table -- ram: 300 mm Depth of throat: 400 mm Table width: 60 mm Locking speed: 48 mm/sec Working speed: 14 mm/s Returning speed: 70 mm/sec Electric motor (power): 7,5 HP Length: 2100 mm Depth: 1400 mm Height: 1850 mm Weight: 3 ton

Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton

Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton

plate high hold system CNC controlled backgague manual knife play adjustment manual cutting angle adjustment Cutting length: 3050 mm Max sheet thickness st 45: 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,4 - 2,20° Electric motor (power): 5,5 kW - 7,5 hp Length: 3560 mm Depth: 1990 mm Height: 1955 mm Weight: 6,3 ton High hold system: yes Number of sheet holders: 16x

X-travel: 2520mm, y-travel: 1550mm, z-travel: 300mm, max. sheet thickness: 12mm, max. workpiece weight: 330kg, cutting speed: 0-20m/min, controls: AMNC-F, connected load: 70kVA, weight: 7.5t, operating hours: 23,600h, with Resonator Fanuc AF 2000 E (LU 2.5), laser power: 2500W, laser wavelength: 10.6μm, with adaptive optics (Active Cut), sensor cutting head HS-2003, high-pressure cutting device (Clean Cut), aluminium cutting device (Alu Cut), focus point adjustment, gas pressure adjustment, resetting device, parts flap, extraction system, cooling unit, beam path rinsing and diode laser for positioning.

X-axis: 2520mm, y-axis: 1550mm, z-axis: 300mm, max. sheet thickness: 12mm, control FANUC 160i-L, FANUC Laser C4000, Keller dry separator Vario T 1.5, cooling Riedel. The machine is fully functional and can be inspected on site during operation.

Max. cutting diameter: 250mm.

Including documentation, tools, lubricants and roller tables.

Punching capacity: 300kN, max. sheet dimensions: 1270x3660x6,4mm, max. table load: 100kg, connected load: 35kVA, length: 3778mm, width: 4601mm, height: 2245mm, weight: 13.5t.

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

Working hours machine: 19744 (17.01.2024) h Working hours laser on: 9440 (17.01.2024) h Working hours beam on: 6018 (17.01.2024) h Laser power: 6000 Watt Control: AMNC 3i Working range laser: 3070 x 1550 x 100 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. copper: 15 mm Max. brass: 12 mm Length: 10136 mm Width: 2840 mm Height: 2432 mm Machine weight: 9500 kg

Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg

Working hours machine: 36101 h Max. punching force: 200 kN Working range punching: 2000 (4000) x 1270 mm Control: Fanuc 18-P Length: 6190 mm Width: 5000 mm Height: 2450 mm Machine weight: 12000 kg

This AMADA Europe 255 punching machine was made in the year 2003 in France and has 39000 production hours. It is equipped with a Fanuc Series 18i - P control unit. The machine has a punching force of 200 kN.

This AMADA Europe 245 Punching machine was manufactured in the year 2001 in France. It is equipped with a FANUC Series 18 i-P control unit. The machine has a punching force of 200 kN.

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 15062 production hours, of which 6815 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

This AMADA LC 2415 alpha 4 NT Laser Cutting machine was manufactured in the year 2011 in France and has 11750 production hours. It is equipped with an AMADA AMNC control unit. The machine has a laser power of 2,5 kW.

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

This AMADA LCV 3015 3KW + Automation/storage Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours, of which 7830 are cutting hours. It is equipped with a Fanuc FS16LB EXP control unit. The machine has a laser power of 3 kW.

This AMADA LC 1212 A3 Laser cutting machines machine was manufactured in 2005 in Japan and has 39506 production hours. It is equipped with a FANUC control unit. The machine has a laser power of 2,0 kW.

This Amada LC 2415 A3 Laser cutting machine was manufactured in the year 2002 in Japan. It is equipped with a Fanuc Series 160i-L control unit. The machine has a laser power of 2,0 kW.