贴面机 二手 出售

制造商： Josting ， 类型： QFS 800， 年份： ca.90， 横切断头台： 是， 切割长度 mm： 2800， 带材宽度最大 mm： 800， 对准灯： 是， 电机驱动的近焦光束： 是， 压力光束： 是， 所需空间 L x W x H mm： 5000 X 1200 X1600， 怀特 约 kg： 2000， 免费文本：约90

 ... 更多信息

 ... 更多信息

制造商： Josting， 类型： QFS 800， 横切断头台： 是， 切割长度 mm： 800， 工作高度 mm： 45， 调整光线： 是， 电机驱动的近焦光束： 是， 所需空间 L x W x H mm： 1200 x 800 x 1600， 怀特 约 kg： 500， 伏弗隆莫格利奇： 是� ... 更多信息

制造商： Fischer Rückle， 类型： FZK， 年份： 1998， 工作宽度 mm： 1200， 单板厚度最小 mm： 0,5， 单板厚度最大最小： 1,6， 进给速度最大米/分钟： 10-60， 进料速度连续可调： 是， 白胶连接： 是， 蓝色冷却： 是， 总功率千瓦： 约 10， 怀特约 kg： 1500， 年份 ：1998

Description: GUILLIET 76 PR GuillotineApprox. Onsite Dimension. (l x w x h): 1,480 x 1,840 x 1,400 mm, weight approx.: 800 kg ... 更多信息

Description: veneer cutter made in Germany after pneumatic fixation cut up to 3000 mm veneer lengthApprox. Onsite Dimension. (l x w x h): 3,750 x 100 x 1,200 mm, weight approx.: 300 kg ... 更多信息

Description: Material: Wood and hard plastic Angle Adjustment: 45° to 90° adjustable Max. Cutting Width: 100 mm Max. Cutting Height: 152 mm Approx. Onsite Dimension. (l x w x h): 400 x 250 x 400 mm, weight approx.: 50 kg ... 更多信息

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kgApprox. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

板尺寸： 2.500 x 1.250 mm日光开口： 400 mm日光数量： 4 St.Heating： elektrisch 比压： 2,9 kg/cm²总压力： 90 to电机输出： 2,2 kW机器重量 约： 约2.500 kg ... 更多信息

板尺寸： 2200x1100 mm日光开口： 400 mm日光数量： 1 St.电机输出功率： 12 kW ... 更多信息

Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t. ... 更多信息

Working width: 800mm, nominal current: 2A. ... 更多信息

Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. ... 更多信息

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Basic machine complete with: - with automatic feed - circular saw unit 2,2 kW (3 hp) with pneumatic height adjustment - Axial mechanical adjustment of the saw, adjustment field stepless from 0 to 2 mm - high-precision double ball bearing slides for the moving parts - pressure beam controlled by two lateral pneumatic cylinders, equipped with torsion bar - plastic cable chain - connecting piece Ø 120 mm - HM- saw blade Ø 180 mm - Lubrication unit with filter complete with gearbox and pressure gauge on the air line - service tools - safety devices type: FILA 31 Usable cutting length 3.100 mm type: FILA 37 Usable cutting length 3.700mm type: FILA 43 Usable cutting length 4.300mm

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

切割长度： 3200 mm压力行程： 100 mm.后进给宽度： 25 - 800 mm压力梁机械式 2 手操作光束安全电动后围� ... 更多信息

切割长度：2300 mm最大包装高度：80 mm。液压梁2 手操作光束安全电动后围� ... 更多信息