碎纸机 二手 出售

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti -  ...

SINGLE SHAFT SHREDDER, V Rotor width 2.000 mm. 78,74 Rotor diameter 500 mm 16.69″ Motor power 90 kW n.112 knifes 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on  ...

小巧但非常坚固和强大的碎纸机，适用于各种任务，� ��旧电缆，塑料木材等。带液压、电子控制进给。驱� �功率 18.5 + 2.2 kW （转子 + 进给）。转子轴带有用于连接冷却装置的连接（例如� ��当用于旧的NYM电缆时。 这台机器从我们的演示机器库存中很少使用。该机器� ��供一年的二手机器保修�

机身发动机取代了斯堪尼亚 DC13-071A，无涡轮增压器，EGR 冷却器 +软管，偏压器，控制器 安装在克利曼破碎厂。 图片只是样品图片！ 旧发动机必须没有破损和裂缝。 价格仅应要求提供 断续器 Motoren-Instandsetzungs-werk GmbH 西北环 8 D-27404 泽文/德国 电话：0049（0） 4281-950583 传真： 0049（0） 04281-950585 nfo@miw-泽�

MR 40-80是一款功能强大的单轴撕碎机，适用于许多任务� �例如电缆的预碎，电子废物的破碎，废旧塑料，木材 等。 与其他单轴机器不同，IRS的撕碎机有两个而不是一个� ��列的定子刀，以获得更好的产品质量和更高的小时� �量。转子叶片的优化布置也降低了能耗。 水平作用的液压推进器具有可更换的耐磨条，并调节� ��子上的接触压力。此外，还有可互换的筛网，用于� �径为10 mm的特殊任务。 根据要求，撕碎机可以针对冷却转子轴进行优化，并� ��有耐磨保护装甲，液压离合器，远程服务和其他选� �，适用于相应的应用。 规格： 刀具数量： 35 + 2 （转子 + 定子） 转子转速： 85 rpm 转子 ， 长度： 400 mm， 800 mm 电机：西门子 37.0 kW + 2.2 kW，400 V 控制：西门子 PLC S7-1200  ...

彻底检修的斯堪尼亚替换发动� ... 更多信息

二手厨余碎纸机，带变速箱和电机11 kw刀片18 mm 2� ... 更多信息

TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...

4-SHAFT SHREDDER 15 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 7,5 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

4-SHAFT SHREDDER 22 KW, sturdy carbon steel electrowelded structure, anti-wear side walls, loading hopper, shredding surface 600 x 800 mm., n.4 x 800 mm long shafts, n.30 anti-wear cutting knives 20 mm thick, n.30 routing disks, n.2 planetary gearboxes, n.2 x 11 kw motors, inversion on overload, n.18 rpm average, bespoke screen size, extraction prepared for connection with blowing system, SIEMENS LOGO PLC with simple panel for complete control, CE compliance, Users manuals.

SINGLE SHAFT SHREDDER, V-rotor width 600 mm. diameter 260 mm, Rotor speed 80 - 125 rpm, Throughput rate 100-150 kg/h depending on material and screen, Drive power 22 kW, Max. number of knives 28 pcs 40 mm., screen size bespoke to project :15 to 40 mm, Hopper 600 x 800 mm, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmiss ...

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

SINGLE SHAFT SHREDDERS SPECIAL FOR PLASTIC SCRAPS, form 600 mm to 2.000 mm wide rotor., Adjustable counter-knives, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti-vibration, Machine prepared for discharge by conveyor belt, Bolted and hardened rotor shaft on gear box side (ant ...

哈特尔·普拉尔穆勒·普拉穆赫勒·普拉尔布雷彻·布� �彻·布雷彻 型号： RMA 405 电脑 破碎机： PC205 进气口 1450x850mm 链式机箱上的移动 带进料通道/预筛、传送带和永磁分离器 驱动 CAT 3408 柴油发动机� ... 更多信息

LINDNER VEGA SINGLE SHAFT SHREDDER, type VEGA 1.650, 90 kw drive, rotor width 1.650 mm., loading hopper : 2,6 m3, shredding surface 1.100 x 1.800 mm., rotor width 1.630 mm, 434 mm Ø, 6 Bar ram, weight : about 8.500 kg, dimensions : LxWxH 3,4 x 2,35 x 2,81 mt., This machine is offered reconditioned, See how we recondition [HERE](https://www.germanplast.eu/pages/photo-gallery), installed power : 90, width: 1.650 mm.

这台机器有两个电机，每个电机11千瓦，用于轮胎回� �，配有料斗支架和控制面板� ... 更多信息

VECOPLAN VAZ 220/200 KNF, single shaft shredder for plastics, constructed in 2000, imfeed width 2200 mm, working width: 2000 mm, Rotor Ø 495 mm, n.56 knives size 60 x 60 mm., Rotor speed 125 rpm, 132 kW drive, 400V 50 Hz, Machine weight : about 14 tons, Upper ram, feeding hopper, various screens available, Electrical panel, Users manual, drawings available, This machine is offered totally reconditioned, (last group of photos is of a twin machine just reconditioned), width: 2.000 mm. (78.74), Power: 132kw

WEIMA SIZE REDUCTION LINE, Including :, loading conveyor belt, construction year 2002, WEIMA WLK 6 single shaft shredder, construction year 2005, rotor width 800 mm., rotor diam. 370 mm, 45 kw drive, screen, extraction belt, magnetic drum, WEIMA GRANULATOR NZ3 10/600, soundproof cased, construction year 2005, 22 kw drive, extraction blower, pneumatic system, Big Bag filling station

制造商： 德尔塔克斯 压降：液压压紧 尺寸（长 x 宽 x 高）： 2010 x 902 x 1500 mm 刀长： 610 mm 1/4 开口时的行程数：四分之一开口时 40 次切割 全开时的行程数：全开时 12 次切割 测量开口： 330 mm 切削力 ： 206 吨 驱动 ： 11 kw/32 CEE 插头 重量： 约 2250 公斤 带液压支架的Deltax_DTX600S （新机器） DTX 600S 的切削力比标准德尔塔克斯 DTX600 高出 20%。 这是通过安装更大的气缸和使用较小的第二个泵来实� ��的。 使用较大的第一泵来保持相同的切割速度。 所有其他修改都用于加固机器以应对额外的动力。 由于加固修改和更大的柱塞，重量增加约为250 kg。 替代产品： 德尔塔克斯 DTX600 差异 切削力：172吨|重量：2000Kg |所有其他技术数据都是相同的 -- 缺货 -- 交货时间： ...

制造商： 麦克因泰尔 刀长： 150 毫米 测量开口： 105 mm 切割能力：25吨 圆铁 ST 37： 直径 25 毫米 1/4光圈冲程数：20/分 1/2开孔行程数：12次/分 全开时行程数：9次/分 尺寸 （ 长 x 宽 x 高 ）： 660 x 520 x 620 mm 重量： 150 公斤 驱动电压：1.5千瓦/230伏 操作：脚踏�