生产厂家:
(品类: 2500)
Metalref锅炉型号BRIK FIRE在木制废料中燃烧 最高工作温度 90° 潜在产量 78,000 Kcal/h 爆发潜力 95,000 Kcal/h 主要燃料 Chips/Sawdust 配有自动液压给料 ... 更多信息
This DÃRR ECOCLEAN 70c washer machine was built in the year 2007 and has 38472 production hours. ... 更多信息
This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm. ... 更多信息
This Jeti 3300 Industrial Printer was manufactured in the year 2007 in Canada. The machine has a psi of 100-150 min-max. ... 更多信息
Description: Disc diameter 1500 mm With access rampApprox. Onsite Dimension. (l x w x h): 3,900 x 1,600 x 800 mm, weight approx.: 400 kg ... 更多信息
This Durma RP9 1250x20 punching machine was made in the year 2007 in Turkey. It is equipped with a Siemens 840 control unit. The machine has a punching force of 200 kN. Set of tools included. ... 更多信息
This HACO PM 310V-3 Punching machine was manufactured in the year 2007 in Belgium. It is equipped with a TPC 50 Graphics control unit. ... 更多信息
This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. ... 更多信息
Description: The foaming machine described below is designed for foaming sandwich elements. PRODUCT Panels for cold rooms DIMENSIONS Length x width max. 2,400 x 1,350 mm min. 600 x 180 mm Thickness: 40 ... 120 mm CAPACITY Press type: 2 + 2 Press table dimensions: 6,500 x 1,600 mm Number of press tables: 4 pieces , Occupancy of press table: 1 piece Extension of pressing tables: 60 sec Curing time / dwell time in the press: 15 - 45 min Occupancy rate: 0.9 Shifts: 2 pieces , Working time per shift: 8 h Panels per shift: 48/72 pieces Depending on foam thickness and raw material GROUND DATA (this set-up) Mixing ratio: 100 : 140 (polyol : isocyanate) Dosage - max: 1100 g/s per mixing head Specific gravity: Polyol 1.0 Isocyanate 1,2 Density: 45 - 60 kg/mÑ Start time: 20 sec (Other raw material data can of course be used for other applications) SYSTEM COMPONENTS Components of the ...
Description: Article number: 0701 138 X Rated power: 1200 WApprox. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 20 kg ... 更多信息
Description: Manual monorail system , Pneumatic switch points 2x jib crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x travelling crane with lifting capacity 250 kg incl. GIS electric chain hoist 4x drop section Floor area: approx. 65 x 30 metres Structure height: approx. 4.5 metres Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
13x 码头/干船坞挡泥板(气动型) 总数量: 13 件 大约尺寸:深1.5米长2.75米 其他项目包括: 锁链和镣铐(并非所有都有锁链和镣铐) 请注意: 此拍品需支付 10% 的买家附加费,可能适用增值税,并按奖励出售。 类型 码头/干船坞挡泥板 年 2008
用于干燥和筛分沙子的振动机。 该机器由安装在输送机元件上的焊接结构组成,并配 2个电动不平衡电机作为驱动器。 在输送线的末端有一个内置鼓风机的电热空气发生器 在输送槽下方,筛分箱安装在出砂口区域。 由于弹簧元件上的弹性轴承,机器向基板发出的动态 仅为100 N左右。 振荡宽度和输送能力可以通过调整电机上的不平衡来 整。由于设计简单,机器几乎无故障,免维护。 静态变频器的控制范围为 10 至 32 Hz 长度: 3.5 米 宽度: 1.2 m 高度 : 1.4 m 重量:220公
数量 1 二手激光管壁厚测量单元 制造:味精机械有限公司 建造时间:2009年 使用激光技术测定壁厚。 最大放大镜直径: 85 mm (可修改) 壁厚: 11 – 14 mm 放大镜长度: 250 – 600 mm 操作速度:1.3米/秒 功率:6.5 kW,400 V,21 安培,50 Hz 气压:6.0 巴 供货范围:移除装置 送料器 锯入口通道 垂直驱动器 垂直和水平矫直机 重型金属圆锯 吹出和抽吸装置 称重装置(计算) 集水区 放大起重机 吸入装置 液压集料器 收集
This Jeti 5000 Vinyl Printing Machine was manufactured in the year 2009 in Canada. The machine has a psi of 100-150 min-max. ... 更多信息
有现货 1 x 从未使用过的液化空气减压阀 DCn 300/3 适用于所有工业气体,包括氧气、乙炔和丙烷。无腐 性和有毒气体除外。 该设备从未使用过,仍在原始包装内。 最大流速:350 Nm3/小时 (N2) 最大入口压力: 50 巴 调节出口压力: 1 至 18 bar
This ERMAKSAN RPP 12730 Punching machine was manufactured in the year 2009 in Turkey. It has 2 axis. The machine has a punching force of 300 kN. ... 更多信息