高级搜索
8035 结果
生产年份: 2005
二手
Calibration and fine sanding machine, wide belt sanding machine Kundig Brilliant with electronic segment sanding pad, inclined sanding unit and lacquer sanding. A video of the machine running can be sent on request. Ideal automatic sanding machine for interior finishing companies, also suitable for intermediate paint sanding Bind machine with combination unit and electronic link pressure beam Edge segments can be switched on and off Segment width of pressure beam 35mm Pneumatic Calibration Roller Grooved Rubberized Roller with Grain Compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Webbing feed infinitely variable from approx. 3 to 15 m/min Strip blow-off device workpiece-controlled Constant table height approx. 900mm due to adjustment of the upper part of the machine, thus can also be integrated into grinding lines Feed bel ...
生产年份: 2007
二手
Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC
生产年份: 2007
二手
SPECIFICATIONS: Equipment: Motorized loading roller conveyor Motorized roller stroke Slide arm with 7 pneumatic grippers Panel saw with a cutting width of 4500 mm Door pad on felt-covered platforms Sliding arm with 8 pneumatic grippers, connected by a continuous rod Lateral alignment device Panel saw width 2500 mm Vibrating chute for picking up and removing waste Shredder WEIMA model WLH300, built in 2007, motor 18.5 kW Unloading gantry 3ERRE AUTOMAZIONI model 1131, built in 2007 - length approx. 13000 mm Pneumatically operated mechanical gripping unit Motorized roller conveyor width 1700 mm length 4000 mm Side stop with idle rollers, side aligner, retractable front stop Motorized roller conveyor, width 1600 mm, length 5000 mm, concealed front stop 2 motorized floor roller conveyors, width 1600 mm, length 5000 mm 4 floor roller conveyors, width 900 mm, length 5000 mm ...
生产年份: 1995
二手
规格： 2 个卷轴（I. 85 Shore;II. 60 Shore） 工作宽度 mm： 1100 砂带尺寸 mm： 2200 x 1130 装机容量KW： 12.5 + 0.75 Variator 配有： - 进料辊压靴 - 出口处的旋转鼓风机装置
二手
SCM 齐平式刨床 L' Invincibile 2150 型： - 400mm刨床，工作台长度2150mm - 厚度刨床，手动工作台升降 机器不符合CE标准，用于出
生产年份: 1998
二手
二手
规格： 工作台尺寸 mm： 2540 x 740 主轴直径 mm： 35 主轴倾角：0°-45° 转速：3000/10000转/分 电压：3800伏 配备： - 用于主轴行程和主轴倾角的电子编程器 - 4辊进
二手
生产年份: 2005
二手
规格： 工作区域 X：4000 工作范围 Y：1300 Z型工作范围：270 C轴 换刀工位：24 仿形铣削单元 制冷机组 用于钻锁的双面钻孔单元 主电机功率KW：11 工作台：8个控制导轨 废物输送机 Xilog Plus PC 软件控制 真空泵容量 m³/h： 250 保护 重量约kg：5000
二手
生产年份: 1999
二手
规格： 最大锯片直径： 400 mm 锯片倾斜度：0° - 45° 修边车架长度： 3800 mm 得分能力：KW 0.75 划痕直径： 120 mm 最大切割高度： 130 mm 装机功率：5.5KW
二手
CNC processing centre with 5 axes Brand: Cosmec Type: Conquest 715 New machine Just an example for a configuration, other equipment is available on request: High-precision CNC - centre with camera centering system. Ideal machine for milling works in digital print, wood- and plastics as well as in the advertising technique Gantry drive system 5-axis main spindle complete interpolating Moving route: - X - axis 4.850 mm - Y - axis 2.630 mm - Z - axis 880 mm Working table: Vacuum grid table system, made out of Sandwich-Bakelit and, consisting of: - 1 Upper plate with grid 50 mm, also the use of COSMEC vakuum cups is possible (vacuum cups optional available) - 1 Lower plate with rectangular chanels for ideal vacuum distribution Dimensions: X - axis 4.210 mm Y - axis 2.210 mm Table can be split in 2 working fields Each field with 3 workpiece stops in X - ...
生产年份: 2001
二手
生产年份: 2003
二手
CNC working center Weeke Type: Professional BHC 600 Year of construction: 2003 TOOL CHANGE SPINDLE 12 KW - HSK F63 INCL. LIQUID RECIRCULATION infinitely variable 1,250 - 24,000 rpm. programmable max. 9/12 kW in continuous/intermittent operation (S1/S6-50%) WORKING LENGTH X AXIS 7250 MM WORKING WIDTH Y-AXIS 1300 MM AUTOMATIC TOOL CHANGE MAGAZINE FOR 8 PLACES (PLATE CHANGER) AUTOMATIC TOOL CHANGER M. 18 MAGAZINE PLACES Automatic tool changing system in the X direction riding on the machine stand AGGREGATE INTERFACE F.D.MAIN SPINDLE, To accommodate the adapter units including interface Pneumatic and swivel drive C-axis with Torque entrainment and 3-point support VERTICAL DRILLING UNIT, 26 SPINDLES Drive: 1.5 kW 11 spindles with step 32 mm in X-direction 11 spindles with step 32 mm in Y-direction 4 spindles with step 50 mm in X-direction Spindle type: indiv ...
生产年份: 2018
二手
There are two separators available, volume flow: 3600m³/h, total pressure: 4000Pa, operating temperature: 20°C, connected load: 11kW, operational hours counter: 5994h.
二手
CNC processing centre Brand: TecnoTeam Type: Enjoy Basic 3 Achsen New machine Save your space: Standing upright means progress for human! - With a vertical CNC machine you save a lot of space: Wether for consuming material or a further machine, you have more space to use in your storage. Easy machine use: - TPA makes the use very easy, you find this software at several well-known machine brands - You see the programmed processings on a virtual display, no matter which process: if circle, bow, linear millings or drillings, - Create job lists in the CAM - Forget the calculator, the machine calculates for you. - For this software several genious tips and tricks are possible. With realiability to success: - Technoteam uses High-Quality components from well-established producers. - We modify the machine exactly to your needs: If you process massive wood, you get a str ...
生产年份: 1993
二手
X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t.
二手
Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range ...
生产年份: 2001
二手
二手
CNC processing centre Brand: Vitap Type: Galileo 2 New machine Create great things on small space - the best kind of using 5m² production space With this 3-axis machine you can drill, mill and groove in throughfeed. Vitap Bar Nesting - efficient and time saving - This patented Software processes whole corpus elements out of one longer workpiece. - Just insert the workpiece and when you take the first finished element, the machine contues with the processing of the next element Easy beginn with CNC programming: - TPA makes it easy: drillings, grooves, linear millings, form millings or the millings of letters - The CAD Software shows the processings on a virtual workpiece - Good overview about all processings on the single sides of the workpieces - Mirror function for parallel processings on other positions - Choose reference points via entering the exact position ...