轧机

速度：通过新型变频器无级变速 固定滚子： 1 - 14.9 rpm = 2 - 28 m/min 调节滚轮： 1 - 17.5 rpm = 2 - 33 m/min 通过蜗轮蜗杆手动驱动进行间隙调节，可转换为电动� ��隙调�

可用的饼干磨 卷筒直径 600 x 800mm 附说明�

提供 35 铣床底架 更多细节在附件描述中�

贝尔斯托夫裂解磨机， 状态极佳 以下工作已经完成： 新型滑动轴承， 新型滚子罗纹， 新辊磨， 新型润滑脂泵、制动缸、 新的安全杆， 新输送�

贝尔斯托夫裂解破碎机，辊径600 x 800mm 附上说明�

卷轴：直径300 x 600 毫米 滚筒表面：光滑 轧辊类型：中心钻孔 间隙调整：曼努埃尔 发动机： 22 kW

布祖鲁克 14231 2010年CE转换 减摩轴承 电机 ： 55 kW 电动间隙调节 底�

减摩轴承 电机： 132 kW 电动间隙调�

布祖鲁克 14821 钻孔辊 减摩轴承 发动机： 210 kW 电动间隙调节 底�

roll diameter: 350 mmroll length: 700 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 2x 15 kWCondition: new, with CE mark,Specification: Two Roll Mill 350 x 700 mm - new- cylinder diameter: 350 mm- cylinder length: 700 mm- cylinder boring: peripherally drilled- cylinder bearings: with grease lubrication- 2 cylindera chromed- nip admustment: hydraulically- new hydraulic unit- tipper guiding plates of nylon-polyethylen-material- stainless steel tray- bi-directional bars- AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz- bevel gearboxes of transmission: 2 pcs- painting: with RAL colours acc. to customer’s specification- complete machine protection with stainless steel carters- new electric cabinet- new electrical system- new machine on-board system- new control panel Touchpanel 7- PLC system: 1 piece, brand S ...

请参阅请求中的代码 1024 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1034 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 350 mmroll length: 700 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 22 kWCondition: used, overhauledSpecification: Rolling mill 350 x 700 mm - second-hand model with motor on the side of the rollers- roller diameter: 350 mm- roller length: 700 mm- Rollers: with core bore, with central chamber for water cooling- Fixed friction between the rollers- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tilting guide plates made of steel- New roller container, made of stainless steel, for holding mixture- bi-directional bars- Safety brake for NOT stop- AC motor: 22 KW - 400 Volt - 50 Hz- New frequ ...

请参阅请求中的代码 1020 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

带手轮的间隙调整手�

请参阅请求中的代码 1026 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1079 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 560 mmroll length: 1500 mmrolls drilled: Peripher Nip adjustment: hyraulisch 0total power requirement: 150 kWCondition: used, completely overhauled, with warrantySpecification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine- roll diameter: 560 mm- roll length: 1500 mm- model: Duplocom / pluridrive- Peripherally drilled rollers for water cooling- Cardan joints between gearbox and rollers- Individual drive for the rollers, for variable friction- hydr. gap adjustment- Hydraulic unit- Tilting steel guide plates- rollers mounted on roller bearings with appropriate lubrication- rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit- One gearbox- two individual drives, each with: 2x 75 kW - 400 V - 50 ...

请参阅请求中的代码 1077 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1089 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1090 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1027 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1033 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 550 mmroll length: 1500 mmrolls drilled: peripher Nip adjustment: hydraulisch 0total power requirement: 90 kWCondition: used, overhauled Specification: rolling mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- monoblock - motor under the rolls- Fixed friction between the rolls- Rolls: peripherally drilled, for water cooling- Gap adjustments: NEW hydraulic- Hydraulic unit: NEW- tiltable steel material guide jaws- Rollers: mounted on bronze bushes with oil circulation lubrication via pump- new ball bearing slewing rings for connection to water circuit- Safety brake for EMERGENCY STOP- New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture- Safety bars bi-directional- New electrical control cabinet with PLC system S7-1200 ...

roll diameter: 600 mmroll length: 1800 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch 0total power requirement: 132 kWCondition: used, completely overhauled, with warrantySpecification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers- Roll diameter: 600 mm- Roll length: 1800 mm- Roll core with central chamber for water cooling- Friction between the rollers- hydraulic gap adjustment: new- Hydraulic unit: new- Tilting guide plates made of steel- Rollers on bronze bearing bushes with recirculating oil lubrication via pump- Rollers with new ball slewing rings, make Maier, for connection to the water circuit- AC main motor: 132 kW - 400 V - 50 Hz- Safety brake for EMERGENCY STOP- Stainless steel roller container to hold the mixture- bi-directional safety bars- Visual indication of the gap between rol ...

请参阅请求中的代码 1063 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1064 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1067 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1072 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1076 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1071 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1073 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1074 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1075 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1056 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1060 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1085 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 400 mmroll length: 1000 mmrolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 400 mmroll length: 1100 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 2x 30 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

请参阅请求中的代码 1032 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: Hydraulisch total power requirement: 150 kWCondition used, refurbished, Specification Roll mill 550 x 1500 mm - used- roll diameter: 550 mm- roll length: 1500 mm- Variable friction ratio between rolls - cored rolls with central chamber for water cooling- nip adjustment: NEW hydraulical- hydraulic unit: NEW- tipper guiding plates- cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit- N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz- mill tray to contain compound- bi-directional bars for safety system- visualization display to monitor gap between rolls an ...

roll diameter: 550 mmroll length: 1500 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

请参阅请求中的代码 1025 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

roll diameter: 150 mmroll length: 300 mmrolls drilled: Flaschenhals Nip adjustment: hydraulisch total power requirement: 4 kWcondition: used, overhauledSpecification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers- Roller diameter approx.: 150 mm- roller length: 300 mm- Friction between the rollers- Rolls drilled with central chamber for water cooling- Rolls with new slewing rings, manufacturer MAIER, for water cooling,- Rollers mounted on bronze bushes with circulating oil lubrication via pump,- Gap adjustment: NEW, hydraulic and as emergency system- Hydraulic unit NEW- NUE Tilting guide plates- NEW safety cage- Safety brake for emergency stop- AC brake motor: 4 kW - 400 Volt - 50 Hz- new mixing tanks made of stainless steel for the mixture- Safety devices according to current EN 1417:3/2015- Painting: in RAL colours according to ...

roll diameter: 400 mmroll length: 1000 mmrolls drilled: Kernbohrung Nip adjustment: hydraulisch 0total power requirement: 45 kWCondition: used, overhauledSpecification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls- roll diameter: 400 mm- roll length: 1000 mm- rolls: with core bore, with central chamber for water cooling- Rollers mounted on bronze bushes with oil circulation lubrication via pump,- equipped with new slewing rings for connection to the water circuit- Gap adjustment: hydraulic, NEW- Hydraulic unit NEW- Tiltable guide plates- stainless steel roller container to hold the mixture- bi-directional rods- safety brake for NOT stop- AC motor: 45 kW - 400 Volt - 50 Hz- Painting: in RAL colours according to customer  ...

请参阅请求中的代码 1068 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

BERSTORFF GmbH 混合磨机，适用于所有类型的橡胶化合物 卷宽 120 厘米 卷直径 55 厘米 机器状况非常好�

请参阅请求中的代码 1041 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1028 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。

请参阅请求中的代码 1036 更多信息请访问我们的网页 G3 混合技术 - G3 STOCK 或 LinkedIn G3 STOCK 二手机器，可以按原样”购买，无需保修，或完全重� ��并保证为新机器。