柱式钻床

: 26 mm: 30 mm: 30 mmthreading in St 60: M 20 threading in GG 20: M 24 : MK 3 : 120-2.200 U/min.throat: 293 mm: 514x360 mm: 2 x 14 x 224 mm: 90/675 mmcolumn diameter: 115 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Utotal power requirement: 1,0/1,6 kWMachine height: 1865 mmweight: 380 kgStandard equipment:7 TFT LCD display with touch function: manual input of spindle speedSetpoint, actual speed display, integrated drilling depth display with touchZero point transfer, virtual drilling depth scale in the display, machineStatus displays and warnings in the display, service information, selectableUser language: DE / EN / FR / ES / IT / NL / RU- Thread cutting device, for thread cutting with stop, max. 6thThread / min (thread cutting performance dependent on spindle speed), thread depthadjustable via depth stop and in the TFT - LCD display (4 tools)- Infinitely variable speed setting b ...

钢制孔径（直径）： 26 mm喉部： 290 mm缸径： 160 mm主轴无级车削速度：120-2200 U/min机床重量 CA.： 460 kg机床尺寸 CA.： 500 x 800 x 1900 mm

: 26 mm: 30 mm: 30 mm: M 20 : M 24 : MK 3 : 120-2.200 U/min.throat: 293 mm: 515x360 mm: 2 x 14 x 224 mm: 90/675 mmcolumn diameter: 115 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,0/1,6 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads / min., (Tapping power dependent on spindle speed)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

钢内孔容量（直径）： 30 mm 喉咙： 290 mm 孔径： 150 mm 锥度 MK： 3 MK 工作台尺寸： 320 x 370 mm 螺纹镗孔直径： mm 进给量： mm/U 车削速度： 80 - 1400 U/min总功率要求： 2,0 KW机器重量 约： 0.35 t尺寸： 0.6 x 0.8 x 1.95 m柱式钻床具有以下特点：- 可变主轴转速- 机床轻�

bore capacity in steel (diameter): 40 mmthroat: 280 mmbore stroke: 180 mmtaper MK: 4 MKtable-size: 620 x 470 mmfeeds: 0,1 - 0,2 - 0,3 mm/Uturning speeds: 110 - 2900 U/mintotal power requirement: 1,9 KWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 2,1 mColumn drilling machine with:- Feed- variable spindle speed- Coolant pump- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 32.0 mmbore capacity in cast iron: 35.0 mmmorse taper: MK 3 spindle stroke: 160 mmthroat: 293 mmcolumn diameter: 115 mmtable:: 400 x 500 mmturning speeds: 125 - 1050 U/mintotal power requirement: 0.55 / 0.80 kWweight: 200 kgrange L-W-H: 625 x 950 x 1840 mm from a training workshop maintained condition ()Furnishing:- V-belt operated column drilling machine- adjustable drilling depth stop- manual spindle feed via cross handle- Work table with 2x T-slots- Pole-changing drive motor- Table height adjustment via hand crank- Connection cable including 16A plug Machine link:http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno =1008-9103747The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

钢钻能力（直径）：32 mm投影：295 mm钻孔行程：160 mm主轴转速 - 无级可调：110 - 2900 rpm柱径：115 mm工作台尺寸：400 x 300 mm主轴架 MK：3 铸件钻孔能力：40 mm总功率要求：1.2 kW机器重量约：330 kg空间要求约为：700 x 900 x 1850 mm机器来自培训公司，并且比所需的维护更坚固。一� �条件非常好，所有功能都经过检查。附件手动钻孔深 度停止机器文档手摇曲柄用于工作台调整主开关可锁� ��数据 fü，此广告是用ModulMWS创建的 - LogoTech oHG的机器管理�

: 34 mm: 40 mm: 40 mmthreading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Utotal power requirement: 1,4/2,2 kWMachine height: 1865 mmweight: 470 kgStandard equipment:7 TFT LCD display with touch function: manual input of spindle speedSetpoint, actual speed display, integrated drilling depth display with touchZero point transfer, virtual drilling depth scale in the display, machineStatus displays and warnings in the display, service information, selectableUser language: DE / EN / FR / ES / IT / NL / RU- Thread cutting device, for thread cutting with stop, max. 6thThread / min (thread cutting performance dependent on spindle speed), thread depthadjustable via depth stop and in the TFT - LCD display (4 tools)- Infinitely variable speed setting  ...

bore capacity in steel (diameter): 34,0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmturning speeds: 100 - 1.800 U/minengine output: 1,4 / 2,2 kWcolumn diameter: 145 mmthread: M24 ST60thread: M30 GG20feed: 0,1-0,2-0,3-0,4 mm/Uweight: 470 kgMachine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infinitely variable speed setting by  ...

bore capacity in steel (diameter): 34,0 mmthroat: 300 mmbore stroke: 160 mmmorse taper: 4 MKtable:: 615 x 430 mmturning speeds: 100 - 1.800 U/minengine output: 1,4 / 2,2 kWcolumn diameter: 145 mmthread: M24 ST60thread: M30 GG20weight: 470 kgMachine height: 1865 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infinitely variable speed setting by means of an adjusting leve ...

: 34 mm: 40 mm: 40 mmthreading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Utotal power requirement: 1,4/2,2 kWMachine height: 1865 mmweight: 605 kgStandard equipment:7 TFT LCD display with touch function: manual input of spindle speedSetpoint, actual speed display, integrated drilling depth display with touchZero point transfer, virtual drilling depth scale in the display, machineStatus displays and warnings in the display, service information, selectableUser language: DE / EN / FR / ES / IT / NL / RU- Thread cutting device, for thread cutting with stop, max. 6thThread / min (thread cutting performance dependent on spindle speed), thread depthadjustable via depth stop and in the TFT - LCD display (4 tools)- Infinitely variable speed setting  ...

: 34 mm: 40 mm: 40 mmthreading in St 60: M 24 threading in GG 20: M 30 : MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Utotal power requirement: 1,4/2,2 kWMachine height: 1865 mmweight: 470 kgStandard equipment:7 TFT LCD display with touch function: manual input of spindle speedSetpoint, actual speed display, integrated drilling depth display with touchZero point transfer, virtual drilling depth scale in the display, machineStatus displays and warnings in the display, service information, selectableUser language: DE / EN / FR / ES / IT / NL / RU- Thread cutting device, for thread cutting with stop, max. 6thThread / min (thread cutting performance dependent on spindle speed), thread depthadjustable via depth stop and in the TFT - LCD display (4 tools)- Infinitely variable speed setting  ...

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

: 34 mm: 40 mm: 40 mm: MK 4 : 100-1.800 U/min.throat: 300 mm: 615x430 mm: 2 x 14 x 224 mm: 138/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/UMachine height: 1865 mmtotal power requirement: 1,4/2,2 kWStandard equipment:- Electromagnetic feed clutch with overload protection and electricalCross Handle Switches- Main switch lockable- Motor protection switch- Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel- Speed adjustment stepless- Speed display digital- Protection class IP 54- Motor insulation class F- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads/min., (Tapping power dependent on spindle speed)Pos. 25.Coolant device B, consisting of: separate container (33 l), pump withMotor protection switch, complete fittingThe data for this ad was created with ModulM ...

3种速度的电磁进给 刀柄：MK 4 速度显示，无级调节 冷却液泵 2 种电机转�

供应 22326 规格： - 钢 ST 60 35 mm 的钻孔能力 - 钢 ST 60 40 mm 的钻孔能力 - 钻孔主轴支架 MK 4 - 钻孔主轴行程 170 mm - 投影 345 mm - 带 2 个 T 型槽的转台 550 mm - 距离表 – 钻孔主轴 650 mm - 距离底板 – 钻孔主轴 1000 mm - 进给率 0.09 - 0.16 - 0.28 毫米/转 - AZ变速器无级变速器，带手动变速器 - 钻孔主轴转速无级可调 40 - 720 rpm -右。- 左手旋转 - 驱动 400 V / 2.5 kW -照明 - 冷却液装置 - 大约需要空间 宽 750 x 高 1950 x 深 1000 mm - 约重 700 公�

规格： - ST 60 35 mm 钢制钻孔能力 - ST 60 40 mm 钢的钻孔能力 - 钻孔主轴支架 MK 4 - 主轴钻孔行程 170 mm - 投影 345 mm - 带 2 个 T 型槽的转台 550 mm -麦克斯。 距离工作台 – 钻孔主轴 650 mm -麦克斯。 距离底板 – 钻孔主轴 1000 mm - 进给 0.09 - 0.16 - 0.28 mm/rev - AZ无级变速器，带手动变速器 - 钻孔主轴转速无级可调 80 - 720 rpm - 驱动 400 V / 2.5 kW -照明 - 快速动式钻夹头 - 大约需要空间 宽 750 x 高 1950 x 深 1000 mm - 重量约 700 千�

3 速进给 刀架： MK 4 无级变速调�

高性能立柱钻孔机 供应编号：17469 品牌：阿尔兹金属 类型： AB 4 SV 机械型号：18498 建设年份： 1987 规格： - 钻孔能力 ST 60 40 mm - 钻孔能力 ST 60 50 mm - 螺纹切割装置 - 钻孔主轴架 MK 4 - 钻孔主轴行程 180 mm - 钻孔主轴速度可通过模板无级调节 - 级别 1 - 80 - 210 rpm - 等级 2 - 210 - 765 rpm - 投影 330 mm - 3 次进给 0.1 - 0.2 - 0.3 rpm - 海德。半自动进料缸。工作流 + 快速遍历 - 带 2 个 T 型槽的桌子 720 x 360 mm - 可通过齿条和小齿轮调节高度，带手摇曲柄 - 最大距离工作台 - 钻孔主轴约 780 毫米 - 加工底板的距离 - 钻孔主轴 1250 mm - 照明 - 冷却液装置 - 旋转臂控制面板 - 驱动 400 V 4 kW - 空间要求约为 宽 720 x 高 2050 x 深 1150 mm - 重量约 350� ...

钻孔能力钢/GG： 40/55 mm 主轴支架：4 MK 投影： 345 mm 工作台尺寸： 500 Ø mm 套筒行程： 170 mm 主轴转速： 80 - 710 rpm 进给：0.09/0.16/0.28 mm 驱动电机：380 V，2.2/2.5 kW 手机尺寸： 1070 x 500 x 1940 mm 重量： 620 kg

钻孔能力钢/千兆克： 40/55 mm 主轴支架： 4 MK 投影： 345 mm 工作台尺寸： 450 x 600 mm 套筒行程： 180 mm 主轴转速： 30 - 760 rpm 进给： 0.15;0,2;0.3 和 0.36 毫米 驱动电机： 380 V， 2.3/3.4 kW 空间要求： 1150 x 730 x 2000 mm 重量： 600 公�

: 40 mmbore capacity in cast iron: 46 mm: 50 mm: M 30 : M36 : MK 4 throat: 300 mm: 100-1600 U/min.: 615x430 mm: 2x14x224 mmDistance spindle/table max.: 147/688 mmcolumn diameter: 145 mmspindle stroke: 160 mmfeeds: 0,1-0,2-0,3-0,4 mm/Uheight of the machine: 1885 mmdrive motor: 1,8/2,9 kWweight of the machine ca.: 450 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

刀架 MK 40 钻孔能力高达 40 mm 钢 螺纹装置 带数字显示的无级变速调节 数字钻孔深度指示器 电磁馈电 冷却液�

规格： - 钻孔能力 ST 60 40 mm - ST 60 钢钻孔能力 55 mm - 螺纹切割装置 - 钻孔主轴架 MK 4 - 钻孔主轴行程 180 mm - 投影 350 mm - 高度可调，带 2 个 T 型槽，720 x 560 mm - 最大 测距台 – 钻孔主轴 550 mm - 最大 加工底板的距离 – 钻孔主轴 1140 mm - 色谱柱直径 200 mm - 馈电磁 0.15 0.2 - 0.3 - 0.36 mm/Rev 带过载保护 - 钻孔主轴速度可无级调节 60 - 210 + 210 - 765 rpm - 驱动 400 V / 2.3 / 3.4 kW - 照明 - 快速释放钻头卡盘 - 空间要求约为 宽 750 x 高 2050 x 深 1050 mm - 重量约 850公�

钢制钻削能力（直径）：50 mm投影：385 mm钻孔行程：240 mm工作台夹紧面：ø 500 mm主轴支架 MK：5 主轴转速：40 - 800 rpm进给：0.1/0.14/0.2/0.28/0.4 mm/U柱径：220 mm主轴/工作台距离：最大 670 mm主轴/底板距离：1180 mm总功率要求：4 kW机床重量约：1.4 t机器尺寸 长 x 宽 x 高： 1.5 x 0.75 x 2.4 m附件：快速释放钻卡盘，冷却液装置数据 fü，此广告是使用 ModulMWS 创建的 - LogoTech oHG 的机器管理�

钢/铸铁钻孔能力 50/65 mm 钢制钻孔能力 70 mm 进给量 0.1 – 0.54 毫米/转 转速 62 – 1240 rpm 录音 MK 5 主轴行程（钻孔深度） 240 mm 可用投影 385 mm 工作台 800 x 680 mm 主轴头直径 70 mm 机器高度 2350 mm

阿尔兹金属AB 5/S立柱钻孔机 通过带2个齿轮级的PIV链传动实现无级变速， 速度范围 I 级 40 rpm 至 180 rpm 速度范围 II 级 150 rpm 至 800 rpm 钢钻孔能力：50mm 进给： 0.1 / 0.14 / 0.2 / 0.28 / 0.28 / 0.4 毫米/转 套筒行程：240mm 羽毛笔直径 ： 85mm 立柱直径 ： 220mm 投影 ： 385mm 录音：MK 5 工作台面积 880mm x 670mm 带 T 型槽 （19mm） 的刚性工作台，机械夹紧，通过齿条和小齿轮可调节� ��度 尺寸 ： 2650mm x 880mm x 1700mm 更多商品 - 新的和二手的 - 可以在我们的商店中找到！ 根据要求提供国际运费�

二手柱钻机 国际艺术。编号 m3530 制造商： Alzmetall 型号 AB3/ES 投影 300 mm 重量约 400 kg 总高度约 1.80 m 速度 80 - 1,400 rpm。 录制 MK 3 钻夹头 1 - 13 mm 最大钻孔深度 120 mm 安装了新的套筒弹簧 地点： 59425 Unna 机器可以在电力下查看。 提供用于装载的叉车。 我们保留提前出售的权利。 可以在现场熟练地检查待售物品。具体问题应提前澄� ��。技术数据、尺寸、建造年份、状况等信息不具约� �力，并已尽我们所知和所信。因此，错误是保留的。 保修/保证不包括在内。货物从该地点/仓库出售，将� �险转移给那里的买家，这也适用于我们代表您进行的 装运。此优惠仅针对贸易商、贸易商和法人实体。 公司名称和商标是其各自所有者的财产，仅用于识别� ��描 ...

- 工作台尺寸： 400 x 300 mm - 套筒行程：180 mm - 钻孔能力： 35 mm - 转速范围：110 - 1450 rpm - 主轴安装：MK3 - 总功率：0.8 kW - 机器重量： 350 kg - 空间要求（宽 x 深 x 高）：1.2 米 x 0.9 米 x 2.0 米 - 条件：非常好 详 运行平稳，可立即使用 辅料 副，3 个卡盘

钢制钻削能力（直径）：65 mm投影：390 mm钻孔行程：250 mm主轴架 MK：5 工作台尺寸：880x670 mm主轴转速 - 无级可调：40-800 rpm机器重量约：1.2 twww.marcels-maschinen.ch 本广告的数据是使用ModulMWS创建的 - LogoTech oHG的机器管理�

常规： 建造年份：1993年 转速范围 75 – 5，800 rpm 快速移动 3.5 米/分钟 夹紧面 390 x 420 mm 重量 380 kg

bore capacity in steel (diameter): 30,0 mmthroat: 293 mmbore stroke: 140 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 225 - 4.300 U/minengine output: 1,0 / 1,6 kWcolumn diameter: 115 mmweight: 260 kgMachine height: 1.790 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switch, lockable- Right and left rotation by contactor c ...

Drilling capacity in St 60: 30 mmthreading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 bore stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 132/724 mmfeed: Hand spindle turning speed range: 225-4300 UpMheight of the machine: 1790 mmtotal power requirement: 1,0/1,6 kWweight of the machine ca.: 260 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 293 mmbore stroke: 120 mmbore capacity in cast iron (diameter): 38 mmthreading cutting capacity:: M20/M30 drive capacity - spindle motor: 1,9 kWspindle taper MT: 3 turning speed range: 160- 2250 U/mincolumn diameter: 115 mmtable surface area: 300 x 300 mmdistance spindle /table: 642 mmdistance spindle/base plate: 1207 mmdimensions: 0,7 x 0,45 x 1,85 mweight: 260 kgtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mUsed Pillar Drilling Machine in very good condition.- stepless spindle speed- spindle left/right- Manual tapping (manual change direction of rotation)- Manuel Depth gaugeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40,0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 160 - 2250 U/minengine output: 1,45/1,90 kWcolumn diameter: 115 mmweight: 285 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Infinitely variable speed setting by means of an adjusting lever- automatic spindle feed with feed overload protection- Spindle protection with electrical fuse- Three separate buttons for clockwise rotation - counterclockwise rotation - stop- Mushroom pushbutton (latching) for EMERGENCY STOP- Main switc ...

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117/701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160-2.250 UpMtotal power requirement: 1,45/1,9 kWheight of the machine: 1840 mmStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection switch, complete fittingThe data for thi ...

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514 x 360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117 / 701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160 - 2250 UpMtotal power requirement: 1,45 / 1,9 kWheight of the machine: 1840 mmweight of the machine ca.: 285 kgStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection  ...

Drilling capacity in St 60: 40 mmthreading in St 60: M 24 mmthreading in GG 20: M 30 bore stroke: 120 mmShort spindle: MK 3 throat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2 x 14 x 224 mmDistance spindle - machine table min./max.: 117/701 mmfeed: 0,10 + 0,20 mm/Uspindle turning speed range: 160-2.250 UpMtotal power requirement: 1,45/1,9 kWheight of the machine: 1840 mmStandard equipment:- Mushroom pushbutton (latching) for EMERGENCY STOP- Reversing switch for right-left rotation- Motor protection switch- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Connector (fully assembled, cable length 2 m)- Spindle protection with electrical protectionPos. 25Coolant device B, consisting of: separate container (33l),Pump with motor protection switch, complete fittingThe data for thi ...

钻孔能力钢/千兆吨： 18/23 mm 主轴安装： 2 MK 投影： 250 mm 工作台尺寸： 250 x 370 mm 主轴转速： 400 - 5000 rpm 驱动电机：0.48/0.6 kW 空间要求： 750 x 500 x 1670 mm 重量： 130 公�

: 23 mmthreading in St 60: M14 threading in GG 20: M16 : MK 2 : 125-2400 U/min.spindle stroke: 100 mmthroat: 250 mmcolumn diameter: 90 mm: 370x300 mm: 2x14x160 mmdistance spindle /table: min./max. 140/670 mm: Handkurbel feed: von Hand height of the machine: 1770 mmweight of the machine ca.: 180 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 : 160 - 2250 U/min.spindle stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: ca. 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm: 160 - 2250 U/min.throat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: ca. 260 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mmthreading in St 60: M24 threading in GG 20: M30 : MK 3 spindle stroke: 120 mm: 160 - 2250 U/min.throat: 293 mmcolumn diameter: 115 mm: 514 x 360 mm: 2 x 14 x 224 mmdistance spindle /table: min. 117 / max. 701 mmfeed: 0,1 + 0,2 mm/Uheight of the machine: ca. 1840 mmweight of the machine ca.: ca. 260 kgStandard equipment:- 7 TFT LCD display with touch function: Manual input of spindle speed set value Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status indicators and warnings on the display Service information Selectable operating language: DE/EN/FR/ES/IT/NL/RU- Thread cutting device, for thread cutting with stop, max. 6thread/min (thread cutting capacity depending on spindle speed), thread depthadjustable via depth stop and on the TFT LCD display (4 tools)- Infinitely variable speed adjust ...

bore capacity in steel (diameter): 40,0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 80 - 1.125 U/minengine output: 1,0 / 1,6 kWcolumn diameter: 115 mmthread: M24 ST60thread: M30 GG20feed: 0,10 + 0,20 mm/Uweight: 270 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infinitely variable speed setting by means ...

bore capacity in steel (diameter): 40,0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 80 - 1.125 U/minengine output: 1,0 / 1,6 kWcolumn diameter: 115 mmthread: M24 ST60thread: M30 GG20weight: 270 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infinitely variable speed setting by means of an adjusting lever ...

bore capacity in steel (diameter): 40,0 mmthroat: 293 mmbore stroke: 120 mmmorse taper: 3 MKtable:: 514 x 360 mmturning speeds: 160 - 2250 U/minengine output: 1,0 / 1,6 kWcolumn diameter: 115 mmthread: M24 ST60thread: M30 GG20weight: 270 kgMachine height: 1840 mm NEW ALZMETALL MODEL RANGE 7 TFT - LCD display with touch function: Spindle speed setpoint Actual speed display Integrated drilling depth display with touch zero point transfer Virtual drilling depth scale in the display Machine status displays and warnings in the display Service information Selectable user language: DE / EN / FR / ES / IT / NL / RU.Furnishing:- Thread cutting device for thread cutting with a stop max. 6 threads / min (thread cutting performance depends on the spindle speed) Thread depth adjustable via depth stop in the TFT - LCD display (3 tools).- Infinitely variable speed setting by means of an adjusting lever ...

钻孔能力钢/千兆吨： 28/32 mm 主轴支架： 3 MK 投影： 250 mm 工作台尺寸： 400 x 415 mm 套筒行程： 120 mm 主轴转速： 140 - 2000 rpm 驱动电机： 380 V， 1.1/1.3 kW 空间要求： 830 x 420/600 x 1790 mm 重量： 210 kg

- 钻孔能力 St 60， 30 mm - 短主轴 MK 3 - 主轴行程 120 mm - 投影 293 毫米 - 工作台支架 420 x 300 mm，2 个 T 型槽 - 机加工底板 320 x 329 mm，2 个 T 型槽 - 底板距离 - 钻夹头 1000 mm - 通过旋转门进料 - 重量 220 kg - 主轴转速 160 - 2250 rpm。 - 工作电压 380V-50Hz - 通过调节杆进行无级变速调节 - 发动机转速分为 2 级，700/1435 rpm - 攻丝装置，到达终点后旋转方向改变停止 - 冷却液装置完全安装。 - 机床底座中的冷却液箱 - 带LED的工作灯 - 罗姆钻夹头 1 - 16 mm - 精密机台虎钳新品（测试优胜者�

: 40 mm: M 24 : M 30 spindle turning speed - stepless: 160-2250 U/min: MK 3 spindle stroke: 120 mmthroat: 293 mmcolumn diameter: 115 mm: 515x360 mmdistance spindle /table: min./max. 117/701 mm: 2 x 14 x 224 mmfeed: 0,1 + 0,2 mm/UMachine height: 1840 mmStandard equipment:- Main switch with motor protection switch lockable- Mushroom pushbutton (latching) for EMERGENCY STOP- Speed adjustment stepless- Speed display digital- Feed overload protection- Protection IP 54- Spindle protection with electrical protectionPos. 20.1Tapping device with foot switch, for thread cutting withStop, max. 6 threads / min., (Tapping power dependent on spindle speed)Pos. 24Coolant device A, consisting of: Coolant base plate with machinedWorkpiece support surface 320x320 mm and 2 T-slots, pump withMotor protection switch, complete fittingThe data for this ad was created with ModulMWS - the software solution of Lo ...

bore capacity in steel St 60: 25 mmDrilling capacity in St 60: 30 mmthreading in St 60: M 16 : M 20 Short spindle: MK 3 spindle stroke: 140 mmthroat: 293 mmcolumn diameter: 115 mmMachine table - usable table surface: 514x360 mmT-Slots Amount - Width - Distance: 2x14x224 mmdistance spindle - column min./max.: 132/724 mmfeed: von Hand 0: stufenlos Spindle Speed: 225-4300 U/min.engine: 1,0/1,6 kWvoltage: 400 VThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.