二手 VOLLMER 出售

门锐化制造商沃尔默 倾斜和笔直的地�

Vollmer CHHF 21 H - 单面磨床 建造年份：1989年 S/N 907 制造商：德国沃尔默 工作状况良好 CHHF 21H的技术数据一览： 圆锯片 外径 80 至 700 mm 孔径 20 至 105 mm 齿距从 8 mm 起 吊钩角度可达 30 径向间隙角 -7 至 +3 切向间隙角可达 5 连接负载约 0.52 kW 重量约 85 公斤 尺寸：70 x 50 x 80 厘米 Cisei8tfrg 本机专为维修 缺乏碳化物齿。新插入的吸头用于 现有的牙齿。 通过此桌面版本，孚尔默提供了 一种特别经济、节省空间的解决方案。这 CHHF 21 H 根据湿法研磨工艺工作。 在研磨过程中，研磨单元 使用锯片手动移动到齿面上 锯片靠在固定挡块上手动定位。 下一颗牙齿，然后是所有其他牙齿 可以研磨直到所需的齿面尺寸 实现了�

编号：1251： 1 格布尔。锯片磨床 法布尔。福尔默，类型 CHHT 20 H，包吉。1984 带冷却液装�

锯片直径： 80 – 840 mm 锯片厚度： 14 mm 孔径： 10 - 220 mm 节距：8 – 120 mm 切割角度：-35+40° 间隙角：5 -45 ° 机器尺寸 WxLxH： 2295 x 1743 x 2050 mm 机器重量： 2.000 kg

品牌： VOLLMER 年： 1997 型号： QW72 P 应用程序类型：EDM 位置： 德国 机器类型：电蚀机 可用性： 01 05 2024 技术信息 控制单元 品牌： VOLLLMER 型号： PMC-SYSTEM

圆锯磨砂�

圆锯磨砂�

用于纱架锯的手柜 美国运输服务管理�

Vollmer 电动线锯磨刀�

1批次 用于开关设备的原装全刀片（Cne和Cana / e） 外径：280毫米 孔径：150毫米 齿数：20 / 42 / 48 / 54 / 56 / 64 / 72 / 78 / 100 / 110;

HM 锯片研磨机 沃尔默 CHD 250 适用于HM圆锯片的自动磨削 在胸部和背部夹紧。 所有已知的齿几何形状（扁平、交替、梯形齿等） 可以在一个过程中自动研磨。 2019年技术大修和重新粉刷 规格： 锯片直径： 80 – 840 mm 孔径： 10 - 220 mm 刀片厚度可达： 14 mm 齿距： 8 – 120 mm 切屑角度：- 35 至 + 40 自由角度：5 至 45 齿背斜磨：45 斜切齿擦伤：30 砂轮箱： 200 x 32 mm 砂轮后轮： 125 x 32 mm 尺寸 宽 x 深 x 高： 2295 x 1743 x 2050 mm 重量约为： 约 2000 kg 电源： 400 V / 50 Hz / 5.6 kVA

HM 锯片研磨机 沃尔默 CHD 250 适用于HM圆锯片的自动磨削 在胸部和背部夹紧。 所有已知的齿几何形状（扁平、交替、梯形齿等） 可以在一个过程中自动研磨。 2019年技术大修和重新粉刷 规格： 锯片直径： 80 – 840 mm 孔径： 10 - 220 mm 刀片厚度可达： 14 mm 齿距： 8 – 120 mm 切屑角度：- 35 至 + 40 自由角度：5 至 45 齿背斜磨：45 斜切齿擦伤：30 砂轮箱： 200 x 32 mm 砂轮后轮： 125 x 32 mm 尺寸 宽 x 深 x 高： 2295 x 1743 x 2050 mm 重量约为： 约 2000 kg 电源： 400 V / 50 Hz / 5.6 kVA

适用于一次夹紧胸部和背部的HM圆形起泡器的自动研� �。所有已知的齿几何形状（扁平、交替、梯形齿等） 都可以在一个过程中自动研磨。 条件：完全重建，直径扩大，重新粉刷。 直径可达1600毫米！ • 全整流罩 • 中央冷却剂连接设备 • 中央抽吸设备 • 自动中央润滑 • 砂轮支架 • 2 个磁性刀片支架 • 定心环， - 韦尔森 • 锯片厚度：最大14毫�

total power requirement:0,55 kw Overall size:800 x 900 x 1600 mm Weight:220 kg accessories::mit Absaugung 0,2 kw

制造商： Vollmer， 类型： CMS 13M， 年份： 1994， 孔径： 5 - 50， 最大圆盘直径 mm： 200， 最小-最大外径 mm： 20 - 525， 最小-最大.齿距 mm： 26 ， 年份 ：1994

冲压力：50千牛 冲程 - 无级可调：最大100集线器/分钟 工作台尺寸：550 x 500 mm 柱间距离：370 x 320 mm 行程高度：30 mm 控制：触摸 气压 - 必需：6 bar 电压：380 V 机器重量约：1.2吨 机器尺寸约：2，55 x 1，00 x 2，10（2，6）m 内置工具220 x 230 mm高度75 mm + 60 mm

This VOLLMER QW72 P Erosion machine was manufactured in the year 1997 and has 91446 operating hours. It is equipped with a VOLLMER PMC-System control unit. The machine has a spindle speed of 4000 rpm.

Suitable for automatic grinding of HM circular saw blades on the chest and back in one setting. All known Tooth geometries (flat, alternate, trapezoidal, etc.) can be machined automatically and in one run. Accesories : Handling system for saw blades type ND 230 incl. data input station and 7 loading carriages,, Total enclosure,, Coolant system,, Alphanumeric slide-in keyboard for data management,, Automatic central lubrication,, Stepless variable grinding spindle drive,, Automatic fire extinguishing system,, Automatic grinding wheel measuring and compensation device, Mist extractor N182,, Oil collecting pans,, Machine lamp,, 1 sawblade holder,, 1 grinding wheel mount., Circular saw blade diameter without robot: 80-840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Sheet thickness without robots: up to 14 mm, Sheet thickness ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one setup. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground automatically and in one pass. Accessories: Handling system for saw blades ND 230 including data input station and 3 loading trolleys Loader ND 230 Full cladding Saw positioning device, Automatic central lubrication, Wet grinding device, Extraction, Halogen lamp, 1 saw blade mounting bolt including magnet holder Oil collecting tray, Circular saw blade diameter without robot: 80 -840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Circular saw bore diameter without robot: from 10 mm, Circular saw bore diameter with robot: with robot from 10 -180 mm , Sheet thickness without robot: up to 14 mm, Sheet thickness without robots: up to ...

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

Suitable for automatic, double-sided tooth flank grinding on carbide-tipped circular saw blades. Accessories: Wet grinding device, Automatic central lubrication Hydraulic saw blade clamp, Circular saw blade outer diameter: 80 to 840 mm, Tooth pitch: up to 100 mm, optionally up to 180 mm, sheet thickness: up to 8 mm, tangential relief angle: up to 8°, Tangential clearance angle: up to 8°, radial relief angle: -10° to 6°, Radial clearance angle: -10° to 6°, grinding path: up to 16 mm, Grinding path: up to 16 mm, Grinding wheel diameter: 80 to 100mm, Grinding wheel bore diameter: 32 mm, peripheral speed: approx. 18-27 m/s, Circumferential speed: approx. 18-27 m/s, Connected load approx.: 3.6 kW (400 V / 50 Hz), Dimensions W x D x H approx.: 1980 x 1900 x 2000 mm, Weight approx: 1670 kg, colour: turquoise

Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM-tipped circular saw blades. Accesories: Total enclosure,, Hollow face grinding device,, Motorized adjustment of the rake and clearance angles,, Automatic central lubrication,, Grinding mist extractor with multi-stage filter,, Machine lamp,, 1 sawblade holder,, 1 grinding wheel mount., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 8 mm, Tooth pitch: 6 -120mm, rake angle: - 30° to +50°, clearance angle: 5° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Grinding wheel diameter: 32 mm, Connected load: 4kW (400V / 50Hz), Weight approx.: 1110 kg, Dimensions W x D x H =: 1860 x 1267 x 1970 mm, colour: Gray

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternating, trapezoidal, etc.) can be machined automatically and in one run be sanded. Accessories:, Total enclosure, Sawblade positioning device,, Automatic central lubrication,, Coolant system,, Extractor,, Halogen lamp,, 1 sawblade mounting bolt including magnetic flange., Circular saw blade diameter without robot: 100-840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: 10 - 220 mm, Sheet thickness without robots: up to 14 mm, Sheet thickness with robot: up to 5 mm, Tooth pitch: 6 - 120mm, rake angle: -30° to +40°, clearance angle: 5° - 45°, Bevel cut on the back of the tooth: up to 45 °, Bevel cut on the negative tooth face: up to 45 °, Working speed for front and back grinding: up to 12 teeth/ ...

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...

Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one, set-up. The complete machining hook angle, clearance angle, top and blade body in one single clamping Accessories:, Total enclosure,, Coolant system,, Automatic fire extinguishing device,, Alphanumeric plug-in keyboard for data management,, Machine light,, Extractor,, Measuring probe,, Saw diameter: 80-840mm, Bore diameter: from 10 mm, bore diameter: from 10 mm, sheet thickness:

Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades., Accessories:, Total enclosure including coolant system,, Motorized setting of the rake and clearance angle,, Preselection of the direction of rotation of the grinding wheel and automatic change of direction of rotation,, Grinding speed and grinding path stepless adjustable,, Operating system modified Windows version,, Storage of approx. 4,000 programs possible,, Standard software package for tooth geometries according to the program overview,, Program for grinding saw blades with group teeth, with different tooth geometries,, Program for newly fitted and broken teeth,, Software package for multi-surface machining on the positive chip and flank face,, oscillating grinding on the face and top,, Automatic grinding wheel compensation,, Automatic central lubrication,, Feed pawl 2 mm,, 1 sawb ...

Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic shutter, Automatic central lubrication, Automatic fire extinguishing device, Coolant system with pump & coolant unit., Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel path Y ...

Disc eroding machine for complete machining of rotationally symmetrical workpieces with ultra-hard cutting edges cutting materials. The workpieces are picked up flying (hanging vertically). Accesories: Mechanical vapor separator N280, Disc changer for up to 6 eroding/grinding discs, Adaptation to the A-axis on HSK 63-A-E Test mandrel HSK63A, Glass scales on the linear axes X, Y & Z, Software package additional functions for metal working tools, Ex Level Pro Software, 3 grinding wheel changing elements Automatic closure flap Automatic central lubrication Automatic fire extinguishing device Coolant system with pump & cooling unit, Workpiece outside diameter: max 320 mm, Workpiece length: Max. 250 mm, workpiece length: max. 250 mm, Tool outside diameter: Max. 200 mm, Bore diameter: Max. 60 mm, bore diameter: Max. 60 mm, Travel X1: 520 mm, Travel path X1: 520 mm, Travel Y1: 970 mm, Travel pa ...

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Automatic loading system HS # 172 (workpiece weight up to 5 kg, stack height up to 180 mm),, Automatic set-up of the machine (automatic saw infeed axis, saw stop for diameter control, audio probe Measuring device for automatic probing, etc.),, Standard software package for tooth geometries after tooth shape summary,, Software for grinding saw blades with group teeth, with different tooth geometries,, Software for replaced and broken teeth,, Data entry station for the sawblade data, with touchpanel,, Device for internal coolant supply using oil,, Coolant collecting pan including grids for the machine,, Coolant co ...