二手 STANKOIMPORT 出售

斯坦科因波特5822M螺纹磨床在苏联制造。该机器用于� �削螺纹的过程，以使其具有正确的尺寸和粗糙度。在 此过程中，使用直径为400 mm的砂轮从工件上去除少量余量，在其上形成螺纹形� �。 磨床加工最大直径为200 mm，长度为500 mm，重量不超过30 kg的螺纹。根据所选的圆盘，工件的直径可以是3至150 mm（用单线圈盘磨削）或10至120 mm（用多线圈盘磨削）。研磨机的总重量约为5吨。 斯坦科新港5822M螺纹磨床技术数据 - 最大工件直径：200 mm - 用单线圈盘磨削的工件直径：3-150 mm - 多涡旋盘磨削工件直径：10-120 mm - 最大工件长度：500 mm - 最大工件重量：30公斤 - 主轴转速：0.3 - 55 rpm - 砂轮直径：400毫米 - 功率：10.5千瓦 - 机器尺寸：270 厘米 x 230 厘米 - 供应柜尺寸：80 厘米  ...

制造商：斯坦科进口 型号： 2H135 库存号： 0984 建造年份：1981年 主轴： CM4 主轴直径： 90 mm 主轴行程： 250 mm 速度： 45 ...1400 转/分 工作台尺寸： 500 x 450 mm 工作台调整： 500 mm 尺寸（长x宽x高）：1200 x 900 x 2500毫米 机器重量： 1500 kg

电子元件镗铣床斯坦科进口斯坦科进口 2A622/1600 来自镗铣床斯坦科进口的电子元件 如何 博世3脉冲晶闸管放大器 西门子西科斯塔特 博世 PC200 ZE 与博世爱普罗姆 博世 PC200 E24V 输入 博世 PC200 AR/2A 输出 博世 PC200 NT5V 格夫夫斯 穆尔电子 NLS 100-220/24 上行 110/220 UPC 24V= Mat.Nr 031447-102401 Mat.Nr 031447-102303 特�

最大磨削长度 620 mm 磨削宽度 200 mm 最大工件高度 350 mm 主轴转速 1，380 rpm 磨削主轴垂直调节/进给 370 mm / 0.002 -0.08 mm 磁性夹板尺寸 200 mm x 600 mm 总功率需求 9 kW 机器重量约 3 t

Dividing head, spiral milling device, dividing attachment, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Take: SK40 -Tip height: 110 mm -Part head: swivel/rotatable/tiltable -Dimensions: 420/350/H240 mm -Weight: 38 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Max. Pressure: 80 bar -Liter output: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 63 bar -Liter output: 6 l/min -Hydraulic tank: 40 liters -Dimensions: 690/400/H700 mm -Weight: 100 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

Bezel, steady rest, lynette -max passage. Ø: 320mm (410mm) -Center height: 500 mm -Drawing: with the photos -Dimensions: 1000/270/H900 mm -Weight: 216 kg

Upper support, upper slide, dovetail guide -Manufacturer: comes from a Stankoimport lathe -with double holder: square -with eccentric lever: for cutting threads or other stroke 8 mm -Recess: O mm -Bolt circle: O 105 mm -Stroke: 123mm -Dimensions: 350/200/H115 mm -Weight: 10kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 500 x 200 mm -4x T-slots: 14 mm -Clamping angle: rotatable, pivotable, tiltable -Foot recording: mm -Dimensions: 500/300/H210 mm -Weight: 50.5 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1370 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Dimensions: 290/150/H190 mm -Weight: 10.3 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinder -Recording: MK5 -Tip height: mm -swiveling/rotating/cross table -Dimensions: 400/350/H260 mm -Weight: 36 kg

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Lynets, scanners, counter bearings -Weight: 25 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump -Grease lubrication pump: hand-operated, made from Stankoimport 3218 guillotine shears -Dimensions: 725/200 / H310 mm -Weight: 11 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Taper holder short taper: 6 -Weight: 66.5 kg

最大冲程： .mm 喉咙：. mm 工作台直径： . mm 序列号： 556 总功率要求： kW 机器重量 ca.： t 机器尺寸 ca.： m

板厚： 4 mm 板材宽度： 2000 mm 行程数： 65 轮毂/分钟 机器重量 ab.： 3250 kg

Rotational speed: 63-1600/min.

Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.

Max. Drilling diameter: 35 mm, Distance from spindle axis to column: 300 mm, Max. Spindle stroke: 250 mm, Max. Through-feed drill head: 170 mm. Table top dimensions: 450x500 mm, Number of spindle speeds: 12 from 31.5 - 1400 rpm, Overall machine dimensions: 1030х835х2535 mm, Weight: 1200 kg. On-site inspection is possible.

Power: 5.5kW, length: 2800mm, width: 1300mm, height: 1700mm, weight: 2.7t.

Max. rotational speed: 2000/min, voltage: 380V.

Table dimensions: 500x200mm, connected load: 1.5kW, length: 1110mm, width: 1170mm, height: 1650mm, weight: 770kg, with documentation, without accessories.

Category bench boring mill Make Stankoimport Type 2 A 635 Year of construction 1974 Spindle diameter 125 mm x-travel 1600 mm y-way 1400 mm z-travel 1600 mm Table size 1800 x 1600 mm Spindle mount MK 6 Drilling depth in one go 1000 mm Quill stroke 1000 mm Speed range - spindle 8 - 1250 rpm Speed range - facing slide 5 - 315 rpm Feeds - longitudinal / transverse / vertical 1 - 800 mm / min Table can be rotated 360 ° Table load 4000 kg Division 0.5 ° Distance table - spindle center 50 - 1350 mm Face slide feeds: 1 - 800 mm / min Cross slide diameter 800 mm Spindle drive 17 kW Machine weight approx. 32.5 t Space requirement approx. 7.50 x 3.50 x 3.93 m Accessories facing slide, stick, 2 support sleeves

Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg