二手 SOPREM 出售

带矫直机的开卷机 通道最大宽度 200 mm 板材厚度 0.5 至 2.8 mm 速度 5 至 30 米/分钟（变速器�

型号 SOP20 / 200M / ZU 不。 212772 规格： 载重量 200 kg 系统直径 900 mm 最大带宽 220 毫米 撒布范围约。 240 - 550 毫米 驱动功率 0.37 kW 大约转速 15 转/�

材料宽度： 150 mm 材料厚度： 3 mm 矫直辊数量： 7

sheet width - max.: 0250 mm coil weight: 0,200 t coil internal dia.: 240 - 560 mm coil outside dia.: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0250 mm coil weight: 0,200 t coil internal dia.: 240 - 560 mm coil outside - diam. ca.: 1000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Drive with electric motor - Rear handguard - Restriction ring in front - Control for automatic/manual, right/left and switch-on delay - Loop control via ground contact - Note the reel on the mobile frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 400 mm   sheet thickness max.: 2 mm   coil weight max.: 4500 to   feed velocity max.: 30 m/min   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 4.5 to   stroke: 500 mm DECOILER   design: single reel   sheet width max.: 400 mm   sheet width (min): 50 mm   coil weight max.: 4.5 to   max. diameter of coil: 1400 mm   mandrel expansion range from: 390 mm   mandrel expansion range up to: 525 mm LEVELLER UNIT   sheet width max.: 400 mm   sheet thickness max.: 2 mm   sheet thickness min.: 0.75 mm   number of leveller rolls: 7   diameter of leveller rolls: 60 mm   feed velocity min.: 2 m/min   feed veloci ...

CONTROLS   electronic controls OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 200 mm   sheet thickness max.: 2.8 mm   coil weight max.: 1.25 to   feed velocity max.: 30 m/min DECOILER   design: twin reel   sheet width max.: 200 mm   coil weight max.: 1.25 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 360 mm   mandrel expansion range up to: 520 mm LEVELLER UNIT   sheet width max.: 200 mm   sheet thickness max.: 2.8 mm   sheet thickness min.: 0.6 mm   number of leveller rolls: 7   diameter of leveller rolls: 60 mm   diameter of feed rolls: 60 mm   feed velocity min.: 2 m/min   feed velocity max.: 30 m/min   drive power: 1.5 kW ELECTRICAL SPECIFICATIONS  &n ...

线圈重量：0 kg 材料宽度：0 mm 线圈直径最大：0 mm 技术数据 最大装载能力：2X200 kg 电压 50 Hz 3x：230 伏 驱动电机（电机功率）：0.74 千瓦 整机尺寸： 长度：1800 mm 宽度：1000 mm 高度：1700 mm