二手 SCHAFFNER 出售

2 件 F.17.3 2 件 F.17.34 带双头（双头）的铣床，也带用于卧式铣削的台式铣� �

2 件式框架机 SCHAFFNER F.17.34， 工作台 750 / 180， 带 2 倍立式框架头 进一步： 2 件 SCHAFFNER 17.3 也可卧式铣�

规格： 刀柄：SK 40 X/Y/Z轴行程： 620 / 420 / 400 mm 速度范围： 40 - 2200 1/min 工作台尺寸： 800 x 380 mm 电机功率： 4 kW 尺寸（宽 x 深 x 高），约：1780 x 1600 x 2130 mm

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Schaffner, power supply line filter from CNC milling machine Mikron UME 600 -Type: FS4787-30-33 -Voltage: 3x440 VAC/50 - 60Hz -Dimensions: 250/190/H65 mm -Weight: 3.3 kg

type: FN3100 - 80 - 35 mm manufacturer: SCHAFFNER : Manufacturer: Schaffner EMC Inc FN Type: 3100 - 80 - 35 520VAC / 50 - 60 Hz 80A@50°c / 25/100/21 EN 133200 IEC 60939 Made in Switzerland Three-phase (delta) EMC/EMI line filter 80 A AC DC to 60 Hz Single-stage Terminal block The Schaffner FN3100-80-35 is normally used in electrical circuits and systems to and systems to suppress electromagnetic interference caused by switching power supplies generated by switching power supplies, motor controllers and other electronic devices. devices. Such filters help to comply with EMC directives and reduce the emissions to ensure that other devices in the environment are not affected by electromagnetic are not affected by electromagnetic interference. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

大电流EMC滤波器 夏弗纳FS 20364-1200-99 型 3 相，3 x 交流镇流器，电源连接模块，电源滤波器 输入电压： 3 x 400 VAC 输入频率： 50 / 60 Hz. 额定电流： 3 x 1200 A 尺寸（宽 x 高 x 深）：135 x 260 x 235 毫米 重量： 27.5 千克 状况非常好，从库存分辨率来看，未使用 2 件可用，每件价格; 二�

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 425 mm Table width: 125 mm Longitudinal travel (X-axis): 200 mm Transversal travel (y axis): 100 mm Vertical travel (z axis): 200 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 4000 rpm Taper in spindle: 30 ISO Voltage 50 Hz 3x: 400 Volt Motor power: 1.1 kW Overall dimensions machine: Length: 750 mm Width: 750 mm Height: 1400 mm Various accessories: Rigide table Set of collets Set of short cutter arbors Tool cabinet Lamp

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 180 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 110 mm Vertical travel (z axis): 280 mm Spindle speeds: from: 80 rpm up to: 2800 rpm Taper in spindle: 30 ISO Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1600 mm Various accessories: Steady Universal milling head Set of long cutter arbors Set of short cutter arbors Tool cabinet