规格: 床身翻转直径: 520 mm 通过支架实现的车削直径: 310 mm 车削长度: 1000 mm 凹槽内循环直径: 580 mm 尖端高度: 250 mm 床宽: 410 mm 主轴孔径: 62 mm 主轴法兰:凸轮锁尺寸 8 主轴转速: 24: 9 - 1800 rpm 机器重量约为: 2,75 t 所需空间约为: 2.8 x 1.3 x 1.3 m 电气 380 伏: 32A 三爪卡盘:315 mm 叉车 冷却液装置 测量系统:所有3个轴上的玻璃棒0.005mm分辨率 快速释放钢支架英寸多适用英寸: C
Description: Lead and pull spindle lathe - Rapid traverse - Forkardt 3-jaw chuck 315mm - Multifix steel holder - Copy facility - 1 pc bezel - Coolant system - Machine light - chip tray - Feed protection - Operating manual Turning diameter over bed 560 mm Turning diameter over support 310 mm Turning length 1700 mm Turning diameter in the offset 610 x 250 mm Speed 9 - 1800 rpm Center height 280 mm Spindle bore 72 mm Total power requirement 15 kW Machine weight approx. 5.5 t Space requirement approx. 4.0 x 1.6 x 1.75 m Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 1,750 mm, weight approx.: 5,500 kg
turning diameter over bed: 560 mm turning diameter over slide rest: 310 mm turning length: 1700 mm turning diameter in the gap: 610 x 250 mm turning speeds: 9 - 1800 U/min centre height: 280 mm spindle bore: 72 mm total power requirement: 15 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,0 x 1,6 x 1,75 m Lead and pull spindle lathe - Rapid traverse - Forkardt 3-jaw chuck 315mm - Multifix steel holder - Copy facility - 1 pc bezel - Coolant system - Machine light - chip tray - Feed protection - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 520 mm turning diameter over slide rest: 310 mm turning length: 2500 mm total power requirement: . kW weight of the machine ca.: 4 t dimensions of the machine ca.: . m The technical Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse Over 8500 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
编号: 10258 制造商: 胜乐 控制类型: 康文蒂奥内尔 存储地点: 哈尔 伯施塔特 原产国: 德国 衬里: 福卡特 F315品牌 机器长度: 3.800 mm 机器宽度: 1.300 mm 机器高度: 1.500 mm 机器重量 Ca.: 4 t 刀柄类型: 多重固定 C 型车削长度: 1.800 mm 床身车削直径: 520 mm 滑块支架车削直径: 320 毫米 主轴孔: 62 毫米 挡板直径(内): 270 毫米 钳口卡盘上的孔: 84 x 120 mm
中心高度: 0 毫米 中心距离: 400 毫米 主轴孔径: 0 毫米 使舍尔 112 型号 UDA 1120 x 4 70年 传统车床中心高度(mm)回转 = 1.120 中心距(毫米)DBC = 4.000 主轴孔 4 卡盘 1.000 圆锥形转弯附件