二手 PRVOMAJSKA 出售

表壳 500 X 800 国际标准化组织 ISO 40 数控1600

工作台夹紧面： 254 x 1100 mm 工作台移动 x：自动。u. v. 手 682 mm 工作台机芯 y： 手动 380 mm 工作台机芯 z： 手动 457 毫米 铣头可旋转：+/- 90 或 +/- 45 主轴安装： ISO 40 主轴转速： 70 - 2300 rpm 皮诺尔进给量： 0.038 - 0.152 毫米/分钟 主轴驱动： 380 V， 2.2 kW 空间要求：1600 x 1600 x 2150 mm 重量： 1420 kg

Description: PRVOMAJSKA Center Lathe weight approx.: 2,200 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,000 x 1,400 mm

Description: Machine number: 25/62/621 Spindle speeds: 60 - 1820 rpm Table dimensions: 600 x 210 mm With 4 grooves Travel distances: X: approx. 400 mm Y: approx. 300 mm Z: approx. 300 mm The machine is equipped with a two-axis digital readout from the manufacturer HEIDENHAIN Feed rate: 10 - 196 mm/min Incl. various machine accessories such as collets, holders and more weight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,000 x 1,700 mm

Description: Center height 200 mm , Turning diameter in the crank 600 mm , Bed width 360 mm , Number of longitudinal strokes 12 , Number of transverse strokes 12 , Number of work spindle speeds 12 Fabrication number 0095/73 , The machine is equipped with a 3-jaw chuck, a Multifix basic holder, as well as a tailstock and existing documentation Drehlänge: 1,500 mm, turning diameter over bed: 400 mm, turning diameter over slide: 210 mm, turning speed range: 36 - 1600 rpm, total power requirement: 4,2 kW, weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,100 x 1,600 mm

Description: Machine number 01587525 , Including 3-axis digital readout, manufacturer ELESTA, type VISULESTA II E z-motion: 400 mm, x-motion: 600 mm, y-motion: 400 mm, table surface area l x w : 1100x300 mm, tool taper: SK 40, turning speed range: 63 - 2500 rpm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,700 x 2,200 mm

Description: serial number: P 2141.0012-06 control: SIEMENS Sinumerik ,802  , turning diameter over slide: 315 mm number of controlled axes: 2 travels: X-axis: 150 mm Z-axis: 1000 mm toolchanger positions: 8 turning speed range: 25 - 4000 rpm turning diameter: 315 mm total power requirement: 15 kW  , attention: upgrade to SIEMENS ,Sinumerik ,802, revolver head is broken! turning diameter: 315 mm, serial number: P 2141.0012-06, turning diameter over slide: 315 mm, x-motion: 150 mm, z-motion: 1,000 mm, control: SIEMENS Sinumerik 802, toolchanger positions: 8, number of controlled axes: 2, turning speed range: 25 - 4000 rpm, total power requirement: 15 kW, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,800 x 1,700 mm

x 行程： 700 mm y 行程： 450 mm z 行程： 450 mm 控制： Heidenhain 类型： TNC 355 工作台面： 800x500 mm 通用头： 手轮： 主轴架 ISO： 40 总功率要求： kW 机器重量 约： 2.7 t 空间要求 约： m 技术数据是制造商或操作员的规格，因此对我们 无约束力。我们保留进行事先销售的权利，我们的业� �� 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过8500平方米的存储区域，起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司， 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。

Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time.

Band saw Prvomajska HAP280 Maximum cutting diameter: 280 mm The possibility of working in a machine Total power: approximately 4 kW Tape dimensions: 3660x25x0.9mm Weight: approx. 1500 kg Dimensions (length / width / height): 2000 mm / 2000 mm / 2000 mm