电火花线切割机 ONA ARION K500 (2001) 生产中 X 轴(纵向) 700 mm Y 轴(横向) 500 mm Z轴(垂直) 400 mm 最大工件长度 1500 mm 最大工件宽度 1500 mm 最大工件重量 5000 kg 最大工件高度 400 mm 长x宽x高:4150×3320×3150毫米。 重量:8200kg 发电机重量:400公斤
头部和工作台之间的最大距离:525 mm 纵向行程: 300 毫米 (X) 横向行程: 150 毫米 (Z) 容器尺寸:600 x 400 x 225 mm C轴 赫希曼夹紧系统 工作台尺寸:400 x 275 mm 最大工作台重量 450 kg 磁盘筛选
品牌:欧纳 年份: 2016 型号: QX8 B1 L 应用类型:电火花加工 位置: 葡萄牙 机器类型:侵蚀机 可用性:立即 GINDUMAC ID: PT-EDM-ONA-2016-00001 技术信息 一般数据 测量宽度: 2800 MM 测量深度: 1500 MM 测量高度: 1000 MM 运动 X 轴运动:2000 MM Y 轴运动:750 MM Z轴运动:650毫米 桌子 外长: 2200 MM 外宽: 1000 MM 工作台承重:20000 KG 附加信息 机器优势 技术机器优势: - 工作台/床头板最大距离 1200 MM - 最大电极重量 300 KG
Length: 3100mm, width: 2350mm, height: 2474mm, weight: 4.8t, with documentation and filter system, without accessories, operating hours unknown, an on-site inspection is possible, the machine has not been used for several years, there is no one on site who can operate the machine.
This ONA QX8 B1 L erosion machine was made in the year 2016 in Spain. The machine has a weight allowed on the table of 20000 kg.
Sinking machine ONA BN-180 Electrode holder stroke 150mm Table stroke H 525mm x long 300 x width 150 Tray 600 x 400 x 225 Permissible table mass 450kg S2000 / 30A generator Filter + instructions and manuals + 4 drums of 200 l of dielectric.
Tank dimensions: 1000x600x375 mm Working table: 650x400 mm Permissible weight on the table: 1100 kgs Travels (X,Y,Z): 500x300x200 mm Electrode weight: 250 kgs Generator: S2000-60 Power: 9 Kw Equipped with: POLY-SPARK
X axis: 900 mm Y axis: 400 mm U axis: 80 mm V axis: 80 mm Z-axis: 400 mm Max workpiece size: 1300x800x400 mm Max workpiece weight: 1000 Kgs Max table speed: 900 mm/min Max conical cutting angle: ±30º/45 mm Wire Ø: 0.1-0.3 mm Type of wire spool: DIN 125 - DIN 160 (6 kg max) Min hole Ø: 2 mm Year: 2000 Equipped with: Control: ONA
X axis: 550 mm Y axis: 300 mm Z axis: 400 mm U-axis: 140 mm V-axis: 140 mm Max workpiece size: 1050x800x400 mm Max workpiece weight: 3000 Kgs Max table speed: 2000 mm/min Max conical cutting angle: ±30º/95 mm Wire diameter: 0.1-0.35 mm Type of wire spool: DIN 100-125-160-200-DIN 355 (45 kg max) Min hole Ø: 1.5 mm Max. power: 14 KVA Year: 2005 Equipped with: Control: ONA
Wire EDM machine 1 Faulty electronic board The machine is located in France.
CNC Wire EDM CNC type X axis: 350mm Y axis: 250mm Z axis: 200MM Max. workpiece length: 910mm Max. workpiece width: 680mm Max. workpiece height: 200mm