规格: 切割宽度 500 mm 工作台尺寸 800 x 820 mm 行程约。 350 毫米 导轨下的切割高度约为 400 毫米 皮带长度 4000 mm 大约无级变速 齿轮箱级 1 15 – 80 m/min 齿轮箱 Stage 2 75 - 305 m/min 齿轮箱 Stage 3 207 - 944 m/min
使用 立式带锯 , 品牌穆斯纳 , 良好 , 电连接 型号 SSF/500 产品编号 11502 建造年份 1963 规格: 切割速度: - 3级齿轮+可变齿轮箱15 – 940米/分钟 - 高速2350米/分钟 支撑台 宽 x 深 约 700 x 600 毫米 卸载约 480 毫米 切割高度最大约为 360 毫米 空间要求,宽 x 深 x 高约 1.1 x 0.8 米 重量估计约为 1 至 设备: 两个辊子的橡胶涂层状况良好 理想的皮带焊机 工作台可倾
规格: 切割宽度 1050 mm 工作台尺寸 800 x 820 mm 自动行程约。 340 毫米 导轨下的切割高度 400 mm 手轮下方的切割高度约为 290 毫米 输送带长度 5250 - 5380 mm 无级变速 - 齿轮箱级 1 17 - 79 m/min - 齿轮箱级 2 67 - 305 m/min - 齿轮箱等级 3 207 - 940 m/min
使用 立式带锯 , 品牌穆斯纳 , 良好 , 电连接 型号 SM 420 产品编号 20313 建造年份 1972 规格: 8 种切割速度:12 – 375 米/分钟 支撑台 宽 x 深 约 600 x 600 毫米 卸载约 410 毫米 切割高度最大约为 260 毫米 空间要求,宽 x 深 x 高约 1 x 0.8 x 1.95 米(高度包括 9 厘米眼螺钉) 重量估计约为 0.6 至 设备: 两个辊子都是新橡胶化”/新占用的 理想的皮带焊机 工作台可倾
切割速度: - 3级齿轮+可变齿轮箱15 – 940米/分钟 - 高速2350米/分钟 支撑台 宽 x 深 约 700 x 600 毫米 卸载约 480 毫米 切割高度最大约为 360 毫米 空间要求,宽 x 深 x 高约 1.1 x 0.8 米 重量估计约为 1 至 设备: - 两个辊子的橡胶涂层状况良好 - 理想的皮带焊接机 - 桌子可倾
Description: Roller dia: 320mm Table size: 500x500 mm Motor Power: 1,3kW Projection width/height: 310/230mm Weight approx: 500kg throat: 310 mm, roller diameter: 320 mm, workpiece height max.: 230 mm, weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/320 -Drive: 0.9/1.3 kW -Cutting width: max.205 mm -Cutting height: max.310 mm -Saw band: length 2530 to 2650 mm -Saw band speed: adjustable in 8 stages -Work table: swiveling in 2 axes: -Dimensions: 830/785/H1630 mm -Weight: 449 kg
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner, vertical band saw Rekord type SSF/420 with saw band welder -Drive: 2.2 kW/380 V -Cutting width: max. 410 mm -Cutting height: max. 250 mm -Band saw: length 3150 to 3260 mm -Saw band speed: 15 - 1800 m/min -Work table: swiveling -Band saw welder: Ideal BSS 016 -Dimensions: 1050/800/H1950 mm -Weight: 576kg
Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg
卷筒直径: 400 mm 喉部: 390 mm 工件高度: 240 mm 锯带长度: 2980 mm 工作台表面积: 500x600 mm 机器重量 尺寸: 350 kg 机器尺寸: 650x1100x1700 mm
roll diameter: 400 mm throat: 420 mm workpiece height: ca. 220 mm table-size: 600 x 600 mm cutting speed: 12 - 375 m/min saw band length: 3160 - 3260 mm saw band width min./max.: 3 - 12 mm total power requirement: 3,6 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 0,6 x 1,0 m Optical condition: very good: Mechanic: very good: Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: New castors Emergency stop Both doors electrically locked Swivel table Circuit diagram has been redrawn Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: Machine overhauled in 2023 New castors Emergency stop both doors electrically ...
卷筒直径:500 mm 投影:485 mm 工件高度:mm 总功率要求:2 kW 机器重量约:1 t 空间要求约:m 滚筒 Æ 500 mm 安装高度 最大 300 mm 投影 485 mm 工作台尺寸 600 x 700 mm 工作台旋转 +/- 15 驱动功率 约 2 kW 380 V 50 Hz 重量约 1,000 kg 附件/特殊设备 · 带锯片带锯片长度、高度可调的带锯片 导轨、stfl的焊接装置。速度控制 此广告的数据是使用模数MWS创建的 - 标识科技oHG的机器管理。
卷直径:420 mm 投影:410 mm 工件高度:295 mm 切割速度:12 - 375 m/min 工作台夹紧面:600 x 600 mm 锯带长度:3150-3260 // 3-16 mm 工作高度:1020 mm 电压:380 V 总功率要求:1.1 / 1.7 kW 机器重量约:620 kg 空间要求约:1000 x 800 x 1900 mm 从维护车间开始 - 状况良好(!!) 设备: - 对焊机IDEAL BSO / 16带剪刀和磨石 - 4个齿轮级+ 2个电机速度 - 皮带导轨用手轮 调节高度 - 工作台可倾斜 +/-45 -工作台可倾斜 10 -机器底座 数据fü,此广告是用ModulMWS创建的 - LogoTech oHG的机器管理。
Diameter of the roll: approx. 420mm, projection in width: approx. 415mm, projection in height: approx. 265mm, table size: approx. 600x600mm, saw-band speed: 18-562m/min, 8 steps, saw band length min./max.: 3150/3260mm, table swivel in two axes.
立式带锯 莫斯纳型 Rekord SM 420 Masch. No. 25615 建造年份 1983 卷筒直径 420 mm 宽度 410 mm 投影宽度 410 mm 高度投影 295 mm 工作台尺寸 600 x 600 mm 皮带速度 12-375 米/分钟 8 步 锯片长度最小/最大 3150 / 3260 毫米 驱动功率 1.1 / 1.7 kW 电源连接 380 伏,50 赫 兹 - 对焊机 理想的 BSO / 16 带剪刀和磨刀石 - 4 档级 + 2 种发动机转速 - 皮带引导 带手轮 高度调节- 工作台可倾斜 +/-45 - 工作台可倾斜 10- 用于开关 的脚踏开关 空间要求 长 x 宽 x 高 1000 x 800 x 1970 mm 重量约 600公斤 状况非常好;二
导轨下高度: 420 mm 喉部: 420 mm 工作台长度: 0 mm 工作台宽度: 0 mm 规格 带锯 / 环锯 / 自动 垂直带锯 切割能力 90 ° 420 mm 切割速度 米/分钟 18 - 2280 米/分钟