深孔钻床 莫拉特型号 LD2-500 制造商:莫拉特 型号: LD2-500 YOM: 2005 序号。 A281 - 1295 数控控制:GE-发那科动力伴侣 2 锭子 最小-最大钻孔直径:2-20 mm 最大钻孔深度:500 mm 钻头进给范围:0-3000毫米/分钟 引擎功率 : 5.5 kW 额外:反向旋转工件,排屑器,高压泵,冷却液过滤2 0微米,1200L棕褐色,100bar 进给:10米/分钟 最大工件长度:500 mm 主轴转速: 10600 rpm 重量: 3500 kg 快速移动:6.000毫米/分钟
多轴枪钻机 制造商:莫拉特 类型:全速打印 YOM: 2000 序列号: A438-0700 数控:GE-发那科 18 M 2 锭子 最小-最大钻孔直径:3-12 mm 最大钻孔深度:500 mm X 轴横向行程: 500 mm Y轴垂直行程:250毫米 Z 轴行程:800 mm 主轴中心距: 250 mm X轴快速移动速度:10米/分钟 Y轴快速移动速度:4米/分钟 Z轴快速移动速度:10米/分钟 工作台尺寸: 600x600 mm 主轴中心距工作台高度:最小 117 最大 377 桌上最大重量:680公斤 交流主轴电机功率: 3.7 KW 主轴转速范围:0-10,500 rpm 钻头进给范围(无级可变):0 mm-4.000 rpm 进给电机扭矩(连续): 5.9 Nm 机器重量:4500公斤 冷却液系统重量(干):1000 kg 冷却液箱容量:1200升 冷却液输送:0-90升/分钟 最大冷却液压力:100 bar 电源:380V ...
Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilling technique., Deep hole drilling can employ various machine set-ups: rotating workpiece, rotating tool, or both tool and workpiece rotating. The most common, however, is for the workpiece to rotate, ...
Mollart Sprint 500 深孔钻床 Fanuc Power Mate 控制 最大 L = 500mm 直径 20 mm 主轴: 2 主轴旋转: 10000 RPM 100 RPM 反向主轴旋转 最大压力 100 BAR 机器可在我们位于 Gussago BS. Mimu 机床的仓库中进行动力检