二手 MEUSER 出售

MEUSER M II S 间隙床身发动机螺丝切削车床 导轨摆动 600 mm 横向滑轨旋径 400 mm 间隙摆动 860 mm 车削长度 1500 mm 主轴转速 1200 rpm 稳定休息 卡盘 - 3 个 线程公制和英制 重量约 2500 kg

三爪卡盘直径240mm

Description: Attention: Drive motor broken off - transport damage (see pictures)! Turning diameter: Over bed: 410 mm Over support: 240 mm Turning length: 1000 mm Center height: 205 mm Center distance: 1000 mm Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpm weight approx.: 1,300 kg, Approx. Onsite Dimension. (l x w x h): 2,320 x 1,150 x 1,220 mm

Description: Turning diameter over bed: approx. 500 mm Turning diameter over support: approx. 350 mm Center width: approx. 1500 mm Through bore: approx. 55 mm Speed range: approx. 28 - 1250 rpm Serial nr.: 25689 weight approx.: 2,500 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,000 x 1,400 mm

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe M4L -Max. Passage: Ø 500 mm -Center height: 390 mm -technical drawing: with the photos -Dimensions: 840/140/H850 mm -Weight: 98 kg

Moving bezel, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, steady rest from lathe M4L -Max. Passage: Ø 180 mm -Center height: 315 mm -technical drawing: with the photos -Dimensions: 520/535/H560 mm -Weight: 32 kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel lathe type M4L -Max. Passage: Ø 325 mm -Top height: 360 mm -technical drawing: in the photos -Dimensions: 640/100/H725 mm -Weight: 70.5kg

Bezel traveling, moving bezel, bezel, steady rest, lynette -Manufacturer: Meuser, bezel from lathe type MV SKV/2-1 -Bezel: driving -Max. Passage: Ø 170 mm -Center height: 230 mm -technical drawing: with the photos -Dimensions: 520/405/H510 mm -Weight: 33kg

Bezel, steady rest, lynette -Manufacturer: Homemade fits Meuser, bezel from lathe type MV SKV/2-1 -Bezel: max. passage Ø 370 mm -Center height: 460 mm -technical drawing: with the photos -Total dimensions: 910/255/H985 mm -Weight: 152 kg

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Manufacturer: Meuser, master and feed spindle lathe type M3A -Turning length: 1400 mm -Swivel Ø over bed: 550 mm -Rotating Ø without bed: 800 mm -Rotating Ø over support: 300 mm -Spindle bore: Ø 58 mm -Spindle speeds: 15 - 810 rpm -Three-jaw chuck: Röhm Ø 250 mm -Faceplate: 500 mm -Accessories: incl. tool holder/tools see photos -Tailstock mount: MK5 -Dimensions: 2770/1070/H1310 mm -Weight: kg

Bezel, steady rest, lynette -Manufacturer: Meuser, bezel with coolant connection from lathe type MV SKV/2-1 -Max. Passage: Ø 350 mm -Center height: 460 mm -technical drawing: with the photos -Dimensions: 820/270/H895 mm -Weight: 160kg

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 25 - 2000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,5 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,50 x 1,08 x 2,50 m Accessories: box table 1100 x 700 x 550 mm, coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 410 mm turning diameter over slide rest: 240 mm turning length: 1000 mm centre height: 205 mm centre distance: 1000 mm spindle bore: 47 mm spindle turning speed range: 28 - 1250 U/min feeds - longitudinal: 0,03 - 8,8 mm/U feeds - cross: 0,006 - 1,84 mm/U thread - mm pitch: 0,25 - 76 mm thread - inch: 1/2 - 152 Gg/ thread - module: 0,25 - 22 mm bed width: 320 mm tailstock quill diameter: 55 mm tailstock taper MT: 4 total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimensions of machine L x W x H: 2,32 x 1,15 x 1,22 m Accessories: 3-jaw chuck RÖHM 160 mmø, MULTIFIX-head with 2 inserts, solid steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

中心高度：620 mm 空心：最大 400 mm 机器重量：约 200 kg

bore capacity in steel (diameter): 35.0 mm bore capacity in cast iron: 40.0 mm arm length: max. 1230 mm turning speeds: 50 - 2250 U/min spindle taper MT: 4 MK base plate: 2030 x 200 mm quill stroke: 220 mm quill feed: 0.04 - 0.40 mm/U total power requirement: 3.62 kW weight of the machine ca.: 1500 kg range L-W-H: 2100 x 1000 x 2570 mm Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to stable construction - Pole-changing drive motor - automatic spindle feed (0.04/0.07/0.11/0.17/0.28/0.40 mm/rev) - 1x MEUSER clamping cube with T-slots .. 615 x 500 x 510 mm - machined base plate - orig ...

面板直径： 1400 mm 滑架上的回转直径： 1400 mm 中心距： 1500 mm 车削长度： mm 总功率要求： kW 机器重量 ca.： t 机器尺寸 ca.： m

3 爪卡盘 4 爪卡盘直径 1100 mm 1 稳定 中心间距： 7000 mm 床的摆动： 1480 mm 横向滑轨上的回转： 1150 mm 回转间隙： 1800 mm 主轴孔径直径： 102 mm 主轴功率： 22 kW 转速： 8 > 400 rpm

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation.

Center width: 1500mm, max. chuck diameter: 200/240mm, motor power: 4kW, including steady rest, on-site inspection is possible.