二手 LISSMAC 出售

编号 ： 7225 型号： SBM - XS 300 G1E1 制片人： LISSMAC 创建时间：2015 参数： 小时： 166 最大板材宽度： 15 mm 重量： 1400 kg

LISSMAC MBS 510 系列 砖带锯 重量 173kg 最大切割高度 510 mm 最大切割长度 700 mm 锯片长度 3750 mm 锯台尺寸 920/710 mm 负载能力锯台最大 50kg 外形尺寸： 1080/750/1840 mm 加气混凝土和砌体 G&LISS-803031

Posimat PB 80 是一种气动操作的搬运装置。版本：带配重，悬挂在� ��场钢结构上。 规格： 负载能力：120公斤;枢纽;1，600 mm;工作范围（半径） 2，600 mm;不含配重和立柱的自重： 150 kg 该设备只使用了几个月�

最大处理重量 400 kg，达到 9，000 mm，行驶速度 3 m/sec.，功率 45 kW，重量 1，600 kg，驱动全液压，用于墙体预制，其他设备组件可用� �如果您有兴趣，请联系我们。

working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...

working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...

Nominal power: 65kW, connected load: 76kVA, weight: 4.2t, including extraction and measuring devices.

max. working width: 1500 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2730 mm Width: 1500 mm Height: 1532 mm Machine weight: 2200 kg

max. working width: 1000 mm workable material thickness: 0,5 - 120 mm Working hours machine: h Total power: 98 A Total current consumption: 45 kW Insulation class: IP 42 Infinitely variable feed speed: 0-4 m / min Adjustment of material thickness: elektrisch Adjustment of tools: elektrisch Length: 3100 mm Width: 2100 mm Height: 2000 mm Machine weight: 3790 kg

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

max. working width: 1000 mm workable material thickness: 20 mm Tension: 400 V / 50 Hz Total power: 28,5 A Total current consumption: 12,6 kW Insulation class: IP54 Infinitely variable feed speed: 0-4 m / min Length: 2230 mm Width: 1500 mm Height: 1532 mm Machine weight: 1700 kg

This LISSMAC SBM XL 1000 S2B2 Deburring machine was manufactured in the year 2013 in Germany. It is a machine for steel, stainless steel and non-ferrous metals works. It has a touch screen control and an anti slip carpet. It also has 2 type B metal brushes to descale and 2 S-type tools flexible abrasive blocks for rounding contours.

This LISSMAC SBM-XS 300 Deburring Machine was manufactured in 2017 in Germany. It has only 570 working hours, like new. This machine works with a max. plate dimensions of 200 x 200 x 15 mm (grinding of both sides) and includes a set of completely new grinding brushes.

The machine is in good technical condition. Maximum workpiece width: 300 mm Maximum workpiece width and length (double-sided processing): 200 mm Minimum part size: 25 x 25 x 1mm Min. and max. thickness workpiece: 1-15mm Feed speed: 0-2m/min Workpiece thickness setting: electric Tool setting: manual Total machine power: 5kW Total current consumption: 8A Weight: 1400kg Dimensions: 1300 x 2300 x 1900mm 517 engine hours have been worked on the machine. The machine comes with a new set of grinding wheels worth 1700 Euros - they have not been installed yet. By prior arrangement, the possibility of a tour in progress.

Equipped with 2 grinding units Including wet extractor (suitable for aluminum, among others)