数控卧式铣床 G 型宇宙 20 制造商: 拉贡 型号: G 宇宙 20 新品:2004 条件:非常好,完整 控制:法格8055 工作台尺寸: 2000 x 700 mm 台到塔的距离: 1217 mm T 型槽: 5x18x116 毫米 最大工件重量: 4000 kg X 轴行程: 2000 mm Y 轴行程: 800 mm Z 轴行程: 1000 mm 主轴锥度: ISO 50 主轴转速: 15 000 rpm 快速移动速率:24毫米/分钟 主电机功率: 17 - 20.5 kW 所需总功率:27 kW 机器重量:10 600 kg 尺寸:5495x3440x3016 mm
拉贡NG-L 1800数控通用铣床 拉贡机床 S.L.- 西班牙 控制海登海恩跨国公司 360 X 轴 2300 毫米 Y 轴 650 毫米 Z 轴 600 毫米 表 1900 x 550mm 表负载 2,5t 主轴速度无步 50 - 3000 rpm 主轴锥形 SK 40 主轴电机 9.5kW 总功率 15 kW 饲料 - 无步骤 - 0 - 5000毫米/分钟 快速穿越 10 米/分钟 工具更换器 20 工具 重量 ca. 6,5 t. 配件: 3 倍副, 约 10 工具持有人, 触摸探头, 其他
出售:FU TV 125型Lagun万能铣床 该机器状况良好,工作台表面为1,250 x 280 mm,并配有T型槽(3 x 16 mm)。X、Y 和 Z 轴的运动为 850 x 290 x 475 mm 主轴支架为 ISO 40。最大变速为 1,800 rpm。主轴头可以从一侧旋转到另一侧,并从前向后倾 !纵向和横向进给运动分别为 2,500 毫米/分钟和 750 毫米/分钟。最大主机功率为5.5马力。工作台上的最大 工件重量为 300 公斤。机器本身的总重量为 2,000 公斤。现货供应,需提前销售
拉贡 GVM-4 SP 包括法格数字显示屏 包括液压虎钳 包括三爪卡盘 包括 10 个刀柄,包括夹头 包括 3 个钻夹头 机器完美运行 机器可以用叉车装载
万能铣床拉贡从培训车间在最佳状态 ! 头部可普遍旋转、旋转和倾斜。 类型: FTV2 YOC 2006 刀柄 SK40 钻孔销 冷却液装置 行程 X 轴 x00 mm 行程 Y 轴 x60 mm 行程 Z 轴 x40 mm 铣头类型 立式铣头 速度范围 40 - 2000 毫米/转 工作台夹紧表面 约 x00 x x00 mm T 型槽尺寸 xx mm 进给 X 轴 xxx 毫米 进给 Y 轴 xxx 毫米 进给 Z 轴 xxx 毫米 重量约 1,850 kg 可根据要求提供更多数据,根据照片休息 特价
拉贡FTV4-SP刀塔铣床。 工作台: 1372x280mm. 纵向行程:800mm。 交叉行程:345mm。 垂直行程:400mm。 滑枕行程:570mm。 变速头。 ISO40. 主轴行程:127mm。 自动刀柄。 开槽头。 DRO法格为3轴。 重量:1450公斤。
x 行程: 2500 mm y 行程: 1000 mm z 行程: 1000 mm 控制: 海登海恩 工作台面积: 2600x800 mm 速度: 2100 rpm 主轴架 ISO: 50 总功率要求: kW 机器重量 约: t 空间要求 约: m 技术数据是制造商或操作员的规格,因此对我们 无约束力。我们保留进行事先销售的权利,我们的业 和销售条款和条件仅适用 。 关于我们 超过400台自有机器在仓库 超过12000平方米的存储区域,起重机容量70吨 以上超过1000件配件为您的车间 如果您想出售机器生产线或您的公司, 请与我们联系。 该广告的数据是使用模态MWS创建的 - 标识科技oHG的机器管理。
x-travel: 1050 mm y-travel: 330 mm z-travel: 475 mm tool taper: ISO 40 spindle turning speed range: 35 - 1800 U/min spindle motor: 5,5 kW milling head -swivable +/-: +/- 45 ° table-size: 1525 x 325 mm table load: 400 kg distance spindle /table: 142 - 617 mm feed - longitudinal/cross: 0-1300 / 0-390 mm/min rapid traverse longitudinal and cross: 2050 / 615 mm/min total power requirement: 9,3 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,4 x 2 x 2,3 m equipped with: - Universal milling head HURON 360° - Swivel control panel with Heidenhain digital display - right/left running of the milling spindle - Rapid traverse and hardened guideways in all 3 axes (X/Y/Z) - stable rotation/clamping table - automatic Central lubrication - Foldable milling/spindle protection Msachine comes from a training workshop and has been thoroughly tested The data for this ad was created w ...
x-travel: 1050 mm y-travel: 330 mm z-travel: 475 mm speeds: 35 - 1800 U/min table surface area: 1525 x 325 mm number of feeds: 12 feed - longitudinal/cross: 20 - 920 mm/min feeds vertical: 6 - 276 mm/min tool taper: ISO 40 total power requirement: 5,5 kW weight of the machine ca.: 2700 kg dimensions of the machine ca.: 2,5 x 2,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3000 mm y-travel: 940 mm z-travel: 1000 mm table surface area: 3250 x 800 mm spindle taper: SK 50 spindle turning speed range: 40 - 1800 U/min feeds longditudinal/cross/vertical: 0 - 2250 mm/min rapid traverse: 6 m/min table load: 4500 kg control: HEIDENHAIN, TNC 355 total power requirement: kW weight of the machine ca.: 10,3 t dimensions of machine L x W x H: 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X 行程: / mm Y 行程: / mm Z 轴行程: 约 500 mm 工作台尺寸: 1400 x 300 mm 刀具锥度: SK40 车削速度: 35 - 1800 U/min 可旋转铣头 约: 360 总功率要求: 12 kW 机器重量约: 2,8 t
最小/最大主轴到工作台: 75 / 507 mm 工作台中心至立柱距离: 213 - 619 mm 主轴中心距柱距离: 405 mm X 轴: 585 mm Y 轴: 406 mm Z 轴: 432 + 111,5 mm 工作台尺寸:762 x 381 mm 工作台最大重量:350公斤 主轴入院 (ISO): BT40 主轴功率:5.5/7.5千瓦 控制: 海登海恩 工具转换器: 是 刀柄数量:18位 转数: 60 > 6000 rpm 托盘数量: 6x 主电机功率 : 10,5 kW 长度: 2150 mm 深度: 2600 mm 高度: 2450 mm 重量:3.4
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, number of T-slots/width/spacing: 5/18/120mm, table dimensions: 1800x700mm, max. workpiece weight: 2.5t, connected load: 16.5kW, weight: 10.1t, with documentation and tool cones, without tools.
This LAGUN GVC 600 Milling Machine fabricated in Portugal in 2001. This machine incorporates 3 axis.
Disassembled; including chisels; without screen; High and low RPM
Vertical turret milling machine Manufacturer: LAGUN Model: FTV 5-SP Year of manufacture: 2008 Few working hours, machine in condition like new
Table: 1800x700 mm T-slots: 5x18x120 mm Maximum weight on table: 3500 Kgs Longitudinal traverse (X-axis): 1700 mm Cross traverse (Y-axis): 800 mm Vertical travel Z: 800 mm Milling head model: Manual Spindle taper: 50 OF 69871/A Speed range: 40-3000 r.p.m. Power: 22 kw Feedrate: 0-5000 mm/min Rapid traverses: 10.000 mm/min Approx machine weight: 10100 kgs Machine dimensions: 4550x3290x3060 mm Year: 2000 Equipped with: Control: FAGOR 8055
Bed Milling Machine - Universal Make Lagun Type FBF 3250 Year of construction 1989 x-travel 3000 mm y-travel 940 mm z-travel 1000 mm Table clamping area 3250 x 800 mm Spindle mount SK 50 Spindle speeds 40 - 1800 rpm Feeds - longitudinal/transverse/vertical 0 - 2250 mm/min Rapid traverse 6 m/min Table load 4500 kg Control HEIDENHAIN, TNC 355 Machine weight approx. 10.3 t Machine dimensions L x W x H 4.50 x 2.69 x 2.71 m Accessories Vertical head swiveling in 2 levels with hydr. Tool clamp, coolant device
Lagun Milling Machine, 5CNC. Heidenhein Control 355. In function, ready to collect. With the dicumentation of the machine and the control.
Second hand universal milling machine Used universal milling machine Brand: LAGUN Model: FU5-LA Weight: 6000kg Rigid fixed head with ISO50 cone. It has protection for CE regulations. Table dimensions: 2000x400mm Ram offset: 800mm Y offset: 270mm X offset: 1500mm Z offset: 500mm
Used fixed bed milling machine Brand: LAGUN Model: FBF 1200 Year: 1991 Weight: 5.500kg Control: HEIDENHAIN TNC 355 (New screen) Measures table: 1200x550mm Offsets axes: X - 1100mm Y - 600mm Z - 600mm Ferret head with hydraulic lashing tool. Cone: ISO 50 Spindle speeds: 50 - 3000 rpm (2 speed ranges) Advances in the X and Z axes: 1 - 3000 mm / min Fast forward X and Z axes: 10,000 mm / min Motor power: 15KW
Machine available visible in working order Table Size: X:2500mm Y:700mm Z:700mm X Axis Runs: 2500 Y Axis Strokes: 700 Z Axis Strokes: 700 Maximum Spindle Rotation Speed: 3,000 rpm Head Indexing: 2.5º Spindle power kW: 22 Government Unit: Selca 3045 Spindle connection: DIN 69871
Table length: 9500 mm Table width: 1100 mm Longitudinal X: 8000 mm Cross Y: 1200 mm Vertical Z: 1500 mm Positions ATC: 0 CNC Brand: Siemens MACH-id 6049 MAKE LAGUN Spain TYPE GBM CM8 YOP 2010 SPECIFICATIONS X-Axis 8000 mm Y-Axis 1200 mm Z-Axis 1500 mm Table load 25000 Kg Power on spindle 34,5 kW Spindle speeds 4000 Rpm Millinghead auto-index 2,5 x 2,5 ° Feed rate X-Axis 20.000 mm/min. Feed rate Y-Axis ...
Table length: 2600 mm Table width: 1000 mm Longitudinal X: 1000 mm Cross Y: 2500 mm Vertical Z: 1000 mm Positions ATC: 1 CNC Brand: Heidenhain Bed type milling machineLagun Goratu - FBF 2600 Head has been replaced Central luibrication Doors in front off machine Coollant system HeidenHain TNC 426 HeidenHain HR-410 Handwheel X-Axis: 2500mm Y-Axis: 1000mm Z-Axis: 1000mm Table Length: 2600mm Table Width: 800mm Table load: 6200 Power on spindle:22kW Spindle speeds: 2100Rpm Spindle Taper: Bt-50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Length: 5000mm Width: 3600mm Height: ...
工作台长度:4000毫米 工作台宽度:1200毫米 纵向 X:4000毫米 十字:1200毫米 垂直 Z:1500毫米 位置 ATC:20 数控 品牌:海德汉 数控型号:海登海恩TNC 426 X-Axis4000 毫米 Y轴1200 毫米 Z轴1500 毫米 工作台负载7000 主轴功率34,5 kW 主轴转速3000 转 铣头自动分度2,5 x 2,5 尺寸 (估计值) 长度10000 mm 宽度4500 mm 高度3770 毫米 重量21600 kg