二手 HARRISON 出售

车削长度： 1200 mm 旋转直径：床面 380 mm 主轴通道： 50 mm 主轴转速：35 - 1,500 rpm。 配备： - 具有不同钳口的 3 爪卡盘 - 钢罐 原产地：英国 机器长x宽x高：2500 x 950 x 1200 mm 机器重量： 1200 kg

哈里森处于最佳状态。 SH 200 毫米 SW 1500 毫米 尾座 MK5 可拆卸桥 紧急输出 ， Bremese ， 饲料保护 冷却液系统 面板 2 车床卡盘 研磨装置 带有高品质配件的橱柜�

万能铣床 转速 90 - 2000 rpm x 650 毫米 Y 300 毫米 Z 400 毫米 进给速率 x 电动 冷却液泵 辅料 重量 1 �

中心高度： 200 mm 中心宽度： 1250 mm 床身旋转直径： 400 mm 主轴孔径： 55 mm 主轴支架： 凸轮锁 D1 6 mm 尾座被子拾取锥：5 MK 主轴转速： 1-297/1-861/1-2700 rpm 电气。连接： 400 V， 7.5 kW 空间要求： 2900 x 1800 x 1500 mm 重量： 2200 kg

Description: Center lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual Turning diameter over bed 330 mm Turning diameter over support 210 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 40 - 2500 rpm Center height 165 mm Spindle bore 38 mm Total power requirement 2.2 kW Machine weight approx. 0.7 t Space requirement approx. 2.1 x 0.9 x 1.3 m Approx. Onsite Dimension. (l x w x h): 2,100 x 900 x 1,300 mm, weight approx.: 700 kg

turning diameter over bed: 330 mm turning diameter over slide rest: 210 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 40 - 2500 U/min centre height: 165 mm spindle bore: 38 mm total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 2,1 x0,9 x 1,3 m Lead and pull spindle lathe - Rapid traverse - 3-jaw chuck 160mm - Collet chuck - 4-way quick-change steel holder - 2 pcs bezels - Coolant system - Feed protection - chip trays - Chip protection wall - Emergency stop facility - Foot brake - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 554 mm : 2000 mm : : 277 mm : 104 mm : 400 mm : 2000 U/min : D1-11 DIN 55029 : 95 mm : 145 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0400 mm : 1250 mm : : 200 mm : 55 mm : 315 mm : 2700 U/min : D1-6 DIN 55029 : 73 mm : 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 1.200 mm Height of centres: 400 mm swing over bed: 800 mm diameter over cross-slide max.: 510 mm control: FANUC 21i-TB spindle bore: 250 mm Lathe - cycle-controlled | HARRISON - ALPHA 2800XS The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: a 2800XS | ALPHA2800XS | ALPHA-2800XS | ALPHA 2800 | ALPHA2800 | ALPHA- 2800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 554 mm turning length: 1000 mm control: Fanuc total power requirement: 11 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 2,6 x 1,6 x 1,8 m HARRISON alpha 550 cycle lathe, used Controller: Fanuc Turning diameter: 554 mm Turning length: 1,000 mm Spindle passage: 90 mm Spindle: Speed (max.): 1,800 rpm Speed levels: 9 Power: 11kW Spindle passage (approx.): 90 mm Workpiece clamping: 3-jaw chuck, ø315 mm Tool carrier: Technology: quick-change holder on cross slide Travel in X: 310 mm Tailstock: Technology: Manual tailstock Quill ø: 95 mm Stroke: 145mm Taper: MK 6 Equipment/accessories: Chip management: chip tray Coolant management: KSS pump Shaft Machining: Fixed Bezel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2015 : 1686 : ca. 2 Wochen ab Auftragse : 22800 € : 1 : 330 mm : 1000 mm : 167 mm : 38 mm : 210 mm : 12 : 40 - 2500 1/min : 16 : 0.03 - 1 mm/U : 0.2 - 14 mm : 2 - 56 TPI Gänge/ : 190 mm : 92 mm : 42 mm : 3 MK : 110 mm : 2,2 kW : 1900 mm : 1000 mm : 1550 mm : 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Harrison M500 Ø 530 x 2000 mm Distance between centers: 2000 mm Swing over bed: 530 mm Swing over cross-slide: 370 mm Swing in gap: 730 mm (200 mm long) Diametre of main spindle bore: 80 mm Power on main spindle: 9,7 kW Number of speeds: 31 > 1600 rpm Length: 3450 mm Width : 1170 mm Height: 1830 mm Weight: 2277 kg

This Harrison M390 Lathe was manufactured in the year 2004 in United Kingdom. It has 2 axis. The machine has a spindle speed of 2000 rpm.

Description Machine in excellent condition, still installed by the user Specifications Harrison Producer Model 1460 Year 2003 Condition Used CNC FANUC Maximum workable length 1 (capacity) 1500 bar passage 78 spindle connection ASA 8 spindle speed 2200 spindle power 11 kw spindle 300 mm manual turret 4 positions turning on the wagon 270

中心高度： 0 毫米 中心距离： 800 毫米 主轴孔径： 50 毫米 使 哈里森 19 类型 190 70年 LUZ环球德雷马希内德拉班克 摆幅中心高度（mm） = 380 中心距（毫米） DBC = 800 主轴孔径 = 50 转速 1500 rpm 卡盘/刀具系统