二手 GABLER 出售

电动薄膜分度 最大薄膜宽度 805 mm 双加热：顶部加热器 81.90 kW 下加热器 54.60 kWGabler M92XL 热成型机，2009 年，带杯模，用于 95mm PP 杯， 板材流挂控制 最大外形面积 765 x 436 mm Indramat 伺服电机插头辅助 最大拉伸深度 150 mm（可选 200 mm） 锁模压力 380 kN 电机额定功率 81.90 kW 气压 6 - 10 bar 最大干循环速度 52/ minGabler M92XL 热成型机，2009 年，带杯模，用于 95mm PP 杯， 带倾斜运动的底部平台 在线计数器/堆垛机单元 以 90 度的速度将产品运送到输送机。到机器方向 适用于PS、PP、PVC、ABS、PLA、PET等。 西门子 S7 PLC 控制器 Siemens SIMATIC MULTI PANEL 触摸板显示器 包括 95mm PP 杯、22 腔和相关堆叠部件的 PP 杯模�

盖布勒D600热成型机，2000年年龄：- 放卷架 不景光伺服电机分度。 顶部和底部加热器，总容量 73.9 kW 英德拉马特伺服电机成型站 成型面积： 600 x 320 mm 拉深小于/位置： 40/15 毫米 堆垛和计数站 计数/堆叠产品自动传输到传送带 废料卷绕机 主机 PLC 控制器： 西门子思迈 S5 P3 3A 加热器 PLC 控制器：西门子西门子 S5 95U 操作员触摸板控制面板 （OPC） ： 西门子 SIMATIC OP27 机器已于2014年进行了翻新，在翻新期间增加了一套新 的凸轮。 优良的生产条�

手机号码： 3284 设备/更多信息： • 机器周围的保护墙。 模具面积（Vx高）： 450x220 拉伸深度： 150 mm （最小值）材料厚度： 0.65 毫米 （最大）材料厚度： 2 毫�

Forming surface: 750x436mm, heating output: 155kW, max. compressed air supply: 10bar, weight: 9.2t, operational hours counter: 43,589h.

SWING thermoforming machine with preheating station 2heat (using a complete 8-socket mold with a stacking device for manufacturing PP-stack.) Complete thermoforming machine SWING, made in GABLER Thermoform GmbH & Co., 2014 Designed for the manufacture of plastic cups of PP, PS, PET, HIPS and other thermoforming polymers using cutting punch (molding and cutting down together). Manufacturer: GABLER Thermoform GmbH & Co., Germany. Date of acceptance to accounting: 04/30/2014. Main technical characteristics: Area of forming surface, mm Maximum - 450x220 Minimum - 430x180 Maximum width of the tape, mm 480 Maximum tape thickness, mm 2 Maximum depth of molding, mm 125 Maximum noise level, dB Not more than 80 Tact at idle, tact / min 44 Mechanical performance, cycles / min 21-25 Voltage 230 / 400V, 50Hz Total power consumption, kW 64.15 Operating air pressure, bar 8 Dimensions (l ...

The thermoforming machine is designed for producing deep-drawn formed parts using heated plastic film. The machine features a controlled unwinder to feed the plastic film from a roll and a toothed conveyor belt for automatic transportation through the machine. The film is heated from above and below in the heating station, then vacuumed and compressed air is used to pull it into a mold for deep-drawing. After cooling, the outer contours are trimmed, and the individual blanks are held in place by retaining collars. In the stacking station, the product blanks are pressed out of the film and stacked on a conveyor belt, which transports them out of the machine once a set amount is reached. The entire process is automated based on programmed specifications, except for the manual removal of finished workpieces at the outlet. The trimming and stacking stations can be adjusted for different prod ...

Material : PP, PET, HIPS // Forming Area (Vxh): 800x550