二手 COMEC 出售

科美克珍珠磨 M 8 不锈钢 双层夹克 集装箱容量 8 l 非常好的即用型条件，直接从生产开始!

高明科技传送带 品牌：康美 A.A 长度 = 10，000 毫米 皮带宽度： 500 毫米 驱动：带齿轮箱的电动机 A.A 长度 = 5700 毫米 皮带宽度： 650 毫米 驱动：带齿轮箱的电动机

二手残缺水平榫卯彗噗噗�MMS/15-2000-CA - 自动装载机 - 最大工作长度 mm2000 - 7号主轴 - 伏特 380/50 - 信噪比970406 - CE规则（1997年�

用于角座的二手铣床 COMEC MOD。FAS2 - 信噪比951106 -伏特。380/50

二手纵向砂光彗星模组。朗 LS - CE 规则 -伏特。380/50 - 信噪比970408 - 1997�

二手磨机由纽约喜剧公司制造，型号MM-12。2014 年新品。重量 650 公斤， 12 升， 30 千瓦， 6 巴， CE， 出口 dIIB T4.控制面板�

1987， 帽： 75，000 吨/年， 带材宽度： 250 - 1300 MM， 厚度： 0.2 - 2.0 MM， 卷材重量： 10 T， 片材长度： 最大 4.0 公尺， 2ND 线： 帽： 30，000 吨/年， 带宽： 700-1300 毫米， 厚度： 0.3-3.0 毫米;卷材重量： 10 T， 片材长度： 4.0 米， 速度： 20 米/分钟�

二手镗端切割机彗星模组。菲莫夫 2500 2UT+2UF+CA2 - N. 2 倾斜切割单元 - N. 2个立式镗床 - 最大工作长度 250 cm - 带自动装载机 - 周径安全网 - 信噪比021132 - 公元（2002年�

二手夹具与折叠长凳 COMEC MOD。声压级/3R - CE 标准 - 最大工作台倾斜度 30° - 最大工作尺寸 1350x780 mm - 3个液压缸 - 液压单元 5.5 马力 - CE规则 - 1995年 -伏特。380/50 - 软件950304

二手双面切割锯 COMEC MOD.TD1200 - CE 规则 - N.2 电机 2 马力 - 2 个刀片直径 350 mm - 最小/最大工作长度 220/1200 mm - 切割倾斜度：水平+/- 35°;垂直 +/- 35° -伏特。380/50 - SN 961227 - 年份 1996

二手双面切割锯 COMEC MOD.TD1200 - CE 规则 - N.2 电机 2 马力 - 2 个刀片直径 350 mm - 最小/最大工作长度 220/1200 mm - 切割倾斜度：水平+/- 35°;垂直 +/- 35° -伏特。380/50 - 年份 1995

二手轨道砂光机 COMEC MOD。LC/15 AV系列 - 带喂料装置 -伏特。380/50

二手轨道砂光机 COMEC LC/20/AV - CE 规则 - 最小/最大直径 10/160mm - 带进料装置 -伏特。400/80 - SN 010118 - 年份 2001

二手水平垂直榫眼机 COMEC 模组。MOV12X系列 - 4+4 水平主轴 - 3+3 立式主轴 - 最小/最大主轴中心距 85/1000 mm。 - N.2 装载机（右和左） - 水平主轴最大倾角 ±20° - 垂直主轴最大倾角 +30°/-10° - 锁定工作台的倾斜度 0/-20° - 主轴最小同轴 85 mm - 主轴最大同轴 1000 mm - 最大榫眼长度 100 mm - 最大榫眼深度 50 mm -伏特。380/50 - SN 962135 - CE规则（1996年�

用于 Comec 椅子组件的交叉砂光机 5.5kw主电机 砂带宽度 100mm 抽气喷嘴 110mm 机器尺寸 233x60x140cm

轨道砂光机 Comec LC/15AV 元件直径最小/最大 10-100mm 4kw主电机 2×0.25kw进给电机 砂带尺寸 1220x70mm CE认�

轨道砂光机 Comec LC/15AV 元件直径最小/最大 10-100mm 4kw主电机 2×0.25kw进给电机 砂带尺寸 1220x70mm CE认�

我卖了一把双斜切锯，没有连续 COMEC TD2400 + CA 的评分。 工作宽度250至2400mm。 最大锯齿尺寸 80 x 100mm 每个头的角度设置： 径向 +50° / - 50° 轴向 +45°/ - 45° 锯片直径fi.350/30mm 电机功率 1.85KW + 1.85KW 元素杂志。 弹射回操作员 条件和新的一样好。全面运行，随时可用。可以检查� �� 即将推出。具有 CE 和完整的文档�

规格： 工作范围 mm： 最小 220 - 最大 1200 锯片直径 mm： 350 孔径： 30 2 台电机，每台 1.5 KW 垂直和水平锯片倾斜度 35° 带配件抽�

1997年制造的有切割装置COMEC FM0V8 2000的钻头。 最大工作宽度 2000mm 配置： 0 电机从下面 1+1 电机从侧面/角度可调 2个电机从后面/头部角度可调 3个电机从上方/头部角度可调 从上方打印4件材料 2把从上方切割的锯子/头部角度可调 非典型 5 轴钻头包括 3 x 15mm / 2 x 25mm。 Dubel在价格上领先。 非常好的补充。可用相同�

Line consists out of: 1 - Decoiler 15 ton - max length: 1200 mm 2 - Slitting unit - interchangeable cassette system - max length: 1100 mm - max thickness: 3 mm 3 - Scrap winder 4 - Recoiler + unloading arm

CNC frame processing machine Brand: COMEC DRIVER New machine - With this machine you can process assembled door frames in quantity-1, door by door. - 5-axis machining spindle with ingenious crosshead technology for fastest tool use and productivity. Automatische Positionierung der Auflagensupporte. - High-precision and program-controlled clamping system with O-reference on the surface. - Laser measurement of the surface contours for precisely fitting milled fittings. - Automatic discharge of the finished frame parts. - Possibility of connection to known door software systems. - The machine can be individually designed to meet your required machining needs. Give us your requirements and let us offer you your MD JAMB suitable. - This offer is valid for Germany. Wehrmann is the exclusive sales and service partner for COMEC in Germany.

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

CNC Drawer fronts processing machine Brand: Comec Type: FRONTAL CN 1500 2S New machine for point to point drilling and milling, with automatic loader and pieces return to the operator Structure Frame of electro-welded steel sheet of heavy-duty construction Loading system 1 fix left shoulder and 1 mobile right shoulder on which are fixed the loader, magazine and locking system. Manual adjustment of the mobile shoulder on ball bearings slides with measure indication by digital display. Automatic loader with vertical adjustable magazine. Pieces advancement system step by step with 2 working stations, complete with locking cylinders on each station. Pieces return system Pieces return system composed with: 1 transversal motorized belt kW 0.37. 2 ejector cylinders. 1 longitudinal, lateral motorized belt kW 0.37. 1st Working station: vertical-horizontal Point to Poi ...

Drilling- cutting machine Brand: Comec Type: FIMOV new machine IDEAL MACHINE FOR NARROW PART MACHINING IN THE FURNITURE SECTOR Machine can be combined with drilling units from several sides, Sawing unit for cutting the workpiece to length, optionally inclinable With magazine and automatic workpiece transport to the operator

Drilling- cutting machine Brand: Comec Type: Frontal 2 CN New machine Drawer parts machining in compact design Fast set-up for the smallest possible batch sizes thanks to CNC technology - Perfect machining The FRONTAL CN is ideally equipped for the machining of drawer parts and can be optionally equipped with drilling units from above, but also laterally, e.g. for drawer side parts. The drilling units at the top are suspended at the front of the upper beam so that a grooving saw unit can be mounted at the rear, for example, for drawing in top grooves. The machines can be equipped either with manual feeding or with automatic feeding magazine, so that the machines can work in continuous operation. For larger batch sizes, the FRONTAL is also available as a BASIC machine with conventional control.

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

New CNC Maschine Brand: Comec type: MD JAMB CNC machining center for complete machining of a wide range of door frames. 3 machining supports for cutting to length on miters, milling for corner connectors and door lock panels. A complete door frame element with decorative cladding and rebate cladding is machined in one set-up. A complete frame can thus be machined in approx. 2.5 - 3 min. Machining equipment can be individually adapted to the customers requirements.

General SKU022Y162 LocationBarneveld MakeComec Sassuolo TypeMicronet Tipo M8 No.7107 Year of construction1995 Material Housing materialStainless steel Disc materialStainless steel Main Features MaterialStainless steel Volume8 Ltr. Specified Features - Sand mill Vertical sandmillDiscontinuous micro ball mill (1x) Capacity8 Ltr Housing dimensions dia. 170x335mm With sievecheck With jacketcheck Motorcheck MaterialStainless steel Information With switchcheck Floorspace0,6x0,6 M Total height1,1 M Weight160 KG Extra Specifications- Mixing chamber equipped with 2 dissolver discs (dia. 115mm) on 1 shaft Sand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

General SKU060U432 LocationBarneveld MakeComec TypeMicronet 25 No.6757 Year of construction1994 Material Housing materialStainless steel Main Features MaterialStainless steel Volume25 Ltr. Motor4 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmillDiscontinuous microball mill (1x) Capacity25 Ltr, Useful 8-22 Ltr With sievecheck With mechanical sealcheck With jacketcheck Motor4,0 KW, 220/380 Volt With variable speed drivecheck Information With switchgearcheck Floorspace1,2x0,5 M Total height1,5 M Weight230 KGSand millsComecMills > Sand millsBrand > Comec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes.

The machine of the Italian company COMEC model CS 1500 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed

The machine of the Italian company COMEC model CS 2000 two trolleys for the production of bottles, canisters 0.1 to 2L Forms can be purchased The machine is currently working Possibility of installing a double head Energy-saving inverter installed

Grinding diameter maximum: 330 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm SPECIFICATIONS Cylindical / Surface / Other   Swing head grinder Grinding diameter Ø   330 mm X - Travel   680 mm Y - Travel   300 mm Grinding wheel size   330 mm kW power on spindle  1,75 kW Spindle speeds / ranges  1400 Rpm DIMENSIONS Length   1100 mm Width  1400 mm Height  1700 mm