二手 CHARMILLES 出售

编号 ： 7280 型号： FORM 2-LC ZNC 导演： 夏米尔 生成：- 参数： 工作台尺寸： 500x400 mm X 轴最大行程长度：300 mm Y 轴的最大行程长度：200 mm Z 轴最大行程长度：200 mm 容器尺寸： 820x500 mm

编号 ： 5896 型号：机器人54P 制片人：夏米尔 创建时间：2002年 参数： 工作台尺寸： 750x500 mm 最大工作电流：64 A X 轴最大行程长度： 600 mm Y 轴最大行程长度：400 mm Z轴最大行程长度：450 mm 容器尺寸： 1200x775x385 mm 机器重量： 3000 kg 设备： 换刀装置 C�

编号 ： 5897 型号：机器人54P 制片人：夏米尔 创建时间：2000年 参数： 工作台尺寸： 750x500 mm 最大工作电流：64 A X 轴最大行程长度： 600 mm Y 轴最大行程长度：400 mm Z轴最大行程长度：450 mm 容器尺寸： 1200x775x385 mm 机器重量： 3000 kg 新来�

类型：电火花成形机 标识号：22409 分类： 电火花成形机床 / 电火花加工 制造商： Charmilles 型号： ROBOFORM 350 GammaTec 建设年份：2006 行程：350 x 250 x 300 mm [ X x Y x Z ] 工作台尺寸 X： 500 mm 工作台尺寸 Y： 400 mm 最大工件重量： 500 kg 电极更换器：16 倍 C�

类型：电火花成形机 标识号：22607 分类： 电火花成形机床 / 电火花加工 制造商： Charmilles 型号： ROBOFORM 35P 建设年份：2002 行程：350 x 250 x 300 mm [ X x Y x Z ] 工作台尺寸 X： 500 mm 工作台尺寸 Y： 400 mm 最大工件尺寸 X： 780 mm 最大工件尺寸 Y： 400 mm Z 轴最大工件尺寸： 300 mm 最大工件重量： 500 kg 最大电极重量：50 kg 换刀装置：16速 C轴 发电机：64安培 可降低的容器 Erowa ITS50 夹紧头

控制 FJ.37X X/Y/Z轴行程 450/320/162 mm 行程 U/V +/- 50 mm 工件尺寸 X/Y/Z 1100/760/360 mm 工作台承重 500 kg 重量 3200 kg 导线管 ø0.25 和 ø0.30 用于 EROWA 张力梁的基板 导线对准块 线螺纹模�

常规： 建造年份：1998年 行程： X 350 毫米， Y 250 毫米， Z： 300 毫米 台面尺寸 500 x 400 mm 工件尺寸最大 500 kg 重量约 2，350 kg 其他设备和随附的配件： 换刀装置 刀架系统 3R

品牌：查米尔 年份： 1998 型号： 机器人 810 应用类型：电火花加工 位置： 葡萄牙 机器类型：侵蚀机 可用性：立即 控制单元品牌：查米尔 GINDUMAC ID： PT-EDM-CHA-1998-00001 技术信息 一般数据 测量宽度： 3950 MM 测量深度： 3550 MM 测量高度： 2960 MM 机器重量： 5300 KG 控制单元 品牌：查米尔 主驱动器 轴数：4 运动 X 轴运动：800 MM Y 轴运动：600 MM Z轴运动：500毫米 附加信息 机器优势 技术机器优势： - 最大.PART尺寸：1500 X 1000 X 500 MM - 最大重量部分：4200 KG - 介电量： 1600 L - C 轴：是 - 工具槽：24 - 卡盘：3 R 定性机器优势： - 机器状况良好 -翻�

Cross table controlled, cross slide table, clamping table, clamping plate with T-slots, clamping angle -Transfer: in the current condition as seen -Y axis: measuring rail is defective -Cross table: comes from an erosion machine -Table surface: 450 x 340 mm -Travel: X 280 mm/Y 170 mm -Dimensions: 1000/1130/H950 mm -Weight: 728 kg

Connected load: 5kVA, weight: 2.5t, the machine is defective, the cable of the C-axis motor is defective, an on-site inspection is possible.

Max. workpiece weight: 800kg, weight: 3.34t, with generator, the PC of the machine is defective, an on-site inspection is possible.

Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000.

This CHARMILLES ROBOFORM 55P Erosion machine was manufactured in the year 2003 in the United States. It has 3 axis and work table size of 495 x 749 mm.

This Charmilles Roboform 31 Erosion machine was manufactured in the year 1996 in Switzerland.

This CHARMILLES ROBOFORM 51 Erosion machine was made in 1998. The machine has a table size of 750x500 mm.

This CHARMILLES ROBOFORM 50 Erosion machine was manufactured in the year 1999. The machine has a table size of 500x400 mm. 2 units are available.

This CHARMILLES Robofil 2020 SI Erosion Machine was made in 1996 in Switzerland. It has been working for approximately 73000 hours. It operates in solid conditions without any problems and can be inspected under production. In the delivery scope all standard accessories are available (except clamping devices). For more information see PDF attached.

This Charmilles HD30CNC Erosion machine was manufactured in the year 2006.

-First commissioning in 1985; Attention! There is a defect on the changer, C-axis shows temporary errors; -Technical information without guarantee; -X-axis: 320mm; -Y-axis: 220mm; -Z-axis: 320mm; -C-axis: 360°; -Working surface: 560x400mm; -Workpiece weight: 500kg; -Usable area: 880x550mm; -Control: Charmilles; -Weight approx. 4500 kg; -Dimensions (LxWxH) approx. 3000 x 1610 x 2460 mm; -We offer this machine as a spare parts donor.

Die Sinking Machine CHARMILES ROBOFORM 54P - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 600 mm, Cross travel y axis: 400 mm, Vertical travel z axis: 450 mm, C axis travel: 360 °, Working table size: 750x500 mm, Work tank dimension: 1200x800x460 mm, Automatic electrode change nr.: 16, Power supply: Charmilles, Max working current: 64 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem

CHARMILLES ROBOFORM 550 - 2005 电火花成型机�

CHARMILLES FORM 20 手册 - 1990 电火花成型�

Machine is in good condition X : 350 mm Y : 250 mm Z : 350 mm

Die sinking EDM machine Make Charmilles type Roboform 51 built in 1999 X600 Y400 Z450 table 750 x 500 mm Max workpiece weight 1000 kg very well-kept condition machine plugged in, can be checked

Charmilles Robofil 310 CNC type Year: 1994 X axis Axis shift of 400 mm Axis Y axis shift 250 mm Z-axis travel 400 mm The stroke of the U axis is 400 mm The stroke of the V-axis 250 mm We attach 8 cartons of brass wire 0.25 and all the instructions including one in Polish

Charmilles Robofil 4020 Year 1996 Travel: X-450, Y-320, Z-270, U-100, V-100 Max cutting angle: 30 degrees Max workpiece weight: 500 kg Programmable axes: X, Y, Z, U, V Max dimensions of the detal - 990 x 505 x 270

Fanuc CNC model Automatic threading yes Immersion EDM type Maximum wire inclination +/- 30° 400mm X Axis Travel 400 mm Y Axis travel 300 mm Z Axis travel 400 mm U Axis travel 500 mm V Axis travel 400 mm Maximum piece dimensions 900 x 600 x 400 mm Max piece weight 1000 kg

table dimensions 450x350 mm X, Y, Z axis travel 270x170x200 mm weight 300 kg

Charmilles 31 EDM Wire Cutting Machine Machine is in good working condition

Charmilles D10 EDM sinking machine it is equipped with an Isocut E20 head, an Isopulse 80 generator with Microfin and an X and Y Iskra visualization. the machine works and is in very good general condition but has a problem with the hydraulic descent regulator, the machine has difficulty descending (this is a known problem on these machines) but it is surely repairable. the machine is supplied complete ready to use, with numerous tool holders + electrodes of all types and with the original documentation.

Charmilles Robifil 640 CC EDM Wire Cutting Machine X : 800 mm Y : 550 mm Z : 510 mm

The machine has been standing still for a couple of years now, so it needs a complete overhaul, it is not possible to see it in operation. - tank dimensions: 1105 x 765 x 435 [mm] - maxi dimensions of the pieces: 1100 x 760 x 360 [mm] - maxi piece weight: 800 [kg] - strokes: X x Y x Z: 450 x 320 x 162 [mm] - U strokes: +/- 50 [mm] - V strokes: +/- 50 [mm] - solution: 1 [µm] - wire unwinding speed: 2 - 15 [m / min] - rake angle: +/- 30 ° - tank dimensions: 1150 x 900 x 2280 [mm] - tank capacity: 1000 [l] - dimensions: 3700 x 2700 x 2300 - weight: 4930 [kg]

Charmilles Robofil 440 SL EDM Wire Cutting Machine X : 550 mm Y : 350 mm Z : 400 mm

CHARMILLES Type P25 die-sinking EDM Die-sinking EDM. never used. The car turns on

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 800 mm Table width: 560 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 450 mm Cross traverse (Y-axis): 320 mm Max. distance from the table and sleeve: 640 mm Working vessel:length inside: 1195 mm Width: 800 mm Height: 410 mm Working head: way rapid feed (Z): 410 mm Dielectric aggregate: Contents: 560 l Height: 870 mm Width: 2110 mm depth: 750 mm net weight: 300 kp Generator: Power: 128 A Height: 2100 mm Width: 650 mm depth: 600 mm Total power required: 7.0 kVA Operating voltage: 380 Volt Machine´s weight about: 320 kg Machine´s weight about: 4100 kg Overall dimensions machine: Length: 3700 mm Width: 2110 mm Height: 2700 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 500 mm Table width: 400 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Max. distance from the table and sleeve: 150/450 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Working head: way rapid feed (Z): 300 mm max. electrode weight: 50 kg Dielectric aggregate: Contents: 410 l Generator: Power: 64 A Total power required: 7.5 kVA Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1900 mm Width: 1690 mm Height: 2800 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

纵向 X： 0 mm 十字 Y： 0 mm 垂直 Z： 0 mm 安培： 0 A CNC 品牌： 0 CNC 型号： 0 技术数据 工件尺寸最大： 长度： 900 mm 宽度： 520 mm 高度： 270 mm 工作台载荷 最大： 500 kg 纵向横移 （X 轴）： 320 mm 横移 （Y 轴）： 220 mm 垂直行程 （Z 轴）： 270 mm 锥形切割 +/-： 30 电极丝直径： 从： 0.25 mm 到： 0.30 mm 整机尺寸： 长度： 3400 mm 宽度： 2400 mm 高度： 2300 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

纵向 X： 0 毫米 十字 Y： 0 毫米 垂直 Z： 0 毫米 安培： 0 A 马赫内径     4003 制作         夏米尔 类型           机器人形态 200 1990年          尺寸 长度    3000 mm 宽度     1600 mm 高度    2500 mm

纵向 X： 0 毫米 十字 Y： 0 毫米 垂直 Z： 0 毫米 安培： 0 A 位置 ATC： 0 储罐内容物： 0 马赫-id   4000 默克·   哈米尔斯 类型      机器人形态 31 1996年