二手 BOMAR 出售

自动带锯博玛 最大直径： Ø 250 mm 卡盘的液压夹紧 切割直线和角切割 自动下降 可以手动或自动工作 2 刀片的转速 润滑泵 电压： 380 V 长： 2000毫米 深度： 1800 mm 总高度： 1800 mm 重量： 约 1，5 T

电子长度止动器 BOMAR 型 ROLBO 有效长度： 3000 mm 有效工作台宽度： 330 mm t可调节高度从500 mm到1100 mm 工作台总长度： 3450 mm 8 种内存长度可选 电压：220 V 单声道

型号： STG 230 GANC 型号：SR-230 编号：SR-230/070/199 连接：3x400V EL盒：ASTP

切割直径： 345 mm 锯带尺寸： 4780 x 32（34） x 1,1 mm 切割宽度： s. Abbildung mm 冷却液泵：Typ 2C0P1-14H 冷却液容量： 50 dm³ 输出： 2,6 角度可调范围 - 至： -45 bis +60 机器的等级 重量 约： 630 kg 尺寸： 约 2400 x 845 x 1430 mm

cutting diameter: 165 mm saw band length: 2400 x 0,90 x 20 mm cutting width: 225 mm band speed: 35 7 70 m/min Capacity 90° rectangular: 225 x 160 mm : 225 x 160 mm : 165 x 165 mm : 165 mm Capacity 90° rectangular: 170 x 100 mm : 155 x 155 mm : 155 x 155 mm capacity 60 degrees: round: 65 mm capacity 60 degrees: flat: 110 y 60 mm capacity 60 degrees: square: 60 x 60 mm total power requirement: kW weight of the machine ca.: 150 kg dimensions of the machine ca.: 1100 x 450 x 1350 mm base: Coolant System: pneumatic clamping: miter device: saw bands: Operating Instructions: manual band saw machine for industrial work developed. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 4335 x 32(34) x 1,1 mm cutting width: mm total power requirement: 3,0 kW weight of the machine ca.: 1,27 t dimensions of the machine ca.: 2,4 x 1,750 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after agreement possibility of inspection. Size: 1494x1137x1243 mm Dimension of saw band: 2910x27(25)x0,90mm Weight: 358 kg Supply voltage: 3x400 V TN-C-S Motor power: 1.0/1.5 kW Total power input: 1.7 kW Degree of protection: IP 54 Maximum overcurrent protection: 16 A Rated speed: 2800/1420 m/min Cutting speed: 40 / 80 m/min

Equipped with material clamp, pneumatic lifting + lowering, including various spare saw belts

Capacity 275 x 230 mm Manually operated, with bag cylinder Cooling pump Quick-release clamp

Capacity 410 x 260 mm Double-sided miter Semi-automatic Mist lubrication system Digital angle readout

Multi-sided semi-automatic band saw with double-sided angle cuts in the range -60° to +60°. The smallest cut diameter 5 mm The length of the shortest rest 30 mm The height of the material 760 mm The dimensions of the saw band (L × H × W) 3800 × (25) 27 × 0.9 mm The power of the saw band drive 1.5 kW The speed of the saw band 20 ÷ 90 m·min-1 Single feed length 3 kVA Machine dimensions (W × D × H) 1388 × 1950 × 1209mm Weight 493 kg. Machine in good technical condition. Roller track sections 5m+3m located outside, showing signs of corrosion.

The machine is in good technical condition. Round material 260mm. Maintained regularly. Can be shown in operation.