描述: |
窗户装置 WEINIG Univar 6 P
二手机
Number of boring spindles: 3 St. Number of tools: 1.3/4.1.
St. Spindle diameter: 50,40 mm Spindle length: 120,320,125
mm weight: 2500 kg loading dimensions L x W x H:
3800x1400x2000 mm table length: 3470 mm Weinig Univar 6
P In order to sell ---------------------- Operating
voltage: 380 volts, 50 periods.
For milling around windows,
doors and similar with uneven edges Profiles.
Arrangement
of the aggregates: 1. Synchronous spindle on the right,
pneumatically clocked. 2. Profiling spindle on the right 3.
Fitting spindle
Profiling spindle suitable for holding
several tools one on top of the other. Spindle movement
pneumatic.
The 1 spindle works in synchronization for
tear-free milling. Respectively This spindle plunges the last 100
mm of a frame end with the Insert the appropriate tool into the
wood to prevent tearing at the frame
corners avoid.
Machine stands, tables,
stops: Machine body made of heavy, torsion-free and
vibration-damping elements. Stops on the right in the profiling
area made of Pertinax. Before Profiling spindle a split stop with
sliding bar for short parts. Additional opening rail for large
format frames.
Feed system: Continuous, chainless feed
equipped with rubber rollers. Blow-off device for feed rollers and
table.
Spindles, hood: Spindles with high concentricity
and dynamically balanced. Extraction hoods designed for the
cheapest chip flow. Easiest tool change Quick-opening hood
lid.
Machine operation, setting aids: Operating the
machine from the front. Setting the stops for Tool diameter using
mechanical number display.
Machine electrics, motors,
controls: Electrical design according to DIN VDE 0113 - Electrical
equipment from Industrial machines EN 60204 IEC 204-1. Further
electrical regulations are not taken into account.
Engines
dynamically balanced.
Control of tool positions via selector
switch on the control panel.
Tools: Machine equipped with
operating tools, but without Editing tools.
SPINDLE
1
Synchronous spindle Number of tools: 1 Spindle
speed: 6000 rpm Spindle diameter: 50mm Tool clamping length:
120 mm Tool diameter max. (milling): 232 mm Tool zero flight
circle: 112-140 mm Basic position under table: 10 mm Motor
strength: 4 KW (5.5 KW)
SPINDLE 2
Number of tools:
4 Spindle stroke vertical: 3 x 80 mm = 4 tools Can be switched
to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle
diameter: 50mm Tool clamping length: 320 mm
Feed
profiling unit: 8 m/min Feed roller width: 50mm/35mm Feed
roller diameter: 95 mm Stop height: 70 mm Working width: min.
30 mm, max. 220 mm Working height: min. 30 mm, max.
100mm Workpiece length without tenon: min. 245
mm
Tool diameter max. For zero diameter 112 mm: 210
mm For zero diameter 140 mm: 232 mm Tool diameter max.
(milling): 232 mm Tool zero flight circle: 112-140 mm Basic
position under table: 10/5 mm Motor strength: Spindle: 11 KW Feed:
1.1 KW Feed profiling unit: continuously 6-12 m/min Feed
roller width: 50 G612123 mm Feed roller diameter: 95 mm Stop
height: 70 mm Working width: min. 30 mm, max. 220 mm Working
height: min. 30 mm, max. 100mm Workpiece length without tenon:
min. 245 mm
Special equipment:
3 Mechanical spindle
brake for synchronous spindle, profiling spindle and Additional
aggregates
SPINDLE 3
1 fitting milling unit, right:
for milling the fitting groove in the Milling pass or for grooving
in the longitudinal profile. Pneumatic horizontal movement with
selector switch in the control panel. Motor power: 2.2
KW Speed: 6000 rpm Spindle diameter: 40mm Clamping height:
125 mm Tool flight circle: min. 140 mm, max. 180 mm Basic
position below table level: 10 mm
Motor reinforcement for
synchronous spindle from 4 KW to 7.5 KW
Motor reinforcement
for profiling spindle from 5.5 KW to 11 KW
Screen controls
for 99 window types. 1 type can hold up to 8 different
parts contain. Manufacturing options: individual parts, milling.
Data entry via Keyboard with integrated operator guidance and
error diagnosis. Free-standing control
cabinet ---------------------------------
(technical data
according to manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-6827
|