描述: |
窗户装置 WEINIG Univar 10/3
二手机
Number of spindles: 4 St. Number of tools: 11 St. Spindle
diameter: 50,40 mm Spindle length: 285,125 mm length: 4000
mm width: 2000 mm height: 2200 mm Weinig Univar 10/3
folding machine --------------------------------- Machine will
be cleaned and chcked before delivery
For milling around
windows, doors and the like with uneven circumferential profiles.
Machine suitable for wood thickness 68 to 92 mm
Time required
per frame milling, medium size 1.20 x 1.20 m - approx. 2
minutes.
The available tool positions are selected using a
selector switch on the control
panel retrieved.
Machine with 3 hydraulically controlled
right precision Lifting spindles for holding 3 tool sets, 2 x 95
mm spindle stroke per spindle The spindle stroke takes place in a
U-movement, so that the opening is possible for short
parts The milling stop remains as small as possible. Spindle
stroke horizontally fine Adjustable for both tool positions from
the operator side. Central lubrication for the spindle
units.
The 1. Spindle can be selected in right-left
rotation.
This spindle dips the last 100 mm of each frame
end appropriate synchronization tool into the passing wood.
Through this This prevents the tool of the subsequent milling
spindle from running in the opposite direction working,
causing tearouts. Excavation of the first 7 transport rollers
using Footswitch. This shortens the lead time. An
additional The support rail also allows large-format frames to be
milled around.
Continuous, chainless rubber roller feed with
extreme short roller spacing. Height adjustment of the feed
bar electrically readable.
Electrical version according
to VDE.
Machine including operating tools, but without
processing tools tools.
Technical data:
Working
width min. 40 mm Working height min. 30 mm, max. 100
mm
1. Profiling spindle (synchronous and
counter-rotation) ------------------------------------------------
-- -- Motor strength lifting spindle 11.0 kW Spindle speed
6000 rpm Spindle diameter 50 mm Clamping length 285
mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232
mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic
position under table 10 mm (adjustable up to 20 mm) Spindle stroke
horizontal 80 mm with synchronous automatic immersion
2. Profiling
spindle ---------------------- Motor strength lifting spindle
11.0 kW Spindle speed 6000 rpm Spindle diameter 50
mm Clamping length 285 mm Tool zero flight circle 112 - 140
mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm
for 3 tools Basic position under table 10 mm (adjustable up to 20
mm) Spindle stroke horizontal 80 mm
3. Profiling
spindle ---------------------- Motor strength lifting spindle
11.0 kW Spindle speed 6000 rpm Spindle diameter 50
mm Clamping length 285 mm Tool zero flight circle 112 - 140
mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm
for 3 tools Basic position under table 10 mm (adjustable up to 20
mm) Spindle stroke horizontal 80 mm
4. Profile spindle -
fitting unit on the
right ------------------------------------------------- For
milling the fitting groove in the milling cycle or for grooving in
the longitudinal profile. Pneumatic horizontal G612123 movement
with Selector switch in the control panel. Motor 2.2
KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height
125 mm, 2 tools Tool flight circle min. 140 mm, max. 180
mm
Motor power feed 1.1 kW Feed speed 6 - 12
m/min. Feed rollers - D : 95 mm Feed roller width 50/30
mm Feed roller spacing 100/120
mm --------------------------------
Screen control with
150 programs. 1 program is each 1 individual part and includes 2
end profiles and 1 longitudinal profile. Pro programs are for end
processing 20 different profiles can be selected
for Longitudinal machining of 40 different profiles 1 can be
selected (in turning mode 2).
When manufacturing, e.g. a
frame, up to 8 different programs (parts) can be
saved.
The program memory can be organized so that up
to 18 frames or sashes with a maximum of 8 parts each can be
stored.
Manufacturing options: - Individual parts -
Double parts - frame by frame - in series -
Milling
Data entry via keyboard with integrated Operator
guidance and error
diagnosis. ---------------------------------- Length:
4000mm (Length of frame milling ruler: 4500 mm) Width:
2000mm Height: 2200mm
(Technical information according to
the manufacturer, no guarantee!)
The data
for this ad was created with ModulMWS - the software solution of
LogoTech oHG.
seller offer No. resale 1305-2706
|